THS6052CDR vs THS6062CD Comparison
Detailed side-by-side comparison of THS6052CDR by Texas Instruments and THS6062CD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)
THS6052CDR ✓ ActiveTexas Instruments
THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments
THS6062CD ✓ ActiveSpecification Comparison
| Parameter | THS6052CDR | THS6062CD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | ADSL CPE and PLC line driver | — |
| Output Current | 175 mA | — |
| Supply Voltage Range | ±12 V | — |
| Noninverting Current Noise Density | 2.7 pA/√Hz | — |
| Number of Drivers | 2 | — |
| Supported Application | Full-rate ADSL and G.Lite | — |
| Transformer Ratio Compatibility | 1:1 | — |
| Package | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC, 3.90 mm width |
| Mounting Type | Surface Mount | Surface mount |
| Operating Temperature | 0 °C to +70 °C | — |
| Logic/Interface Type | Driver | — |
| Number of Pins | 8 | 8 |
| Line-Driver Topology | High-current differential line-driver application | — |
| Downstream Noise Reduction | Reduces noise feedback through hybrid into downstream channel | — |
| Manufacturer Product Page | Texas Instruments THS6052 product page | — |
| Distributor Unit Price | $4.4981 per unit as of 2026-10-29 | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Pin Configuration | [DATA_NEEDED: complete pin configuration and pin names] | — |
| Receiver Configuration | — | Dual differential receiver |
| Gain-Bandwidth Product | — | 100 MHz |
| Input Voltage-Noise Density | — | 1.6 nV/√Hz |
| Slew Rate | — | 100 V/µs |
| Typical Output Drive Current | — | 90 mA |
| Minimum Stable Gain | — | 2 V/V |
| Inverted Stable Gain | — | -1 V/V |
| THD at 1 MHz | — | -72 dBc |
| THD at 1 MHz, Alternate Condition | — | -90 dBc |
| Single-Supply Operation | — | 5 V |
| Dual-Supply Operation | — | ±5 V |
| Typical Maximum Supply Configuration | — | ±15 V |
| Number of Channels | — | 2 |
| Amplifier Architecture | — | Voltage feedback |
| Target Application | — | ADSL data communication |