MAX3232CPWRG4 vs MAX3232EIPWRQ1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MAX3232CPWRG4 بواسطة Texas Instruments و MAX3232EIPWRQ1 بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4 ✓ نشطTexas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ نشطمقارنة المواصفات
| المعامل | MAX3232CPWRG4 | MAX3232EIPWRQ1 |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 line driver/receiver (transceiver) IC | — |
| Number of Line Drivers | 2 | — |
| Number of Line Receivers | 2 | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection (Terminal to Terminal) | +/-15 kV | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Charge Pump | Dual on-chip charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 (C1+, C1-, C2+, C2-) | — |
| العلبة | 16-pin TSSOP (PW) | 16-pin TSSOP |
| نوع التركيب | Surface Mount | Surface mount |
| Logic Levels (Driver Input / Receiver Output) | CMOS/TTL compatible | — |
| Transceiver Configuration | 2/2 (two drivers, two receivers) | 2/2 full-duplex |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current (Quiescent) | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Slew Rate | [DATA_NEEDED: RS-232 driver slew rate] | — |
| Receiver Fail-Safe Biasing | [DATA_NEEDED: receiver fail-safe characteristics] | — |
| حالة RoHS | Compliant (G4 suffix denotes lead-free green package) | [DATA_NEEDED: RoHS compliance status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | ITU V.28 |
| ESD Protection | — | ±15 kV IEC, pin-to-pin |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |