MAX3232CPWRG4 vs MAX3232EIPWRQ1 موازنہ
تفصیلی ساتھ ساتھ موازنہ از MAX3232CPWRG4 بذریعہ Texas Instruments اور MAX3232EIPWRQ1 بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4 ✓ فعالTexas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | MAX3232CPWRG4 | MAX3232EIPWRQ1 |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | RS-232 line driver/receiver (transceiver) IC | — |
| Number of Line Drivers | 2 | — |
| Number of Line Receivers | 2 | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection (Terminal to Terminal) | +/-15 kV | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Charge Pump | Dual on-chip charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 (C1+, C1-, C2+, C2-) | — |
| پیکیج | 16-pin TSSOP (PW) | 16-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface mount |
| Logic Levels (Driver Input / Receiver Output) | CMOS/TTL compatible | — |
| Transceiver Configuration | 2/2 (two drivers, two receivers) | 2/2 full-duplex |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current (Quiescent) | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Slew Rate | [DATA_NEEDED: RS-232 driver slew rate] | — |
| Receiver Fail-Safe Biasing | [DATA_NEEDED: receiver fail-safe characteristics] | — |
| RoHS اسٹیٹس | Compliant (G4 suffix denotes lead-free green package) | [DATA_NEEDED: RoHS compliance status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | ITU V.28 |
| ESD Protection | — | ±15 kV IEC, pin-to-pin |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |