SSM2143PZ vs INA137PA Vergleich
Detaillierter Direktvergleich von SSM2143PZ von Analog Devices und INA137PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices
SSM2143PZ ✓ AktivSpezifikationsvergleich
| Parameter | SSM2143PZ | INA137PA |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Audio Differential Line Receiver | — |
| Number of Circuits | 1 | — |
| Nominal Gain (G = 1/2) | 0.5 (configurable to 2) | — |
| Ausgangstyp | Single-ended | — |
| Slew Rate | 10 V/us typical | 14 V/µs |
| -3 dB Bandwidth | 7 MHz typical | — |
| Common-Mode Rejection (DC) | 90 dB typical | — |
| Common-Mode Rejection (60 Hz) | 90 dB typical | — |
| Common-Mode Rejection (20 kHz) | 85 dB typical | — |
| Total Harmonic Distortion + Noise | 0.0006 % typical at 1 kHz; <0.004 % full audio band | — |
| Versorgungsstrom | 2.7 mA typical | — |
| Supply Voltage Range (Dual) | ±6 V to ±18 V | — |
| Supply Voltage Range (Single) | 6 V to 36 V | — |
| Maximum Differential Input | +28 dBu at G = 1/2 | — |
| Betriebstemperatur | -40 C to +85 C | — |
| Gehäuse | 8-PDIP (PZ), 0.300 in / 7.62 mm | 8-pin PDIP |
| Montageart | Through-Hole | Through-hole |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single audio differential line receiver |
| Number of Channels | — | 1 channel |
| Fixed Gain | — | 1/2 (-6 dB) or 2 (+6 dB) |
| Supply Voltage Range | — | ±18 V |
| Total Supply Voltage | — | 36 V |
| Distortion | — | 0.0005% at 1 kHz |
| Common-Mode Rejection Ratio | — | 90 dB |
| Ruhestrom | — | 2.9 mA maximum |
| Settling Accuracy | — | 0.01% |
| Internal Resistors | — | On-chip precision resistors |
| Input Signal Type | — | Differential audio signal |
| Ausgangskonfiguration | — | Single-ended |
| Gain Configurations | — | Resistor reversal selects -6 dB or +6 dB |
| Bandwidth | — | [DATA_NEEDED: bandwidth] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |