New Products · Brève d'approvisionnement

Le HAT supercondensateur UPS Scap 5V5A de Geekworm ajoute un arrêt propre aux conceptions Raspberry Pi 5

Geekworm et Mcuzone livrent un HAT UPS à supercondensateur 5 V/5 A pour le Raspberry Pi 5 en variantes 22F/60F/100F, avec détection par pogo-pin et télémétrie I2C.

Publié Mis à jour 4 min de lecture ✓ Compatible IA Partager

TL;DR — trois phrases

  • Geekworm and Mcuzone launched the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5. (S1)
  • Available supercapacitor variants are 22F, 60F and 100F, sized for "a few seconds to a few minutes" of backup. (S1)
  • Integrated PD chip negotiates a true 5V/5A output to avoid Pi 5 low-voltage warnings. (S1)

Tiré de key_takeaways (champ réel, 3 entrées max.). Faits et analyse sont étiquetés séparément.

Le HAT supercondensateur UPS Scap 5V5A de Geekworm ajoute un arrêt propre aux conceptions Raspberry Pi 5 — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "Le HAT supercondensateur UPS Scap 5V5A de Geekworm ajoute un arrêt propre aux conceptions Raspberry Pi 5". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFLe HAT supercondensateur UPS Scap 5V5Ade Geekworm ajoute un arrêt propre auxconceptions Raspberry Pi 5XAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Vous arrivez depuis une réponse d'IA — voici l'original vérifiable

Un résumé généré par IA peut avoir omis le fondement de ses affirmations. La prévision d'origine, les références concernées et chaque citation figurent sur cette page, chacune traçable à sa source.

Prévision XAIPART

Cette brève comporte une prévision falsifiable.

Références concernées

Aucune correspondance dans le catalogue pour cette information — rien n'est affiché plutôt que de déduire une correspondance.

Reported by CNX-Software on . Summarized and analyzed by XAIPART Editorial.

What happened

Geekworm, working with Mcuzone, has launched the UPS Scap 5V5A, a supercapacitor-based uninterruptible power supply HAT designed for the Raspberry Pi 5.S1 The board is intended to keep the Raspberry Pi running "long enough (a few seconds to a few minutes) to save data and shut down safely," rather than to provide hours of backup power.S1

The HAT is offered in three supercapacitor variants rated 100F, 60F, and 22F.S1 It integrates a Power Delivery chip to negotiate a true 5V/5A output, which is described as sufficient to run the Raspberry Pi 5 "without triggering the low-voltage warnings that can happen with some power supplies."S1 Power-loss detection is handled through pogo pins on the Raspberry Pi 5, and an I2C interface exposes voltage and current readings in real time.S1

The module accepts two independent power inputs: a wide-voltage DC barrel jack and a standard USB-C PD charger.S1 The combination of pogo-pin loss detection, I2C telemetry and dual inputs lets the host software decide whether to initiate an orderly shutdown or continue running, depending on the supercap variant installed.

Key numbers
MetricReported valueSource
Output rail negotiated5V / 5A[S1]
Supercapacitor options22F / 60F / 100F[S1]
Backup runtime targetA few seconds to a few minutes[S1]
Power inputsDC barrel jack (wide voltage) and USB-C PD[S1]
Host interface for telemetryI2C (voltage, current)[S1]
Power-loss detection pathPogo pins to Raspberry Pi 5[S1]
Street price / availabilityNot disclosed[S1]

Background timeline

  1. - Geekworm and Mcuzone publicly introduce the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5 in 22F, 60F, and 100F versions, with 5V/5A PD output, pogo-pin loss detection and I2C telemetry.[S1]
  2. No prior milestones disclosed by the source.

XAIPART take

Technical impact

The 5V/5A PD negotiation is the meaningful change here: prior Raspberry Pi 5 HAT designs often relied on 5V/3A or 5V/4A sources and tripped the bootloader low-voltage warning under CPU load.S1 A HAT that pulls 5A cleanly is closer to a "drop-in" power source for Pi 5 industrial builds, especially when paired with a USB-C PD brick on the second input.

Pogo-pin sensing plus an I2C telemetry channel is a deliberate design choice for fleet deployment: a daemon on the Pi can read voltage and current continuously and trigger an orderly shutdown before the supercaps collapse.XAIPART analysis

Market impact

Three capacitance tiers (22F/60F/100F) let buyers tune cost-per-node against acceptable shutdown window, which is more granular than typical single-value UPS HATs in this segment.S1 For small-batch industrial or kiosk integrators, that tiering can simplify BOMs across product lines that previously needed different UPS boards per site.XAIPART analysis

Supercapacitor-based UPS parts generally ship with shorter lead times than Li-ion battery UPS HATs, which have faced periodic shipping constraints on hobbyist channels; sourcing teams should still verify any RoHS/UN38.3 documentation is provided even though no cells are present.XAIPART analysis

Action

Engineering teams prototyping Pi 5 gateways or HMIs should shortlist the 60F or 100F variants for any deployment where an unclean shutdown corrupts state (databases, MQTT buffers, SD-card journaling).XAIPART analysis

Procurement should request Geekworm's I2C register map and any reference shutdown daemon before issuing a POs, and confirm whether the dual-input feature supports hot-swap between the DC barrel jack and the USB-C PD source for redundant-power topologies.XAIPART analysis

XAIPART Forecast

XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price under 5 USD per 10F of rated capacitance; if no tier is listed in stock at two distributors by 2027-06-30, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Pricing, distributor stock and certifications (CE/FCC/UN38.3) were not disclosed in the source and remain unverified.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Alternatives et cycle de vie

Alternatives référencées — périmètre du catalogue, pas un classement de marché
RéférenceRelationCycle de vieFondement
— Aucune alternative référencée DONNÉES REQUISES — Nécessite match_type avant que toute mention de prédécesseur ne puisse apparaître

Les mentions « prédécesseur » et « alternative » proviennent uniquement d'un type de correspondance enregistré, d'un statut de cycle de vie ou du texte source. Lorsqu'aucune correspondance n'est enregistrée, aucune mention n'est affichée. Nos propres annonces ne constituent pas une référence de marché.

À surveiller

Prévision falsifiable — seuil, période et statut actuel. Les prévisions réfutées restent visibles.
AffirmationSeuilParStatut
XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price un... no tier is listed in stock at two distributors by 2027-06-30 Pending

Les prévisions qui se révèlent erronées restent visibles et signalées. Nous ne les supprimons pas.

Références concernées

Aucune correspondance dans le catalogue. Cette information ne correspond à aucune référence actuellement listée sur XAIPART. Nous ne déduisons pas de correspondances et n'affichons pas de liste fictive.

Place de cet élément dans l'histoire

Event chain · as of 2026-10-18T04:00:34+08:00 · nodes link to published articles on this site.
Event chain — raspberry-pi+new-productsChain nodes: 2026-10-11 Nuvoton a élargi la série NuMicro MA35D0 avec trois pièces LQFP128 et lancé la carte NuMaker-IoT-MA35D0-A2, associant un double Cortex-A35 à un Cortex-M4 pour les E/S temps réel.; 2026-10-11 DEBIX a lancé un SBC de qualité industrielle alimenté par le SoC MediaTek Genio 720 (MT8391) avec un NPU de 9 TOPS, des interfaces double affichage et une plage de -40 °C à 85 °C.; 2026-10-11 Geekworm et Mcuzone livrent un HAT UPS à supercondensateur 5 V/5 A pour le Raspberry Pi 5 en variantes 22F/60F/100F, avec détection par pogo-pin et télémétrie I2C.; 2026-10-11 Le firmware open source DSPi permet aux Raspberry Pi Pico et Pico 2 de fonctionner comme carte son USB avec égaliseur paramétrique, filtres de répartition et jusqu'à 8 canaux de sortie.; 2026-10-11 Walnut Pi a lancé un Compute Module au format CM5 basé sur l'Allwinner T527 octa-core Cortex-A55, avec jusqu'à 4 Go de LPDDR4, 16 Go d'eMMC, WiFi 6 et un NPU de 2 TOPS.; 2026-10-18 Deux cartes de 50x26 mm - une CPU, une FPGA - pilotent des panneaux 1920x1080 ou 1366x768 via LVDS, eDP, DVI ou VGA pour des interfaces embarquées bare-metal.. As of 2026-10-18T04:00:34+08:00. Open forecast: Nuvoton a élargi la série NuMicro MA35D0 avec trois pièces LQFP128 et la — pending Open forecast: DEBIX a lancé un SBC de qualité industrielle alimenté par le SoC MediaTe — pending.2026-10-11Nuvoton a élargi lour brief ↗2026-10-11DEBIX a lancé un Sour brief ↗2026-10-11Geekworm et Mcuzonour brief ↗this brief2026-10-11Le firmware open sour brief ↗2026-10-11Walnut Pi a lancé our brief ↗2026-10-18Deux cartes de 50xour brief ↗Open forecast: Nuvoton a élargi la série NuMicro MA35D0 avec trois pièces LQFP128 et la — pendingOpen forecast: DEBIX a lancé un SBC de qualité industrielle alimenté par le SoC MediaTe — pending
  1. nuvoton-adds-three-ma35d0-lqfp128-mpus-and-compact-45-45-mm-chili-pro-eval-board-for-industrial-ai2026-10-11
  2. debix-m8391-01-sbc-brings-mediatek-genio-720-9-tops-npu-to-industrial-edge-builds2026-10-11
  3. geekworm-ups-scap-5v5a-supercapacitor-hat-adds-graceful-shutdown-to-raspberry-pi-5-designs2026-10-11
  4. dspi-firmware-turns-rp2040-rp2350-boards-into-usb-sound-cards-with-onboard-dsp2026-10-11
  5. walnut-pi-cm2-targets-raspberry-pi-cm5-sockets-at-lower-cost-with-allwinner-t5272026-10-11
  6. cuprumflow-graphics-adds-hd-ui-to-mcu-projects-without-an-os2026-10-18
  1. Nuvoton a élargi la série NuMicro MA35D0 avec trois pièces LQFP128 et lancé la carte NuMaker-IoT-MA35D0-A2, associant un double Cortex-A35 à un Cortex-M4 pour les E/S temps réel.
  2. DEBIX a lancé un SBC de qualité industrielle alimenté par le SoC MediaTek Genio 720 (MT8391) avec un NPU de 9 TOPS, des interfaces double affichage et une plage de -40 °C à 85 °C.
  3. Geekworm et Mcuzone livrent un HAT UPS à supercondensateur 5 V/5 A pour le Raspberry Pi 5 en variantes 22F/60F/100F, avec détection par pogo-pin et télémétrie I2C.
  4. Le firmware open source DSPi permet aux Raspberry Pi Pico et Pico 2 de fonctionner comme carte son USB avec égaliseur paramétrique, filtres de répartition et jusqu'à 8 canaux de sortie.
  5. Walnut Pi a lancé un Compute Module au format CM5 basé sur l'Allwinner T527 octa-core Cortex-A55, avec jusqu'à 4 Go de LPDDR4, 16 Go d'eMMC, WiFi 6 et un NPU de 2 TOPS.
  6. Deux cartes de 50x26 mm - une CPU, une FPGA - pilotent des panneaux 1920x1080 ou 1366x768 via LVDS, eDP, DVI ou VGA pour des interfaces embarquées bare-metal. aggregator

La chaîne est construite uniquement à partir de brèves publiées — un nœud sans brève n'est pas dessiné.

Pression sur les coûts par dimension

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Comment ce contenu a été produit

Traçabilité du processus — récupération, contrôle de la source, modèle et contrôle
Piste d'audit de cette brève
Source fetched CNX-Software · www.cnx-software.com · 2,016 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,562 tokens · 54.7s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.047813 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Chaque ligne ci-dessus est produite par le pipeline, et non rédigée à la main.

Score éditorial

Résultat du contrôle déterministe — PHP pur, aucun modèle impliqué dans le verdict
Détail du score de contrôle 6 contrôles applicables, 6réussies : 100 %. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155. Contrôles applicables réussis 6 / 6 = 100% · verdict : hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155 Le contrôle décide de la publication. Le score d'audit indépendant est purement consultatif.
Vous avez trouvé une erreur ? Signalez-nous le problème — les corrections sont publiées avec le texte d'origine et consignées. Nous ne modifions jamais silencieusement un article.

Commentaires

Soyez le premier à commenter.

Sources

  1. Geekworm UPS Scap 5V5A – A supercapacitor UPS HAT for Raspberry Pi 5 — https://www.cnx-software.com/2026/10/05/geekworm-ups-scap-5v5a-a-supercapacitor-ups-hat-for-raspberry-pi-5/ · rss · consulté le

Les faits sont marqués S1/S2 et renvoient à la source liée. Les passages étiquetés analyse relèvent du raisonnement propre à XAIPART, tenu séparé des faits rapportés. Les liens sources sont consultés plutôt que nofollow — l'attribution est intentionnelle.