New Products · Beschaffungs-Kurzbericht

Geekworm UPS Scap 5V5A Superkondensator-HAT ermöglicht sauberes Herunterfahren für Raspberry-Pi-5-Designs

Geekworm und Mcuzone liefern ein 5V/5A-Superkondensator-UPS-HAT für den Raspberry Pi 5 in den Varianten 22F/60F/100F, mit Pogo-Pin-Erkennung und I2C-Telemetrie.

Veröffentlicht Aktualisiert 4 Min. Lesezeit ✓ KI-bereit Teilen

TL;DR – drei Sätze

  • Geekworm and Mcuzone launched the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5. (S1)
  • Available supercapacitor variants are 22F, 60F and 100F, sized for "a few seconds to a few minutes" of backup. (S1)
  • Integrated PD chip negotiates a true 5V/5A output to avoid Pi 5 low-voltage warnings. (S1)

Entnommen aus key_takeaways (echtes Feld, max. 3 Einträge). Fakt und Analyse werden getrennt gekennzeichnet.

Geekworm UPS Scap 5V5A Superkondensator-HAT ermöglicht sauberes Herunterfahren für Raspberry-Pi-5-Designs — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "Geekworm UPS Scap 5V5A Superkondensator-HAT ermöglicht sauberes Herunterfahren fü…". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFGeekworm UPS Scap 5V5ASuperkondensator-HAT ermöglicht sauberesHerunterfahren fü…XAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Sie kommen von einer KI-Antwort – dies ist das verifizierbare Original

Eine KI-Zusammenfassung hat möglicherweise die Grundlage für ihre Aussagen ausgelassen. Die ursprüngliche Prognose, die betroffenen Bauteile und jede Quellenangabe befinden sich auf dieser Seite, jeweils bis zur Quelle zurückverfolgbar.

XAIPART-Prognose

Dieser Kurzbericht enthält eine falsifizierbare Prognose.

Betroffene Bauteile

Keine Übereinstimmung im Katalog für diese Geschichte – es wird nichts angezeigt, statt eine Übereinstimmung zu unterstellen.

Reported by CNX-Software on . Summarized and analyzed by XAIPART Editorial.

What happened

Geekworm, working with Mcuzone, has launched the UPS Scap 5V5A, a supercapacitor-based uninterruptible power supply HAT designed for the Raspberry Pi 5.S1 The board is intended to keep the Raspberry Pi running "long enough (a few seconds to a few minutes) to save data and shut down safely," rather than to provide hours of backup power.S1

The HAT is offered in three supercapacitor variants rated 100F, 60F, and 22F.S1 It integrates a Power Delivery chip to negotiate a true 5V/5A output, which is described as sufficient to run the Raspberry Pi 5 "without triggering the low-voltage warnings that can happen with some power supplies."S1 Power-loss detection is handled through pogo pins on the Raspberry Pi 5, and an I2C interface exposes voltage and current readings in real time.S1

The module accepts two independent power inputs: a wide-voltage DC barrel jack and a standard USB-C PD charger.S1 The combination of pogo-pin loss detection, I2C telemetry and dual inputs lets the host software decide whether to initiate an orderly shutdown or continue running, depending on the supercap variant installed.

Key numbers
MetricReported valueSource
Output rail negotiated5V / 5A[S1]
Supercapacitor options22F / 60F / 100F[S1]
Backup runtime targetA few seconds to a few minutes[S1]
Power inputsDC barrel jack (wide voltage) and USB-C PD[S1]
Host interface for telemetryI2C (voltage, current)[S1]
Power-loss detection pathPogo pins to Raspberry Pi 5[S1]
Street price / availabilityNot disclosed[S1]

Background timeline

  1. - Geekworm and Mcuzone publicly introduce the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5 in 22F, 60F, and 100F versions, with 5V/5A PD output, pogo-pin loss detection and I2C telemetry.[S1]
  2. No prior milestones disclosed by the source.

XAIPART take

Technical impact

The 5V/5A PD negotiation is the meaningful change here: prior Raspberry Pi 5 HAT designs often relied on 5V/3A or 5V/4A sources and tripped the bootloader low-voltage warning under CPU load.S1 A HAT that pulls 5A cleanly is closer to a "drop-in" power source for Pi 5 industrial builds, especially when paired with a USB-C PD brick on the second input.

Pogo-pin sensing plus an I2C telemetry channel is a deliberate design choice for fleet deployment: a daemon on the Pi can read voltage and current continuously and trigger an orderly shutdown before the supercaps collapse.XAIPART analysis

Market impact

Three capacitance tiers (22F/60F/100F) let buyers tune cost-per-node against acceptable shutdown window, which is more granular than typical single-value UPS HATs in this segment.S1 For small-batch industrial or kiosk integrators, that tiering can simplify BOMs across product lines that previously needed different UPS boards per site.XAIPART analysis

Supercapacitor-based UPS parts generally ship with shorter lead times than Li-ion battery UPS HATs, which have faced periodic shipping constraints on hobbyist channels; sourcing teams should still verify any RoHS/UN38.3 documentation is provided even though no cells are present.XAIPART analysis

Action

Engineering teams prototyping Pi 5 gateways or HMIs should shortlist the 60F or 100F variants for any deployment where an unclean shutdown corrupts state (databases, MQTT buffers, SD-card journaling).XAIPART analysis

Procurement should request Geekworm's I2C register map and any reference shutdown daemon before issuing a POs, and confirm whether the dual-input feature supports hot-swap between the DC barrel jack and the USB-C PD source for redundant-power topologies.XAIPART analysis

XAIPART Forecast

XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price under 5 USD per 10F of rated capacitance; if no tier is listed in stock at two distributors by 2027-06-30, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Pricing, distributor stock and certifications (CE/FCC/UN38.3) were not disclosed in the source and remain unverified.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Alternativen und Lebenszyklus

Hinterlegte Alternativen – Katalogumfang, kein Marktranking
BauteilBeziehungLebenszyklusGrundlage
— Keine Alternative hinterlegt DATEN FEHLEN — Erfordert match_type bevor eine Vorgänger-Kennzeichnung erscheinen darf

Die Kennzeichnungen „Vorgänger“ und „Alternative“ stammen ausschließlich aus einem erfassten Übereinstimmungstyp, einem Lebenszyklusstatus oder dem Quelltext. Wo keine Übereinstimmung erfasst ist, wird keine Kennzeichnung angezeigt. Unsere eigenen Angebote sind keine Marktreferenz.

Worauf Sie achten sollten

Falsifizierbare Prognose – Schwellenwert, Zeitfenster und aktueller Status. Widerlegte Prognosen bleiben sichtbar.
BehauptungSchwellenwertVonStatus
XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price un... no tier is listed in stock at two distributors by 2027-06-30 Pending

Prognosen, die sich als falsch erweisen, bleiben sichtbar und werden gekennzeichnet. Wir löschen sie nicht.

Betroffene Bauteile

Keine Übereinstimmung im Katalog. Diese Geschichte lässt sich keinem derzeit auf XAIPART gelisteten Bauteil zuordnen. Wir unterstellen keine Übereinstimmungen und zeigen keine Platzhalterliste.

Wo dies in der Geschichte steht

Event chain · as of 2026-10-18T04:00:34+08:00 · nodes link to published articles on this site.
Event chain — raspberry-pi+new-productsChain nodes: 2026-10-11 Nuvoton erweiterte die NuMicro MA35D0-Serie um drei LQFP128-Varianten und brachte das Board NuMaker-IoT-MA35D0-A2 auf den Markt, das duale Cortex-A35 mit einem Cortex-M4 für Echtzeit-I/O kombiniert.; 2026-10-11 DEBIX hat einen industrietauglichen SBC auf Basis des MediaTek Genio 720 (MT8391) SoC mit einer 9-TOPS-NPU, Dual-Display-Schnittstellen und einem Bereich von -40 °C bis 85 °C auf den Markt gebracht.; 2026-10-11 Geekworm und Mcuzone liefern ein 5V/5A-Superkondensator-UPS-HAT für den Raspberry Pi 5 in den Varianten 22F/60F/100F, mit Pogo-Pin-Erkennung und I2C-Telemetrie.; 2026-10-11 Die Open-Source-Firmware DSPi ermöglicht es Raspberry Pi Pico und Pico 2, als USB-Soundkarte mit parametrischem EQ, Frequenzweichen und bis zu 8 Ausgangskanälen zu fungieren.; 2026-10-11 Walnut Pi hat ein Compute Module im CM5-Formfaktor auf Basis des Allwinner T527 Octa-Core Cortex-A55 vorgestellt, mit bis zu 4 GB LPDDR4, 16 GB eMMC, WiFi 6 und einer 2-TOPS-NPU.; 2026-10-18 Zwei 50x26 mm Boards – eines mit CPU, eines mit FPGA – treiben 1920x1080- oder 1366x768-Panels über LVDS, eDP, DVI oder VGA für Bare-Metal Embedded UIs an.. As of 2026-10-18T04:00:34+08:00. Open forecast: Nuvoton erweiterte die NuMicro MA35D0-Serie um drei LQFP128-Varianten un — pending Open forecast: DEBIX hat einen industrietauglichen SBC auf Basis des MediaTek Genio 720 — pending.2026-10-11Nuvoton erweiterteour brief ↗2026-10-11DEBIX hat einen inour brief ↗2026-10-11Geekworm und Mcuzoour brief ↗this brief2026-10-11Die Open-Source-Fiour brief ↗2026-10-11Walnut Pi hat ein our brief ↗2026-10-18Zwei 50x26 mm Boarour brief ↗Open forecast: Nuvoton erweiterte die NuMicro MA35D0-Serie um drei LQFP128-Varianten un — pendingOpen forecast: DEBIX hat einen industrietauglichen SBC auf Basis des MediaTek Genio 720 — pending
  1. nuvoton-adds-three-ma35d0-lqfp128-mpus-and-compact-45-45-mm-chili-pro-eval-board-for-industrial-ai2026-10-11
  2. debix-m8391-01-sbc-brings-mediatek-genio-720-9-tops-npu-to-industrial-edge-builds2026-10-11
  3. geekworm-ups-scap-5v5a-supercapacitor-hat-adds-graceful-shutdown-to-raspberry-pi-5-designs2026-10-11
  4. dspi-firmware-turns-rp2040-rp2350-boards-into-usb-sound-cards-with-onboard-dsp2026-10-11
  5. walnut-pi-cm2-targets-raspberry-pi-cm5-sockets-at-lower-cost-with-allwinner-t5272026-10-11
  6. cuprumflow-graphics-adds-hd-ui-to-mcu-projects-without-an-os2026-10-18
  1. Nuvoton erweiterte die NuMicro MA35D0-Serie um drei LQFP128-Varianten und brachte das Board NuMaker-IoT-MA35D0-A2 auf den Markt, das duale Cortex-A35 mit einem Cortex-M4 für Echtzeit-I/O kombiniert.
  2. DEBIX hat einen industrietauglichen SBC auf Basis des MediaTek Genio 720 (MT8391) SoC mit einer 9-TOPS-NPU, Dual-Display-Schnittstellen und einem Bereich von -40 °C bis 85 °C auf den Markt gebracht.
  3. Geekworm und Mcuzone liefern ein 5V/5A-Superkondensator-UPS-HAT für den Raspberry Pi 5 in den Varianten 22F/60F/100F, mit Pogo-Pin-Erkennung und I2C-Telemetrie.
  4. Die Open-Source-Firmware DSPi ermöglicht es Raspberry Pi Pico und Pico 2, als USB-Soundkarte mit parametrischem EQ, Frequenzweichen und bis zu 8 Ausgangskanälen zu fungieren.
  5. Walnut Pi hat ein Compute Module im CM5-Formfaktor auf Basis des Allwinner T527 Octa-Core Cortex-A55 vorgestellt, mit bis zu 4 GB LPDDR4, 16 GB eMMC, WiFi 6 und einer 2-TOPS-NPU.
  6. Zwei 50x26 mm Boards – eines mit CPU, eines mit FPGA – treiben 1920x1080- oder 1366x768-Panels über LVDS, eDP, DVI oder VGA für Bare-Metal Embedded UIs an. aggregator

Die Kette wird nur aus veröffentlichten Kurzberichten aufgebaut – ein Knoten ohne Kurzbericht wird nicht gezeichnet.

Kostendruck nach Dimension

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

So wurde dies erstellt

Prozessnachweise – Abruf, Quellenprüfung, Modell und Gate
Audit-Trail für diesen Kurzbericht
Source fetched CNX-Software · www.cnx-software.com · 2,016 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,562 tokens · 54.7s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.047813 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Jede obige Zeile wird von der Pipeline erzeugt und nicht von Hand geschrieben.

Redaktionelle Bewertung

Deterministisches Gate-Ergebnis – reines PHP, kein Modell an der Entscheidung beteiligt
Aufschlüsselung der Gate-Bewertung 6 anwendbare Prüfungen, 6bestanden: 100 %. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155. Anwendbare Prüfungen bestanden 6 / 6 = 100% · Urteil: hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155 Das Gate entscheidet über die Veröffentlichung. Die Bewertung des unabhängigen Audits ist ausschließlich beratend.
Fehler gefunden? Sagen Sie uns, was falsch ist – Korrekturen werden zusammen mit dem Originaltext veröffentlicht und protokolliert. Wir bearbeiten Artikel nicht stillschweigend.

Kommentare

Seien Sie der Erste, der kommentiert.

Quellen

  1. Geekworm UPS Scap 5V5A – A supercapacitor UPS HAT for Raspberry Pi 5 — https://www.cnx-software.com/2026/10/05/geekworm-ups-scap-5v5a-a-supercapacitor-ups-hat-for-raspberry-pi-5/ · rss · abgerufen am

Fakten sind mit S1/S2 gekennzeichnet und lassen sich bis zur verlinkten Quelle zurückverfolgen. Passagen, die als Analyse sind die eigene Argumentation von XAIPART, getrennt von berichteten Fakten gehalten. Quellenlinks werden verfolgt und nicht nofollow – die Quellenangabe ist beabsichtigt.