TLE94104EPXUMA1 vs BTS70402EPGXUMA1 比較
詳細な並列比較: TLE94104EPXUMA1 メーカー: Infineon および BTS70402EPGXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Motor Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.70 | $3.18 |
| Product Type | Half-Bridge (4) Driver for DC Motors | — |
| トポロジー | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | — |
| 出力構成 | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| インターフェース | 16-bit SPI, daisy-chain capable | — |
| 動作接合温度 | -40 C to +150 C | — |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| パッケージ | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| 実装タイプ | Surface Mount | Surface Mount |
| MSLレベル | 2A | — |
| RoHS ステータス | Compliant | — |
| 出力数 | 4 half-bridge channels | — |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | — |
| Slew Rate Control | Configurable via SPI | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| 機能 | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| 動作温度範囲 | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |