New Products · Breve de abastecimiento

El HAT de supercondensador UPS Scap 5V5A de Geekworm añade apagado controlado a los diseños de Raspberry Pi 5

Geekworm y Mcuzone comercializan un HAT UPS de supercondensador de 5 V/5 A para la Raspberry Pi 5 en variantes de 22 F/60 F/100 F, con detección por pogo-pin y telemetría I2C.

Publicado Actualizado 4 min de lectura ✓ Listo para IA Compartir

TL;DR — tres frases

  • Geekworm and Mcuzone launched the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5. (S1)
  • Available supercapacitor variants are 22F, 60F and 100F, sized for "a few seconds to a few minutes" of backup. (S1)
  • Integrated PD chip negotiates a true 5V/5A output to avoid Pi 5 low-voltage warnings. (S1)

Tomado de key_takeaways (campo real, máx. 3 entradas). Los hechos y el análisis se etiquetan por separado.

El HAT de supercondensador UPS Scap 5V5A de Geekworm añade apagado controlado a los diseños de Raspberry Pi 5 — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "El HAT de supercondensador UPS Scap 5V5A de Geekworm añade apagado controlado a los diseños de Raspberry Pi 5". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFEl HAT de supercondensador UPS Scap 5V5Ade Geekworm añade apagado controlado alos diseños de Raspberry Pi 5XAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Llegó desde una respuesta de IA — este es el original verificable

Es posible que un resumen de IA haya omitido la base de sus afirmaciones. La previsión original, las piezas afectadas y cada cita están en esta página, cada una trazable hasta su fuente.

Previsión de XAIPART

Este breve incluye una previsión refutable.

Piezas afectadas

No hay coincidencia en el catálogo para esta historia — no se muestra nada en lugar de inferir una coincidencia.

Reported by CNX-Software on . Summarized and analyzed by XAIPART Editorial.

What happened

Geekworm, working with Mcuzone, has launched the UPS Scap 5V5A, a supercapacitor-based uninterruptible power supply HAT designed for the Raspberry Pi 5.S1 The board is intended to keep the Raspberry Pi running "long enough (a few seconds to a few minutes) to save data and shut down safely," rather than to provide hours of backup power.S1

The HAT is offered in three supercapacitor variants rated 100F, 60F, and 22F.S1 It integrates a Power Delivery chip to negotiate a true 5V/5A output, which is described as sufficient to run the Raspberry Pi 5 "without triggering the low-voltage warnings that can happen with some power supplies."S1 Power-loss detection is handled through pogo pins on the Raspberry Pi 5, and an I2C interface exposes voltage and current readings in real time.S1

The module accepts two independent power inputs: a wide-voltage DC barrel jack and a standard USB-C PD charger.S1 The combination of pogo-pin loss detection, I2C telemetry and dual inputs lets the host software decide whether to initiate an orderly shutdown or continue running, depending on the supercap variant installed.

Key numbers
MetricReported valueSource
Output rail negotiated5V / 5A[S1]
Supercapacitor options22F / 60F / 100F[S1]
Backup runtime targetA few seconds to a few minutes[S1]
Power inputsDC barrel jack (wide voltage) and USB-C PD[S1]
Host interface for telemetryI2C (voltage, current)[S1]
Power-loss detection pathPogo pins to Raspberry Pi 5[S1]
Street price / availabilityNot disclosed[S1]

Background timeline

  1. - Geekworm and Mcuzone publicly introduce the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5 in 22F, 60F, and 100F versions, with 5V/5A PD output, pogo-pin loss detection and I2C telemetry.[S1]
  2. No prior milestones disclosed by the source.

XAIPART take

Technical impact

The 5V/5A PD negotiation is the meaningful change here: prior Raspberry Pi 5 HAT designs often relied on 5V/3A or 5V/4A sources and tripped the bootloader low-voltage warning under CPU load.S1 A HAT that pulls 5A cleanly is closer to a "drop-in" power source for Pi 5 industrial builds, especially when paired with a USB-C PD brick on the second input.

Pogo-pin sensing plus an I2C telemetry channel is a deliberate design choice for fleet deployment: a daemon on the Pi can read voltage and current continuously and trigger an orderly shutdown before the supercaps collapse.XAIPART analysis

Market impact

Three capacitance tiers (22F/60F/100F) let buyers tune cost-per-node against acceptable shutdown window, which is more granular than typical single-value UPS HATs in this segment.S1 For small-batch industrial or kiosk integrators, that tiering can simplify BOMs across product lines that previously needed different UPS boards per site.XAIPART analysis

Supercapacitor-based UPS parts generally ship with shorter lead times than Li-ion battery UPS HATs, which have faced periodic shipping constraints on hobbyist channels; sourcing teams should still verify any RoHS/UN38.3 documentation is provided even though no cells are present.XAIPART analysis

Action

Engineering teams prototyping Pi 5 gateways or HMIs should shortlist the 60F or 100F variants for any deployment where an unclean shutdown corrupts state (databases, MQTT buffers, SD-card journaling).XAIPART analysis

Procurement should request Geekworm's I2C register map and any reference shutdown daemon before issuing a POs, and confirm whether the dual-input feature supports hot-swap between the DC barrel jack and the USB-C PD source for redundant-power topologies.XAIPART analysis

XAIPART Forecast

XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price under 5 USD per 10F of rated capacitance; if no tier is listed in stock at two distributors by 2027-06-30, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Pricing, distributor stock and certifications (CE/FCC/UN38.3) were not disclosed in the source and remain unverified.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Alternativas y ciclo de vida

Alternativas registradas — alcance del catálogo, no una clasificación de mercado
PiezaRelaciónCiclo de vidaBase
— No hay alternativa registrada FALTAN DATOS — Requiere match_type antes de que pueda aparecer cualquier etiqueta de predecesor

Las etiquetas «predecesor» y «alternativa» proceden únicamente de un tipo de coincidencia registrado, un estado del ciclo de vida o el texto de la fuente. Cuando no hay coincidencia registrada, no se muestra ninguna etiqueta. Nuestros propios anuncios no son una referencia de mercado.

Qué hay que vigilar

Previsión refutable — umbral, ventana y estado actual. Las previsiones refutadas permanecen visibles.
AfirmaciónUmbralPorEstado
XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price un... no tier is listed in stock at two distributors by 2027-06-30 Pending

Las previsiones que resultan erróneas se mantienen visibles y marcadas. No las eliminamos.

Piezas afectadas

Sin coincidencia en el catálogo. Esta historia no se corresponde con ninguna pieza listada actualmente en XAIPART. No inferimos coincidencias ni mostramos una lista de marcador de posición.

Dónde encaja esto en la historia

Event chain · as of 2026-10-18T04:00:34+08:00 · nodes link to published articles on this site.
Event chain — raspberry-pi+new-productsChain nodes: 2026-10-11 Nuvoton amplió la serie NuMicro MA35D0 con tres piezas LQFP128 y lanzó la placa NuMaker-IoT-MA35D0-A2, que combina doble Cortex-A35 con un Cortex-M4 para E/S en tiempo real.; 2026-10-11 DEBIX ha lanzado una SBC de grado industrial impulsada por el SoC MediaTek Genio 720 (MT8391) con una NPU de 9 TOPS, interfaces de doble pantalla y un rango de -40 °C a 85 °C.; 2026-10-11 Geekworm y Mcuzone comercializan un HAT UPS de supercondensador de 5 V/5 A para la Raspberry Pi 5 en variantes de 22 F/60 F/100 F, con detección por pogo-pin y telemetría I2C.; 2026-10-11 El firmware de código abierto DSPi permite que Raspberry Pi Pico y Pico 2 actúen como tarjeta de sonido USB con ecualizador paramétrico, crossover y hasta 8 canales de salida.; 2026-10-11 Walnut Pi ha lanzado un Compute Module con huella CM5 basado en el Allwinner T527 octa-core Cortex-A55, con hasta 4 GB LPDDR4, 16 GB eMMC, WiFi 6 y una NPU de 2 TOPS.; 2026-10-18 Dos placas de 50x26 mm —una CPU y una FPGA— controlan paneles de 1920x1080 o 1366x768 mediante LVDS, eDP, DVI o VGA para interfaces de usuario embebidas bare-metal.. As of 2026-10-18T04:00:34+08:00. Open forecast: Nuvoton amplió la serie NuMicro MA35D0 con tres piezas LQFP128 y lanzó l — pending Open forecast: DEBIX ha lanzado una SBC de grado industrial impulsada por el SoC MediaT — pending.2026-10-11Nuvoton amplió la our brief ↗2026-10-11DEBIX ha lanzado uour brief ↗2026-10-11Geekworm y Mcuzoneour brief ↗this brief2026-10-11El firmware de códour brief ↗2026-10-11Walnut Pi ha lanzaour brief ↗2026-10-18Dos placas de 50x2our brief ↗Open forecast: Nuvoton amplió la serie NuMicro MA35D0 con tres piezas LQFP128 y lanzó l — pendingOpen forecast: DEBIX ha lanzado una SBC de grado industrial impulsada por el SoC MediaT — pending
  1. nuvoton-adds-three-ma35d0-lqfp128-mpus-and-compact-45-45-mm-chili-pro-eval-board-for-industrial-ai2026-10-11
  2. debix-m8391-01-sbc-brings-mediatek-genio-720-9-tops-npu-to-industrial-edge-builds2026-10-11
  3. geekworm-ups-scap-5v5a-supercapacitor-hat-adds-graceful-shutdown-to-raspberry-pi-5-designs2026-10-11
  4. dspi-firmware-turns-rp2040-rp2350-boards-into-usb-sound-cards-with-onboard-dsp2026-10-11
  5. walnut-pi-cm2-targets-raspberry-pi-cm5-sockets-at-lower-cost-with-allwinner-t5272026-10-11
  6. cuprumflow-graphics-adds-hd-ui-to-mcu-projects-without-an-os2026-10-18
  1. Nuvoton amplió la serie NuMicro MA35D0 con tres piezas LQFP128 y lanzó la placa NuMaker-IoT-MA35D0-A2, que combina doble Cortex-A35 con un Cortex-M4 para E/S en tiempo real.
  2. DEBIX ha lanzado una SBC de grado industrial impulsada por el SoC MediaTek Genio 720 (MT8391) con una NPU de 9 TOPS, interfaces de doble pantalla y un rango de -40 °C a 85 °C.
  3. Geekworm y Mcuzone comercializan un HAT UPS de supercondensador de 5 V/5 A para la Raspberry Pi 5 en variantes de 22 F/60 F/100 F, con detección por pogo-pin y telemetría I2C.
  4. El firmware de código abierto DSPi permite que Raspberry Pi Pico y Pico 2 actúen como tarjeta de sonido USB con ecualizador paramétrico, crossover y hasta 8 canales de salida.
  5. Walnut Pi ha lanzado un Compute Module con huella CM5 basado en el Allwinner T527 octa-core Cortex-A55, con hasta 4 GB LPDDR4, 16 GB eMMC, WiFi 6 y una NPU de 2 TOPS.
  6. Dos placas de 50x26 mm —una CPU y una FPGA— controlan paneles de 1920x1080 o 1366x768 mediante LVDS, eDP, DVI o VGA para interfaces de usuario embebidas bare-metal. aggregator

La cadena se construye únicamente con breves publicados — un nodo sin breve no se dibuja.

Presión de costes por dimensión

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Cómo se elaboró

Evidencia del proceso — obtención, verificación de fuentes, modelo y filtro
Registro de auditoría de este breve
Source fetched CNX-Software · www.cnx-software.com · 2,016 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,562 tokens · 54.7s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.047813 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Cada fila anterior la produce el flujo de trabajo, no se escribe a mano.

Puntuación editorial

Resultado del filtro determinista — PHP puro, sin intervención del modelo en el veredicto
Desglose de la puntuación del filtro 6 comprobaciones aplicables, 6aprobadas: 100 %. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155. Comprobaciones aplicables superadas 6 / 6 = 100% · veredicto: hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.5155 El filtro decide la publicación. La puntuación de la auditoría independiente es solo consultiva.
¿Ha encontrado un error? Díganos qué está mal — las correcciones se publican junto al texto original y se registran. No editamos los artículos en silencio.

Comentarios

Sea el primero en comentar.

Fuentes

  1. Geekworm UPS Scap 5V5A – A supercapacitor UPS HAT for Raspberry Pi 5 — https://www.cnx-software.com/2026/10/05/geekworm-ups-scap-5v5a-a-supercapacitor-ups-hat-for-raspberry-pi-5/ · rss · consultado

Los hechos están marcados como S1/S2 y se remontan a la fuente enlazada. Los pasajes etiquetados análisis son el razonamiento propio de XAIPART, mantenido separado de los hechos reportados. Se siguen los enlaces de las fuentes en lugar de nofollow — la atribución es intencionada.