SN75176BPS vs SN75176BDR Comparison
Detailed side-by-side comparison of SN75176BPS by Texas Instruments and SN75176BDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | SN75176BPS | SN75176BDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Supported Standards | RS-422 and RS-485 | TIA/EIA-422-B and TIA/EIA-485-A |
| Standard Compliance | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 | — |
| Driver Count | 1 differential driver | — |
| Receiver Count | 1 differential receiver | — |
| Driver Output States | 3-state | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Package | 8-pin SOIC, 5.30 mm width | SOIC (D), 8 pins |
| Mounting Type | Surface mount | Surface mount |
| Signal Type | Balanced differential | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Communication Direction | Bidirectional | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage | — | 5 V |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Pin Count | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |