MAX3232CPWRG4 vs MAX3232EIPWRQ1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3232CPWRG4 tarafından Texas Instruments ve MAX3232EIPWRQ1 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4 ✓ AktifTexas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX3232CPWRG4 | MAX3232EIPWRQ1 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-232 line driver/receiver (transceiver) IC | — |
| Number of Line Drivers | 2 | — |
| Number of Line Receivers | 2 | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection (Terminal to Terminal) | +/-15 kV | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Charge Pump | Dual on-chip charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 (C1+, C1-, C2+, C2-) | — |
| Paket | 16-pin TSSOP (PW) | 16-pin TSSOP |
| Montaj Türü | Surface Mount | Surface mount |
| Logic Levels (Driver Input / Receiver Output) | CMOS/TTL compatible | — |
| Transceiver Configuration | 2/2 (two drivers, two receivers) | 2/2 full-duplex |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current (Quiescent) | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Slew Rate | [DATA_NEEDED: RS-232 driver slew rate] | — |
| Receiver Fail-Safe Biasing | [DATA_NEEDED: receiver fail-safe characteristics] | — |
| RoHS Durumu | Compliant (G4 suffix denotes lead-free green package) | [DATA_NEEDED: RoHS compliance status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | ITU V.28 |
| ESD Protection | — | ±15 kV IEC, pin-to-pin |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |