SN75176BPS vs SN75176BDR 비교

다음의 상세 나란히 비교: SN75176BPS 제조: Texas Instruments 및 SN75176BDR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
SN75176BPS SN75176BPS - RS-422/RS-485 Transceiver | Texas Instruments

SN75176BPS - RS-422/RS-485 Transceiver | Texas Instruments

SN75176BPS ✓ 활성
Texas Instruments
SN75176BDR SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR - 8-Pin RS-485/RS-422 Transceiver | TI

SN75176BDR ✓ 활성

사양 비교

파라미터 SN75176BPS SN75176BDR
브랜드 Texas Instruments Texas Instruments
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type Differential bus transceiver Differential bus transceiver
Supported Standards RS-422 and RS-485 TIA/EIA-422-B and TIA/EIA-485-A
Standard Compliance ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 —
Driver Count 1 differential driver —
Receiver Count 1 differential receiver —
Driver Output States 3-state —
Supply Voltage Range 4.75 V to 5.25 V —
패키지 8-pin SOIC, 5.30 mm width SOIC (D), 8 pins
실장 유형 Surface mount Surface mount
Signal Type Balanced differential —
Bus Architecture Multipoint transmission Multipoint transmission
Communication Direction Bidirectional —
동작 온도 범위 [DATA_NEEDED: operating temperature range] 0 °C to 70 °C
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] [DATA_NEEDED: maximum data rate]
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
공급 전류 [DATA_NEEDED: supply current] —
Maximum Input Voltage [DATA_NEEDED: maximum input voltage] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
공급 전압 — 5 V
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
핀 수 — 8 pins
Manufacturer — Texas Instruments
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
대기 전류 — [DATA_NEEDED: quiescent current]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청