SN75176BPS vs SN75176BDR موازنہ
تفصیلی ساتھ ساتھ موازنہ از SN75176BPS بذریعہ Texas Instruments اور SN75176BDR بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | SN75176BPS | SN75176BDR |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Supported Standards | RS-422 and RS-485 | TIA/EIA-422-B and TIA/EIA-485-A |
| Standard Compliance | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 | — |
| Driver Count | 1 differential driver | — |
| Receiver Count | 1 differential receiver | — |
| Driver Output States | 3-state | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| پیکیج | 8-pin SOIC, 5.30 mm width | SOIC (D), 8 pins |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| Signal Type | Balanced differential | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Communication Direction | Bidirectional | — |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| سپلائی کرنٹ | [DATA_NEEDED: supply current] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| سپلائی وولٹیج | — | 5 V |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| پن کی تعداد | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| کوئیسینٹ کرنٹ | — | [DATA_NEEDED: quiescent current] |