TLE6250GV33XUMA1 vs TLE8250GVIOXUMA5 Comparison

Detailed side-by-side comparison of TLE6250GV33XUMA1 by Infineon and TLE8250GVIOXUMA5 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ End of Life

Specification Comparison

Parameter TLE6250GV33XUMA1 TLE8250GVIOXUMA5
Brand Infineon Infineon
Category Interface ICs Interface ICs
Lifecycle Status End of Life Active
Product Type CAN bus transceiver —
CAN Transceiver Type 1/1 half-duplex transceiver —
Maximum CAN Data Rate 1 Mbit/s —
Supply Voltage Range 12 V to 24 V —
Logic I/O Voltage Range 3.3 V to 5 V —
Typical Operating Current 70 mA —
Supply Compatibility 12 V and 24 V automotive battery systems —
Operating Modes Normal mode and standby mode —
Standby Function Disables both receiver and transmitter —
Control Interface INH control pin —
Receive-Only Configuration RM pin left open when the receive-only feature is not used —
Normal-Mode Configuration INH pin connected to ground when standby mode is not used —
CAN Compatibility ISO 11898 —
EMC Capability Automotive CAN transceiver with EMC performance —
Package PG-DSO-8 —
Package Pin Count 8 pins —
Mounting Type Surface mount Surface Mount
Packaging Tape and reel —
Automotive Qualification AEC-Q100 —
RoHS Status RoHS compliant green product —
Lead-Free Finish Pb-free finish on leads —
Soldering Standard IPC/JEDEC J-STD-020 —
REACH Status unknown —
Operating Temperature Range [DATA_NEEDED: operating temperature range] —
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Bus Fault Protection [DATA_NEEDED: bus fault protection limits] —
ESD Protection [DATA_NEEDED: ESD protection ratings] Robust ESD protection on bus pins
Protocol — CANbus
Data Rate — 1 MBd
Number of Drivers/Receivers — 1/1
Duplex — Half
Supply Voltage — 4.5 V to 5.5 V
Receiver Hysteresis — 200 mV
Operating Temperature — -40C to +150C
Supplier Device Package — PG-DSO-8-16
Package / Case — 8-SOIC (0.154in, 3.90mm Width)
Physical Layer Standard — ISO 11898-2 (high-speed CAN)
I/O Voltage Input (VIO) — Yes, separate logic-level supply
EME/EMI — Low electromagnetic emission, high EMI immunity
ECCN — EAR99
HTSUS — 8542.39.0001
Moisture Sensitivity Level — 2A
Part Status — Active

Datasheets & Resources

Browse All Products Create BOM Request Quote