MAX3232CPWRG4 vs MAX3232EIPWRQ1 So sánh
So sánh chi tiết song song của MAX3232CPWRG4 bằng Texas Instruments và MAX3232EIPWRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4 ✓ Hoạt độngTexas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3232CPWRG4 | MAX3232EIPWRQ1 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | RS-232 line driver/receiver (transceiver) IC | — |
| Number of Line Drivers | 2 | — |
| Number of Line Receivers | 2 | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection (Terminal to Terminal) | +/-15 kV | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Charge Pump | Dual on-chip charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 (C1+, C1-, C2+, C2-) | — |
| Hộp | 16-pin TSSOP (PW) | 16-pin TSSOP |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Logic Levels (Driver Input / Receiver Output) | CMOS/TTL compatible | — |
| Transceiver Configuration | 2/2 (two drivers, two receivers) | 2/2 full-duplex |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current (Quiescent) | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Slew Rate | [DATA_NEEDED: RS-232 driver slew rate] | — |
| Receiver Fail-Safe Biasing | [DATA_NEEDED: receiver fail-safe characteristics] | — |
| Trạng thái RoHS | Compliant (G4 suffix denotes lead-free green package) | [DATA_NEEDED: RoHS compliance status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | ITU V.28 |
| ESD Protection | — | ±15 kV IEC, pin-to-pin |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |