SSM2143PZ vs INA137PA तुलना

विस्तृत दोनों ओर की तुलना SSM2143PZ द्वारा Analog Devices और INA137PA द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
SSM2143PZ SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices

SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices

SSM2143PZ ✓ सक्रिय
Texas Instruments
INA137PA INA137PA - ±6dB Audio Differential Receiver | Texas Instruments

INA137PA - ±6dB Audio Differential Receiver | Texas Instruments

INA137PA ✓ सक्रिय

विशेषता तुलना

पैरामीटर SSM2143PZ INA137PA
ब्रांड Analog Devices Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Amplifier Type Audio Differential Line Receiver —
Number of Circuits 1 —
Nominal Gain (G = 1/2) 0.5 (configurable to 2) —
आउटपुट प्रकार Single-ended —
Slew Rate 10 V/us typical 14 V/µs
-3 dB Bandwidth 7 MHz typical —
Common-Mode Rejection (DC) 90 dB typical —
Common-Mode Rejection (60 Hz) 90 dB typical —
Common-Mode Rejection (20 kHz) 85 dB typical —
Total Harmonic Distortion + Noise 0.0006 % typical at 1 kHz; <0.004 % full audio band —
सप्लाई करंट 2.7 mA typical —
Supply Voltage Range (Dual) ±6 V to ±18 V —
Supply Voltage Range (Single) 6 V to 36 V —
Maximum Differential Input +28 dBu at G = 1/2 —
ऑपरेटिंग तापमान -40 C to +85 C —
पैकेज 8-PDIP (PZ), 0.300 in / 7.62 mm 8-pin PDIP
माउंटिंग प्रकार Through-Hole Through-hole
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Product Type — Single audio differential line receiver
Number of Channels — 1 channel
Fixed Gain — 1/2 (-6 dB) or 2 (+6 dB)
Supply Voltage Range — ±18 V
Total Supply Voltage — 36 V
Distortion — 0.0005% at 1 kHz
Common-Mode Rejection Ratio — 90 dB
क्वाइसेंट करंट — 2.9 mA maximum
Settling Accuracy — 0.01%
Internal Resistors — On-chip precision resistors
Input Signal Type — Differential audio signal
आउटपुट कॉन्फ़िगरेशन — Single-ended
Gain Configurations — Resistor reversal selects -6 dB or +6 dB
Bandwidth — [DATA_NEEDED: bandwidth]
Input Impedance — [DATA_NEEDED: input impedance]
Output Impedance — [DATA_NEEDED: output impedance]
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध