SN75176BPS vs SN75176BDR Comparación
Comparación detallada lado a lado de SN75176BPS por Texas Instruments y SN75176BDR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SN75176BPS | SN75176BDR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Supported Standards | RS-422 and RS-485 | TIA/EIA-422-B and TIA/EIA-485-A |
| Standard Compliance | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 | — |
| Driver Count | 1 differential driver | — |
| Receiver Count | 1 differential receiver | — |
| Driver Output States | 3-state | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Encapsulado | 8-pin SOIC, 5.30 mm width | SOIC (D), 8 pins |
| Tipo de montaje | Surface mount | Surface mount |
| Signal Type | Balanced differential | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Communication Direction | Bidirectional | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Tensión de alimentación | — | 5 V |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Recuento de pines | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |