THS6052CDR vs THS6062CD Comparaison
Comparaison détaillée côte à côte de THS6052CDR par Texas Instruments et THS6062CD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
THS6052CDR - 175mA ±12V ADSL CPE Line Driver | TI (Tape & Reel)
THS6052CDR ✓ ActifComparaison des spécifications
| Paramètre | THS6052CDR | THS6062CD |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | ADSL CPE and PLC line driver | — |
| Output Current | 175 mA | — |
| Supply Voltage Range | ±12 V | — |
| Noninverting Current Noise Density | 2.7 pA/√Hz | — |
| Number of Drivers | 2 | — |
| Supported Application | Full-rate ADSL and G.Lite | — |
| Transformer Ratio Compatibility | 1:1 | — |
| Boîtier | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC, 3.90 mm width |
| Type de montage | Surface Mount | Surface mount |
| Température de fonctionnement | 0 °C to +70 °C | — |
| Logic/Interface Type | Driver | — |
| Nombre de broches | 8 | 8 |
| Line-Driver Topology | High-current differential line-driver application | — |
| Downstream Noise Reduction | Reduces noise feedback through hybrid into downstream channel | — |
| Manufacturer Product Page | Texas Instruments THS6052 product page | — |
| Distributor Unit Price | $4.4981 per unit as of 2026-10-29 | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Pin Configuration | [DATA_NEEDED: complete pin configuration and pin names] | — |
| Receiver Configuration | — | Dual differential receiver |
| Gain-Bandwidth Product | — | 100 MHz |
| Input Voltage-Noise Density | — | 1.6 nV/√Hz |
| Slew Rate | — | 100 V/µs |
| Typical Output Drive Current | — | 90 mA |
| Minimum Stable Gain | — | 2 V/V |
| Inverted Stable Gain | — | -1 V/V |
| THD at 1 MHz | — | -72 dBc |
| THD at 1 MHz, Alternate Condition | — | -90 dBc |
| Single-Supply Operation | — | 5 V |
| Dual-Supply Operation | — | ±5 V |
| Typical Maximum Supply Configuration | — | ±15 V |
| Number of Channels | — | 2 |
| Amplifier Architecture | — | Voltage feedback |
| Target Application | — | ADSL data communication |