SSM2143PZ vs INA137PA Comparación
Comparación detallada lado a lado de SSM2143PZ por Analog Devices y INA137PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices
SSM2143PZ ✓ ActivoComparación de especificaciones
| Parámetro | SSM2143PZ | INA137PA |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Audio Differential Line Receiver | — |
| Number of Circuits | 1 | — |
| Nominal Gain (G = 1/2) | 0.5 (configurable to 2) | — |
| Tipo de salida | Single-ended | — |
| Slew Rate | 10 V/us typical | 14 V/µs |
| -3 dB Bandwidth | 7 MHz typical | — |
| Common-Mode Rejection (DC) | 90 dB typical | — |
| Common-Mode Rejection (60 Hz) | 90 dB typical | — |
| Common-Mode Rejection (20 kHz) | 85 dB typical | — |
| Total Harmonic Distortion + Noise | 0.0006 % typical at 1 kHz; <0.004 % full audio band | — |
| Corriente de alimentación | 2.7 mA typical | — |
| Supply Voltage Range (Dual) | ±6 V to ±18 V | — |
| Supply Voltage Range (Single) | 6 V to 36 V | — |
| Maximum Differential Input | +28 dBu at G = 1/2 | — |
| Temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | 8-PDIP (PZ), 0.300 in / 7.62 mm | 8-pin PDIP |
| Tipo de montaje | Through-Hole | Through-hole |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single audio differential line receiver |
| Number of Channels | — | 1 channel |
| Fixed Gain | — | 1/2 (-6 dB) or 2 (+6 dB) |
| Supply Voltage Range | — | ±18 V |
| Total Supply Voltage | — | 36 V |
| Distortion | — | 0.0005% at 1 kHz |
| Common-Mode Rejection Ratio | — | 90 dB |
| Corriente en reposo | — | 2.9 mA maximum |
| Settling Accuracy | — | 0.01% |
| Internal Resistors | — | On-chip precision resistors |
| Input Signal Type | — | Differential audio signal |
| Configuración de salida | — | Single-ended |
| Gain Configurations | — | Resistor reversal selects -6 dB or +6 dB |
| Bandwidth | — | [DATA_NEEDED: bandwidth] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |