THS6052CDR vs THS6062CD तुलना

विस्तृत दोनों ओर की तुलना THS6052CDR द्वारा Texas Instruments और THS6062CD द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
THS6052CDR THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)

THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)

THS6052CDR ✓ सक्रिय
Texas Instruments
THS6062CD THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments

THS6062CD - 100 MHz Low-Noise ADSL Receiver | Texas Instruments

THS6062CD ✓ सक्रिय

विशेषता तुलना

पैरामीटर THS6052CDR THS6062CD
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type ADSL CPE and PLC line driver —
Output Current 175 mA —
Supply Voltage Range ±12 V —
Noninverting Current Noise Density 2.7 pA/√Hz —
Number of Drivers 2 —
Supported Application Full-rate ADSL and G.Lite —
Transformer Ratio Compatibility 1:1 —
पैकेज 8-SOIC (0.154 inch, 3.90 mm width) 8-pin SOIC, 3.90 mm width
माउंटिंग प्रकार Surface Mount Surface mount
ऑपरेटिंग तापमान 0 °C to +70 °C —
Logic/Interface Type Driver —
पिन की संख्या 8 8
Line-Driver Topology High-current differential line-driver application —
Downstream Noise Reduction Reduces noise feedback through hybrid into downstream channel —
Manufacturer Product Page Texas Instruments THS6052 product page —
Distributor Unit Price $4.4981 per unit as of 2026-10-29 —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] [DATA_NEEDED: AEC-Q100 qualification status]
Pin Configuration [DATA_NEEDED: complete pin configuration and pin names] —
Receiver Configuration — Dual differential receiver
Gain-Bandwidth Product — 100 MHz
Input Voltage-Noise Density — 1.6 nV/√Hz
Slew Rate — 100 V/µs
Typical Output Drive Current — 90 mA
Minimum Stable Gain — 2 V/V
Inverted Stable Gain — -1 V/V
THD at 1 MHz — -72 dBc
THD at 1 MHz, Alternate Condition — -90 dBc
Single-Supply Operation — 5 V
Dual-Supply Operation — ±5 V
Typical Maximum Supply Configuration — ±15 V
Number of Channels — 2
Amplifier Architecture — Voltage feedback
Target Application — ADSL data communication

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध