MCZ33887EKR2 vs MCZ33887EK Comparison
Detailed side-by-side comparison of MCZ33887EKR2 by NXP Semiconductors and MCZ33887EK by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP
MCZ33887EKR2 ✓ ActiveNXP Semiconductors
MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP
MCZ33887EK ✓ ActiveSpecification Comparison
| Parameter | MCZ33887EKR2 | MCZ33887EK |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $5.34 | $5.74 |
| Function | H-Bridge motor driver with load current feedback | — |
| Output Configuration | Full H-Bridge (4 FETs) | — |
| Supply Voltage | 5 V to 28 V | 5 V to 28 V |
| Continuous Output Current | 5.0 A | 5 A |
| On-State Resistance (RDS(on) per leg) | 120 mOhm (typical) | — |
| Package / Case | 54-SSOP (0.295 inch / 7.50 mm width) Exposed Pad | — |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Load Current Feedback | Yes (analog output proportional to load current) | Yes (analog current sense output) |
| Control Interface | Parallel logic (IN1, IN2 / PWM, Enable) | Parallel logic (IN1, IN2, EN, D1, D2) |
| Charge Pump | Internal (external capacitor only) | — |
| Current Limit | Programmable via external reference resistor | — |
| Fault Protection | Overcurrent, overtemperature, undervoltage [DATA_NEEDED: detailed list] | — |
| RoHS Status | Compliant [DATA_NEEDED: per latest datasheet revision] | Compliant |
| Moisture Sensitivity Level (MSL) | [DATA_NEEDED: MSL rating] | — |
| Load Type | DC motor, solenoid, resistive/inductive | — |
| Topology | — | H-Bridge (4 N-channel MOSFETs) |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| On-State Resistance (HS + LS) | — | 120 mOhm |
| PWM Frequency (max) | — | [DATA_NEEDED: max PWM frequency] |
| Operating Temperature (Junction) | — | -40 C to +150 C |
| Package | — | 54-HSOP (Heatsink SOIC) with Exposed Pad |
| Thermal Resistance (Theta_JC) | — | 1.0 C/W |
| AEC-Q100 Qualification | — | Qualified |
| MSL Level | — | 3 |
| Protection Features | — | Overcurrent, Overtemperature, UVLO, Shoot-Through |