TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE94104EPXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,70 | $3,18 |
| Product Type | Half-Bridge (4) Driver for DC Motors | — |
| Topologie | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | — |
| Configuration de sortie | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| Interface | 16-bit SPI, daisy-chain capable | — |
| Température de jonction en fonctionnement | -40 C to +150 C | — |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Boîtier | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2A | — |
| Statut RoHS | Compliant | — |
| Nombre de sorties | 4 half-bridge channels | — |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | — |
| Slew Rate Control | Configurable via SPI | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |