SN75176BPS vs SN75176BDR Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN75176BPS tarafından Texas Instruments ve SN75176BDR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | SN75176BPS | SN75176BDR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Supported Standards | RS-422 and RS-485 | TIA/EIA-422-B and TIA/EIA-485-A |
| Standard Compliance | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 | — |
| Driver Count | 1 differential driver | — |
| Receiver Count | 1 differential receiver | — |
| Driver Output States | 3-state | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Paket | 8-pin SOIC, 5.30 mm width | SOIC (D), 8 pins |
| Montaj Türü | Surface mount | Surface mount |
| Signal Type | Balanced differential | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Communication Direction | Bidirectional | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Besleme Akımı | [DATA_NEEDED: supply current] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Besleme Gerilimi | — | 5 V |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Pin Sayısı | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |