TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Comparison
Detailed side-by-side comparison of TLE94104EPXUMA1 by Infineon and BTS70402EPGXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
TLE94104EPXUMA1
TLE94104EPXUMA1 - Quad Half-Bridge DC Motor Driver | Infineon
TLE94104EPXUMA1 β ActiveInfineon
BTS70402EPGXUMA1
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 β ActiveSpecification Comparison
| Parameter | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Motor Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.70 | $3.18 |
| Product Type | Half-Bridge (4) Driver for DC Motors | β |
| Topology | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | β |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | β |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | β |
| Output Configuration | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| Interface | 16-bit SPI, daisy-chain capable | β |
| Operating Junction Temperature | -40 C to +150 C | β |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Package | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 2A | β |
| RoHS Status | Compliant | β |
| Number of Outputs | 4 half-bridge channels | β |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | β |
| Slew Rate Control | Configurable via SPI | β |
| Manufacturer | β | Infineon Technologies |
| Part Family | β | PROFET+2 (BTS70xxx series) |
| Function | β | Smart High-Side Power Switch |
| Number of Channels | β | 4 |
| Continuous Load Current per Channel | β | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | β | 65 mOhm typical |
| Operating Voltage Range | β | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | β | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | β | SPI status register, current-sense feedback |
| Operating Temperature Range | β | -40 Β°C to +150 Β°C junction |
| AEC-Q100 Qualification | β | Qualified (automotive grade) |
| RoHS Compliance | β | Compliant |