TLE6250GV33XUMA1 vs TLE8250GVIOXUMA5 Comparación
Comparación detallada lado a lado de TLE6250GV33XUMA1 por Infineon y TLE8250GVIOXUMA5 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | TLE6250GV33XUMA1 | TLE8250GVIOXUMA5 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Fin de vida | Activo |
| Product Type | CAN bus transceiver | — |
| CAN Transceiver Type | 1/1 half-duplex transceiver | — |
| Maximum CAN Data Rate | 1 Mbit/s | — |
| Supply Voltage Range | 12 V to 24 V | — |
| Logic I/O Voltage Range | 3.3 V to 5 V | — |
| Typical Operating Current | 70 mA | — |
| Supply Compatibility | 12 V and 24 V automotive battery systems | — |
| Operating Modes | Normal mode and standby mode | — |
| Standby Function | Disables both receiver and transmitter | — |
| Control Interface | INH control pin | — |
| Receive-Only Configuration | RM pin left open when the receive-only feature is not used | — |
| Normal-Mode Configuration | INH pin connected to ground when standby mode is not used | — |
| CAN Compatibility | ISO 11898 | — |
| EMC Capability | Automotive CAN transceiver with EMC performance | — |
| Encapsulado | PG-DSO-8 | — |
| Package Pin Count | 8 pins | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Automotive Qualification | AEC-Q100 | — |
| Estado RoHS | RoHS compliant green product | — |
| Lead-Free Finish | Pb-free finish on leads | — |
| Soldering Standard | IPC/JEDEC J-STD-020 | — |
| REACH Status | unknown | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Transmitter Propagation Delay | [DATA_NEEDED: transmitter propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Bus Fault Protection | [DATA_NEEDED: bus fault protection limits] | — |
| ESD Protection | [DATA_NEEDED: ESD protection ratings] | Robust ESD protection on bus pins |
| Protocol | — | CANbus |
| Velocidad de datos | — | 1 MBd |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tensión de alimentación | — | 4.5 V to 5.5 V |
| Receiver Hysteresis | — | 200 mV |
| Temperatura de funcionamiento | — | -40C to +150C |
| Supplier Device Package | — | PG-DSO-8-16 |
| Encapsulado / Carcasa | — | 8-SOIC (0.154in, 3.90mm Width) |
| Physical Layer Standard | — | ISO 11898-2 (high-speed CAN) |
| I/O Voltage Input (VIO) | — | Yes, separate logic-level supply |
| EME/EMI | — | Low electromagnetic emission, high EMI immunity |
| ECCN | — | EAR99 |
| HTSUS | — | 8542.39.0001 |
| Moisture Sensitivity Level | — | 2A |
| Part Status | — | Active |