THS6052CDR vs THS6062CD مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ THS6052CDR بواسطة Texas Instruments و THS6062CD بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | THS6052CDR | THS6062CD |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Interface ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | ADSL CPE and PLC line driver | — |
| Output Current | 175 mA | — |
| Supply Voltage Range | ±12 V | — |
| Noninverting Current Noise Density | 2.7 pA/√Hz | — |
| Number of Drivers | 2 | — |
| Supported Application | Full-rate ADSL and G.Lite | — |
| Transformer Ratio Compatibility | 1:1 | — |
| العلبة | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC, 3.90 mm width |
| نوع التركيب | Surface Mount | Surface mount |
| درجة حرارة التشغيل | 0 °C to +70 °C | — |
| Logic/Interface Type | Driver | — |
| عدد الدبابيس | 8 | 8 |
| Line-Driver Topology | High-current differential line-driver application | — |
| Downstream Noise Reduction | Reduces noise feedback through hybrid into downstream channel | — |
| Manufacturer Product Page | Texas Instruments THS6052 product page | — |
| Distributor Unit Price | $4.4981 per unit as of 2026-10-29 | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Pin Configuration | [DATA_NEEDED: complete pin configuration and pin names] | — |
| Receiver Configuration | — | Dual differential receiver |
| Gain-Bandwidth Product | — | 100 MHz |
| Input Voltage-Noise Density | — | 1.6 nV/√Hz |
| Slew Rate | — | 100 V/µs |
| Typical Output Drive Current | — | 90 mA |
| Minimum Stable Gain | — | 2 V/V |
| Inverted Stable Gain | — | -1 V/V |
| THD at 1 MHz | — | -72 dBc |
| THD at 1 MHz, Alternate Condition | — | -90 dBc |
| Single-Supply Operation | — | 5 V |
| Dual-Supply Operation | — | ±5 V |
| Typical Maximum Supply Configuration | — | ±15 V |
| Number of Channels | — | 2 |
| Amplifier Architecture | — | Voltage feedback |
| Target Application | — | ADSL data communication |