TLE94104EPXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von TLE94104EPXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | TLE94104EPXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,70 | $3,18 |
| Product Type | Half-Bridge (4) Driver for DC Motors | — |
| Topologie | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Motor Supply Voltage (VS) | 5.5 V to 20 V | — |
| Ausgangskonfiguration | Half-Bridge (4) - parallelable to 2x H-Bridge | High-side, N-channel MOSFET |
| Schnittstelle | 16-bit SPI, daisy-chain capable | — |
| Betriebs-Sperrschichttemperatur | -40 C to +150 C | — |
| Protection Features | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Gehäuse | PG-TSDSO-14 (14-pin with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2A | — |
| RoHS-Status | Compliant | — |
| Anzahl der Ausgänge | 4 half-bridge channels | — |
| Automotive Qualification | AEC-Q100 grade-0 capable (Tj = 150 C) | — |
| Slew Rate Control | Configurable via SPI | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Betriebstemperaturbereich | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |