SSM2143PZ vs INA137PA Comparison
Detailed side-by-side comparison of SSM2143PZ by Analog Devices and INA137PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices
SSM2143PZ ✓ ActiveSpecification Comparison
| Parameter | SSM2143PZ | INA137PA |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Audio Differential Line Receiver | — |
| Number of Circuits | 1 | — |
| Nominal Gain (G = 1/2) | 0.5 (configurable to 2) | — |
| Output Type | Single-ended | — |
| Slew Rate | 10 V/us typical | 14 V/µs |
| -3 dB Bandwidth | 7 MHz typical | — |
| Common-Mode Rejection (DC) | 90 dB typical | — |
| Common-Mode Rejection (60 Hz) | 90 dB typical | — |
| Common-Mode Rejection (20 kHz) | 85 dB typical | — |
| Total Harmonic Distortion + Noise | 0.0006 % typical at 1 kHz; <0.004 % full audio band | — |
| Supply Current | 2.7 mA typical | — |
| Supply Voltage Range (Dual) | ±6 V to ±18 V | — |
| Supply Voltage Range (Single) | 6 V to 36 V | — |
| Maximum Differential Input | +28 dBu at G = 1/2 | — |
| Operating Temperature | -40 C to +85 C | — |
| Package | 8-PDIP (PZ), 0.300 in / 7.62 mm | 8-pin PDIP |
| Mounting Type | Through-Hole | Through-hole |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single audio differential line receiver |
| Number of Channels | — | 1 channel |
| Fixed Gain | — | 1/2 (-6 dB) or 2 (+6 dB) |
| Supply Voltage Range | — | ±18 V |
| Total Supply Voltage | — | 36 V |
| Distortion | — | 0.0005% at 1 kHz |
| Common-Mode Rejection Ratio | — | 90 dB |
| Quiescent Current | — | 2.9 mA maximum |
| Settling Accuracy | — | 0.01% |
| Internal Resistors | — | On-chip precision resistors |
| Input Signal Type | — | Differential audio signal |
| Output Configuration | — | Single-ended |
| Gain Configurations | — | Resistor reversal selects -6 dB or +6 dB |
| Bandwidth | — | [DATA_NEEDED: bandwidth] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |