TLE6250GV33XUMA1 vs TLE8250GVIOXUMA5 तुलना

विस्तृत दोनों ओर की तुलना TLE6250GV33XUMA1 द्वारा Infineon और TLE8250GVIOXUMA5 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ जीवन की समाप्ति
Infineon
TLE8250GVIOXUMA5 TLE8250GVIOXUMA5 - High-Speed CAN Transceiver 1MBd | Infineon

TLE8250GVIOXUMA5 - High-Speed CAN Transceiver 1MBd | Infineon

TLE8250GVIOXUMA5 ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLE6250GV33XUMA1 TLE8250GVIOXUMA5
ब्रांड Infineon Infineon
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति उत्पादन बंद सक्रिय
Product Type CAN bus transceiver —
CAN Transceiver Type 1/1 half-duplex transceiver —
Maximum CAN Data Rate 1 Mbit/s —
Supply Voltage Range 12 V to 24 V —
Logic I/O Voltage Range 3.3 V to 5 V —
Typical Operating Current 70 mA —
Supply Compatibility 12 V and 24 V automotive battery systems —
Operating Modes Normal mode and standby mode —
Standby Function Disables both receiver and transmitter —
Control Interface INH control pin —
Receive-Only Configuration RM pin left open when the receive-only feature is not used —
Normal-Mode Configuration INH pin connected to ground when standby mode is not used —
CAN Compatibility ISO 11898 —
EMC Capability Automotive CAN transceiver with EMC performance —
पैकेज PG-DSO-8 —
Package Pin Count 8 pins —
माउंटिंग प्रकार Surface mount Surface Mount
Packaging Tape and reel —
Automotive Qualification AEC-Q100 —
RoHS स्थिति RoHS compliant green product —
Lead-Free Finish Pb-free finish on leads —
Soldering Standard IPC/JEDEC J-STD-020 —
REACH Status unknown —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Bus Fault Protection [DATA_NEEDED: bus fault protection limits] —
ESD Protection [DATA_NEEDED: ESD protection ratings] Robust ESD protection on bus pins
Protocol — CANbus
डेटा दर — 1 MBd
Number of Drivers/Receivers — 1/1
Duplex — Half
सप्लाई वोल्टेज — 4.5 V to 5.5 V
Receiver Hysteresis — 200 mV
ऑपरेटिंग तापमान — -40C to +150C
Supplier Device Package — PG-DSO-8-16
पैकेज / केस — 8-SOIC (0.154in, 3.90mm Width)
Physical Layer Standard — ISO 11898-2 (high-speed CAN)
I/O Voltage Input (VIO) — Yes, separate logic-level supply
EME/EMI — Low electromagnetic emission, high EMI immunity
ECCN — EAR99
HTSUS — 8542.39.0001
Moisture Sensitivity Level — 2A
Part Status — Active

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध