MPX2010D vs MPX2010DP 비교

다음의 상세 나란히 비교: MPX2010D 제조: STMicroelectronics 및 MPX2010DP 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ 활성

사양 비교

파라미터 MPX2010D MPX2010DP
브랜드 STMicroelectronics NXP Semiconductors
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $9.10 $8.50
Pressure Type Differential (Port 1 vs Port 2) —
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] 75 kPa
출력 유형 Analog Wheatstone Bridge (mV) Analog voltage, Wheatstone bridge (mV level)
Output Voltage Span 0 mV to 25 mV at 10V excitation —
Sensitivity 2.5 mV/kPa (nominal, at 10V excitation) —
Excitation Voltage 10 V (typical), 16 V (maximum) —
Linearity 0.1% of full-scale (typical) ±0.05% (typ)
동작 온도 범위 0 C to +85 C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
패키지 / 케이스 4-SIP Module (Case 344-15) —
실장 유형 Through-Hole —
핀 수 4 —
On-Chip Temperature Compensation Yes (laser trimmed) —
Bridge Configuration 4-arm piezoresistive Wheatstone —
RoHS 상태 [DATA_NEEDED: RoHS status from ST datasheet] Compliant
Sensor Family MPX2010 / MPXV2010G / MPXM2010 —
Diaphragm Type Single monolithic silicon —
센서 유형 — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
공급 전압 — 10 V DC typical (max 16 V)
Temperature Compensation — 0 °C to +85 °C (on-chip)
동작 온도 — -40 °C to +125 °C
Response Time — 1.0 ms (typical)
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청