TLE6250GV33XUMA1 vs TLE8250GVIOXUMA5 Comparaison

Comparaison détaillée côte à côte de TLE6250GV33XUMA1 par Infineon et TLE8250GVIOXUMA5 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ Fin de vie

Comparaison des spécifications

Paramètre TLE6250GV33XUMA1 TLE8250GVIOXUMA5
Marque Infineon Infineon
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Fin de vie Actif
Product Type CAN bus transceiver —
CAN Transceiver Type 1/1 half-duplex transceiver —
Maximum CAN Data Rate 1 Mbit/s —
Supply Voltage Range 12 V to 24 V —
Logic I/O Voltage Range 3.3 V to 5 V —
Typical Operating Current 70 mA —
Supply Compatibility 12 V and 24 V automotive battery systems —
Operating Modes Normal mode and standby mode —
Standby Function Disables both receiver and transmitter —
Control Interface INH control pin —
Receive-Only Configuration RM pin left open when the receive-only feature is not used —
Normal-Mode Configuration INH pin connected to ground when standby mode is not used —
CAN Compatibility ISO 11898 —
EMC Capability Automotive CAN transceiver with EMC performance —
Boîtier PG-DSO-8 —
Package Pin Count 8 pins —
Type de montage Surface mount Surface Mount
Packaging Tape and reel —
Automotive Qualification AEC-Q100 —
Statut RoHS RoHS compliant green product —
Lead-Free Finish Pb-free finish on leads —
Soldering Standard IPC/JEDEC J-STD-020 —
REACH Status unknown —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Transmitter Propagation Delay [DATA_NEEDED: transmitter propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Bus Fault Protection [DATA_NEEDED: bus fault protection limits] —
ESD Protection [DATA_NEEDED: ESD protection ratings] Robust ESD protection on bus pins
Protocol — CANbus
Débit de données — 1 MBd
Number of Drivers/Receivers — 1/1
Duplex — Half
Tension d'alimentation — 4.5 V to 5.5 V
Receiver Hysteresis — 200 mV
Température de fonctionnement — -40C to +150C
Supplier Device Package — PG-DSO-8-16
Boîtier / Format — 8-SOIC (0.154in, 3.90mm Width)
Physical Layer Standard — ISO 11898-2 (high-speed CAN)
I/O Voltage Input (VIO) — Yes, separate logic-level supply
EME/EMI — Low electromagnetic emission, high EMI immunity
ECCN — EAR99
HTSUS — 8542.39.0001
Moisture Sensitivity Level — 2A
Part Status — Active

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis