SSM2143PZ vs INA137PA Comparação

Comparação detalhada lado a lado de SSM2143PZ por Analog Devices e INA137PA por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Comparação de especificações

Parâmetro SSM2143PZ INA137PA
Marca Analog Devices Texas Instruments
Categoria Amplifier ICs Amplifier ICs
Status do ciclo de vida Ativo Ativo
Amplifier Type Audio Differential Line Receiver —
Number of Circuits 1 —
Nominal Gain (G = 1/2) 0.5 (configurable to 2) —
Tipo de saída Single-ended —
Slew Rate 10 V/us typical 14 V/µs
-3 dB Bandwidth 7 MHz typical —
Common-Mode Rejection (DC) 90 dB typical —
Common-Mode Rejection (60 Hz) 90 dB typical —
Common-Mode Rejection (20 kHz) 85 dB typical —
Total Harmonic Distortion + Noise 0.0006 % typical at 1 kHz; <0.004 % full audio band —
Corrente de alimentação 2.7 mA typical —
Supply Voltage Range (Dual) ±6 V to ±18 V —
Supply Voltage Range (Single) 6 V to 36 V —
Maximum Differential Input +28 dBu at G = 1/2 —
Temperatura de operação -40 C to +85 C —
Encapsulamento 8-PDIP (PZ), 0.300 in / 7.62 mm 8-pin PDIP
Tipo de montagem Through-Hole Through-hole
Status RoHS Compliant [DATA_NEEDED: RoHS status]
Product Type — Single audio differential line receiver
Number of Channels — 1 channel
Fixed Gain — 1/2 (-6 dB) or 2 (+6 dB)
Supply Voltage Range — ±18 V
Total Supply Voltage — 36 V
Distortion — 0.0005% at 1 kHz
Common-Mode Rejection Ratio — 90 dB
Corrente de repouso — 2.9 mA maximum
Settling Accuracy — 0.01%
Internal Resistors — On-chip precision resistors
Input Signal Type — Differential audio signal
Configuração de saída — Single-ended
Gain Configurations — Resistor reversal selects -6 dB or +6 dB
Bandwidth — [DATA_NEEDED: bandwidth]
Input Impedance — [DATA_NEEDED: input impedance]
Output Impedance — [DATA_NEEDED: output impedance]
Faixa de temperatura de operação — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação