MPX2010D vs MPX2010DP Comparaison

Comparaison détaillée côte à côte de MPX2010D par STMicroelectronics et MPX2010DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Actif

Comparaison des spécifications

Paramètre MPX2010D MPX2010DP
Marque STMicroelectronics NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $9,10 $8,50
Pressure Type Differential (Port 1 vs Port 2) —
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] 75 kPa
Type de sortie Analog Wheatstone Bridge (mV) Analog voltage, Wheatstone bridge (mV level)
Output Voltage Span 0 mV to 25 mV at 10V excitation —
Sensitivity 2.5 mV/kPa (nominal, at 10V excitation) —
Excitation Voltage 10 V (typical), 16 V (maximum) —
Linearity 0.1% of full-scale (typical) ±0.05% (typ)
Plage de température de fonctionnement 0 C to +85 C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Boîtier / Format 4-SIP Module (Case 344-15) —
Type de montage Through-Hole —
Nombre de broches 4 —
On-Chip Temperature Compensation Yes (laser trimmed) —
Bridge Configuration 4-arm piezoresistive Wheatstone —
Statut RoHS [DATA_NEEDED: RoHS status from ST datasheet] Compliant
Sensor Family MPX2010 / MPXV2010G / MPXM2010 —
Diaphragm Type Single monolithic silicon —
Type de capteur — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Tension d'alimentation — 10 V DC typical (max 16 V)
Temperature Compensation — 0 °C to +85 °C (on-chip)
Température de fonctionnement — -40 °C to +125 °C
Response Time — 1.0 ms (typical)
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis