THS6052CDR vs THS6062CD So sánh

So sánh chi tiết song song của THS6052CDR bằng Texas Instruments và THS6062CD bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
THS6052CDR THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)

THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)

THS6052CDR ✓ Hoạt động
Texas Instruments
THS6062CD THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments

THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments

THS6062CD ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số THS6052CDR THS6062CD
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type ADSL CPE and PLC line driver —
Output Current 175 mA —
Supply Voltage Range ±12 V —
Noninverting Current Noise Density 2.7 pA/√Hz —
Number of Drivers 2 —
Supported Application Full-rate ADSL and G.Lite —
Transformer Ratio Compatibility 1:1 —
Hộp 8-SOIC (0.154 inch, 3.90 mm width) 8-pin SOIC, 3.90 mm width
Kiểu lắp đặt Surface Mount Surface mount
Nhiệt độ hoạt động 0 °C to +70 °C —
Logic/Interface Type Driver —
Số lượng chân 8 8
Line-Driver Topology High-current differential line-driver application —
Downstream Noise Reduction Reduces noise feedback through hybrid into downstream channel —
Manufacturer Product Page Texas Instruments THS6052 product page —
Distributor Unit Price $4.4981 per unit as of 2026-10-29 —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] [DATA_NEEDED: AEC-Q100 qualification status]
Pin Configuration [DATA_NEEDED: complete pin configuration and pin names] —
Receiver Configuration — Dual differential receiver
Gain-Bandwidth Product — 100 MHz
Input Voltage-Noise Density — 1.6 nV/√Hz
Slew Rate — 100 V/µs
Typical Output Drive Current — 90 mA
Minimum Stable Gain — 2 V/V
Inverted Stable Gain — -1 V/V
THD at 1 MHz — -72 dBc
THD at 1 MHz, Alternate Condition — -90 dBc
Single-Supply Operation — 5 V
Dual-Supply Operation — ±5 V
Typical Maximum Supply Configuration — ±15 V
Number of Channels — 2
Amplifier Architecture — Voltage feedback
Target Application — ADSL data communication

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá