TLE6250GV33XUMA1 vs TLE8250GVIOXUMA5 So sánh

So sánh chi tiết song song của TLE6250GV33XUMA1 bằng Infineon và TLE8250GVIOXUMA5 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ Cuối đời
Infineon
TLE8250GVIOXUMA5 TLE8250GVIOXUMA5 - High-Speed CAN Transceiver 1MBd | Infineon

TLE8250GVIOXUMA5 - High-Speed CAN Transceiver 1MBd | Infineon

TLE8250GVIOXUMA5 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số TLE6250GV33XUMA1 TLE8250GVIOXUMA5
Thương hiệu Infineon Infineon
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Cuối chu kỳ cuộc sống Hoạt động
Product Type CAN bus transceiver —
CAN Transceiver Type 1/1 half-duplex transceiver —
Maximum CAN Data Rate 1 Mbit/s —
Supply Voltage Range 12 V to 24 V —
Logic I/O Voltage Range 3.3 V to 5 V —
Typical Operating Current 70 mA —
Supply Compatibility 12 V and 24 V automotive battery systems —
Operating Modes Normal mode and standby mode —
Standby Function Disables both receiver and transmitter —
Control Interface INH control pin —
Receive-Only Configuration RM pin left open when the receive-only feature is not used —
Normal-Mode Configuration INH pin connected to ground when standby mode is not used —
CAN Compatibility ISO 11898 —
EMC Capability Automotive CAN transceiver with EMC performance —
Hộp PG-DSO-8 —
Package Pin Count 8 pins —
Kiểu lắp đặt Surface mount Surface Mount
Packaging Tape and reel —
Automotive Qualification AEC-Q100 —
Trạng thái RoHS RoHS compliant green product —
Lead-Free Finish Pb-free finish on leads —
Soldering Standard IPC/JEDEC J-STD-020 —
REACH Status unknown —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Bus Fault Protection [DATA_NEEDED: bus fault protection limits] —
ESD Protection [DATA_NEEDED: ESD protection ratings] Robust ESD protection on bus pins
Protocol — CANbus
Tốc độ dữ liệu — 1 MBd
Number of Drivers/Receivers — 1/1
Duplex — Half
Điện áp cung cấp — 4.5 V to 5.5 V
Receiver Hysteresis — 200 mV
Nhiệt độ hoạt động — -40C to +150C
Supplier Device Package — PG-DSO-8-16
Hộp / Vỏ — 8-SOIC (0.154in, 3.90mm Width)
Physical Layer Standard — ISO 11898-2 (high-speed CAN)
I/O Voltage Input (VIO) — Yes, separate logic-level supply
EME/EMI — Low electromagnetic emission, high EMI immunity
ECCN — EAR99
HTSUS — 8542.39.0001
Moisture Sensitivity Level — 2A
Part Status — Active

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá