MCZ33887EKR2 vs MCZ33887EK 비교
다음의 상세 나란히 비교: MCZ33887EKR2 제조: NXP Semiconductors 및 MCZ33887EK 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MCZ33887EKR2 - 5A H-Bridge Driver w/ Load Current Feedback | NXP
MCZ33887EKR2 ✓ 활성NXP Semiconductors
MCZ33887EK - 5A H-Bridge Motor Driver with Load Current Feedback | NXP
MCZ33887EK ✓ 활성사양 비교
| 파라미터 | MCZ33887EKR2 | MCZ33887EK |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Motor Drivers | Motor Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.34 | $5.74 |
| 기능 | H-Bridge motor driver with load current feedback | — |
| 출력 구성 | Full H-Bridge (4 FETs) | — |
| 공급 전압 | 5 V to 28 V | 5 V to 28 V |
| Continuous Output Current | 5.0 A | 5 A |
| On-State Resistance (RDS(on) per leg) | 120 mOhm (typical) | — |
| 패키지 / 케이스 | 54-SSOP (0.295 inch / 7.50 mm width) Exposed Pad | — |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Load Current Feedback | Yes (analog output proportional to load current) | Yes (analog current sense output) |
| Control Interface | Parallel logic (IN1, IN2 / PWM, Enable) | Parallel logic (IN1, IN2, EN, D1, D2) |
| Charge Pump | Internal (external capacitor only) | — |
| 전류 제한 | Programmable via external reference resistor | — |
| Fault Protection | Overcurrent, overtemperature, undervoltage [DATA_NEEDED: detailed list] | — |
| RoHS 상태 | Compliant [DATA_NEEDED: per latest datasheet revision] | Compliant |
| 습도 민감도 레벨 (MSL) | [DATA_NEEDED: MSL rating] | — |
| Load Type | DC motor, solenoid, resistive/inductive | — |
| 토폴로지 | — | H-Bridge (4 N-channel MOSFETs) |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| On-State Resistance (HS + LS) | — | 120 mOhm |
| PWM Frequency (max) | — | [DATA_NEEDED: max PWM frequency] |
| Operating Temperature (Junction) | — | -40 C to +150 C |
| 패키지 | — | 54-HSOP (Heatsink SOIC) with Exposed Pad |
| Thermal Resistance (Theta_JC) | — | 1.0 C/W |
| AEC-Q100 Qualification | — | Qualified |
| MSL 레벨 | — | 3 |
| Protection Features | — | Overcurrent, Overtemperature, UVLO, Shoot-Through |