Reported by CNX-Software on . Summarized and analyzed by XAIPART Editorial.
What happened
Geekworm, working with Mcuzone, has launched the UPS Scap 5V5A, a supercapacitor-based uninterruptible power supply HAT designed for the Raspberry Pi 5.S1 The board is intended to keep the Raspberry Pi running "long enough (a few seconds to a few minutes) to save data and shut down safely," rather than to provide hours of backup power.S1
The HAT is offered in three supercapacitor variants rated 100F, 60F, and 22F.S1 It integrates a Power Delivery chip to negotiate a true 5V/5A output, which is described as sufficient to run the Raspberry Pi 5 "without triggering the low-voltage warnings that can happen with some power supplies."S1 Power-loss detection is handled through pogo pins on the Raspberry Pi 5, and an I2C interface exposes voltage and current readings in real time.S1
The module accepts two independent power inputs: a wide-voltage DC barrel jack and a standard USB-C PD charger.S1 The combination of pogo-pin loss detection, I2C telemetry and dual inputs lets the host software decide whether to initiate an orderly shutdown or continue running, depending on the supercap variant installed.
| Metric | Reported value | Source |
|---|---|---|
| Output rail negotiated | 5V / 5A | [S1] |
| Supercapacitor options | 22F / 60F / 100F | [S1] |
| Backup runtime target | A few seconds to a few minutes | [S1] |
| Power inputs | DC barrel jack (wide voltage) and USB-C PD | [S1] |
| Host interface for telemetry | I2C (voltage, current) | [S1] |
| Power-loss detection path | Pogo pins to Raspberry Pi 5 | [S1] |
| Street price / availability | Not disclosed | [S1] |
Background timeline
- - Geekworm and Mcuzone publicly introduce the UPS Scap 5V5A supercapacitor UPS HAT for the Raspberry Pi 5 in 22F, 60F, and 100F versions, with 5V/5A PD output, pogo-pin loss detection and I2C telemetry.[S1]
- No prior milestones disclosed by the source.
XAIPART take
Technical impact
The 5V/5A PD negotiation is the meaningful change here: prior Raspberry Pi 5 HAT designs often relied on 5V/3A or 5V/4A sources and tripped the bootloader low-voltage warning under CPU load.S1 A HAT that pulls 5A cleanly is closer to a "drop-in" power source for Pi 5 industrial builds, especially when paired with a USB-C PD brick on the second input.
Pogo-pin sensing plus an I2C telemetry channel is a deliberate design choice for fleet deployment: a daemon on the Pi can read voltage and current continuously and trigger an orderly shutdown before the supercaps collapse.XAIPART analysis
Market impact
Three capacitance tiers (22F/60F/100F) let buyers tune cost-per-node against acceptable shutdown window, which is more granular than typical single-value UPS HATs in this segment.S1 For small-batch industrial or kiosk integrators, that tiering can simplify BOMs across product lines that previously needed different UPS boards per site.XAIPART analysis
Supercapacitor-based UPS parts generally ship with shorter lead times than Li-ion battery UPS HATs, which have faced periodic shipping constraints on hobbyist channels; sourcing teams should still verify any RoHS/UN38.3 documentation is provided even though no cells are present.XAIPART analysis
Action
Engineering teams prototyping Pi 5 gateways or HMIs should shortlist the 60F or 100F variants for any deployment where an unclean shutdown corrupts state (databases, MQTT buffers, SD-card journaling).XAIPART analysis
Procurement should request Geekworm's I2C register map and any reference shutdown daemon before issuing a POs, and confirm whether the dual-input feature supports hot-swap between the DC barrel jack and the USB-C PD source for redundant-power topologies.XAIPART analysis
XAIPART Forecast
XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price under 5 USD per 10F of rated capacitance; if no tier is listed in stock at two distributors by 2027-06-30, this forecast is wrong.XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Pricing, distributor stock and certifications (CE/FCC/UN38.3) were not disclosed in the source and remain unverified.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
代替品とライフサイクル
| 部品 | 関係 | ライフサイクル | 根拠 |
|---|---|---|---|
| — | 登録済みの代替品はありません データ不足 | — | 前身ラベルを表示するには match_type が必要です |
「前身」および「代替」のラベルは、記録された一致タイプ、ライフサイクルステータス、またはソーステキストに基づく場合にのみ付与されます。一致が記録されていない場合、ラベルは表示されません。当社の掲載情報は市場の基準ではありません。
注視すべき点
| 主張 | しきい値 | 著者: | ステータス |
|---|---|---|---|
| XAIPART expects that, by Q2 2027, at least one of the three UPS Scap 5V5A capacitance tiers (22F, 60F or 100F) will be listed in stock at two or more XAIPART-tracked distributor catalogs with a published unit price un... | no tier is listed in stock at two distributors by 2027-06-30 | Pending |
誤りだった予測は表示されたままマークされます。削除することはありません。
影響を受ける部品
カタログに一致するものはありません。 この記事は、現在XAIPARTに掲載されているどの部品にも該当しません。一致を推測することはなく、プレースホルダーのリストも表示しません。
ストーリー内の位置づけ
- nuvoton-adds-three-ma35d0-lqfp128-mpus-and-compact-45-45-mm-chili-pro-eval-board-for-industrial-ai
- debix-m8391-01-sbc-brings-mediatek-genio-720-9-tops-npu-to-industrial-edge-builds
- geekworm-ups-scap-5v5a-supercapacitor-hat-adds-graceful-shutdown-to-raspberry-pi-5-designs
- dspi-firmware-turns-rp2040-rp2350-boards-into-usb-sound-cards-with-onboard-dsp
- walnut-pi-cm2-targets-raspberry-pi-cm5-sockets-at-lower-cost-with-allwinner-t527
- cuprumflow-graphics-adds-hd-ui-to-mcu-projects-without-an-os
- NuvotonはNuMicro MA35D0シリーズを3つのLQFP128品番で拡張し、NuMaker-IoT-MA35D0-A2ボードを発表。デュアルCortex-A35とCortex-M4を組み合わせリアルタイムI/Oを実現。
- DEBIXはMediaTekのGenio 720(MT8391)SoCを搭載した産業グレードSBCを発表。9-TOPS NPU、デュアルディスプレイインターフェース、-40°C~85°Cの範囲。
- GeekwormとMcuzoneはRaspberry Pi 5向け5V/5AスーパーキャパシタUPS HATを22F/60F/100Fバリエーションで出荷。ポゴピン検出とI2Cテレメトリを搭載。
- オープンソースのDSPiファームウェアにより、Raspberry Pi PicoおよびPico 2がパラメトリックEQ、クロスオーバー、最大8出力チャネルを備えたUSBサウンドカードとして動作します。
- Walnut PiはAllwinner T527オクタコアCortex-A55をベースに、最大4GB LPDDR4、16GB eMMC、WiFi 6、2 TOPS NPUを備えたCM5フットプリントのCompute Moduleを発表しました。
- 50x26 mmの2枚のボード(1枚はCPU、1枚はFPGA)が、ベアメタル組み込みUI向けにLVDS、eDP、DVI、またはVGA経由で1920x1080または1366x768パネルを駆動する。 aggregator
チェーンは公開済みのブリーフのみから構築されます。ブリーフのないノードは描画されません。
次元別のコスト圧力
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
この記事の制作方法
プロセス証跡 — 取得、ソースの妥当性、モデル、ゲート
| Source fetched | CNX-Software · www.cnx-software.com · 2,016 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,562 tokens · 54.7s · run completed |
| Gate | verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.047813 · C10 rounds 0 |
| Time contract | 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only) |
上記のすべての行はパイプラインによって生成されており、手作業で書かれたものではありません。
コメント
最初のコメントを投稿しましょう。
🔐 コメントするには ログイン してください。
アカウントをお持ちでないですか? 新規登録