MPX2010D vs MPX2010DP Comparison
Detailed side-by-side comparison of MPX2010D by STMicroelectronics and MPX2010DP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPX2010D - 10kPa Differential Pressure Sensor | STMicroelectronics
MPX2010D ✓ ActiveSpecification Comparison
| Parameter | MPX2010D | MPX2010DP |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $9.10 | $8.50 |
| Pressure Type | Differential (Port 1 vs Port 2) | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | 75 kPa |
| Output Type | Analog Wheatstone Bridge (mV) | Analog voltage, Wheatstone bridge (mV level) |
| Output Voltage Span | 0 mV to 25 mV at 10V excitation | — |
| Sensitivity | 2.5 mV/kPa (nominal, at 10V excitation) | — |
| Excitation Voltage | 10 V (typical), 16 V (maximum) | — |
| Linearity | 0.1% of full-scale (typical) | ±0.05% (typ) |
| Operating Temperature Range | 0 C to +85 C | — |
| Storage Temperature Range | [DATA_NEEDED: storage temperature range] | — |
| Package / Case | 4-SIP Module (Case 344-15) | — |
| Mounting Type | Through-Hole | — |
| Number of Pins | 4 | — |
| On-Chip Temperature Compensation | Yes (laser trimmed) | — |
| Bridge Configuration | 4-arm piezoresistive Wheatstone | — |
| RoHS Status | [DATA_NEEDED: RoHS status from ST datasheet] | Compliant |
| Sensor Family | MPX2010 / MPXV2010G / MPXM2010 | — |
| Diaphragm Type | Single monolithic silicon | — |
| Sensor Type | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Supply Voltage | — | 10 V DC typical (max 16 V) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Operating Temperature | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |