TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Comparação
Comparação detalhada lado a lado de TLE94104EPXUMA1 por Infineon e BTS70402EPGXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Motor Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,70 | $3,18 |
| Product Type | Half-Bridge (4) Driver for DC Motors | — |
| Topologia | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | — |
| Configuração de saída | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| Interface | 16-bit SPI, daisy-chain capable | — |
| Temperatura de junção de operação | -40 C to +150 C | — |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Encapsulamento | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Nível MSL | 2A | — |
| Status RoHS | Compliant | — |
| Número de saídas | 4 half-bridge channels | — |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | — |
| Slew Rate Control | Configurable via SPI | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Função | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Faixa de temperatura de operação | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |