Integrierte Schaltungen

P5020NSE7QMB-FR

P5020NSE7QMB-FR - QorIQ P5 Dual-Core 1.6GHz SoC | NXP

The NXP P5020NSE7QMB-FR is a dual-core 64-bit Power Architecture SoC from the QorIQ P5 platform, integrating two e5500 cores running up to 1.6 GHz with hardware-accelerated SEC 4.2 security, DDR3/DDR3L memory controllers, PCIe, GbE, and Serial RapidIO (SRIO) interfaces in a 1295-pin FCPBGA (37.5 x 37.5 mm) package. The P5 platform leverages architectural features pioneered in NXP's high-end communications processors, scaling single-threaded efficiency for control plane and compute-intensive workloads. A QorIQ SoC is a system-on-chip built on the Power Architecture instruction set, designed for embedded networking, industrial control, and aerospace applications. The P5 platform layers on top of the broader QorIQ family (P1/P2/P3/P4/P5) and serves as a mid-to-high tier offering between entry P-series parts and T-series flagship processors, supporting rich IO integration that historically required external bridge chips. Key features of the P5020NSE7QMB-FR include dual e5500 cores with out-of-order execution, integrated SEC 4.2 hardware encryption for IPsec, SSL, and SRTP acceleration, a high-bandwidth DDR3/DDR3L memory subsystem, and a flexible SerDes-based IO fabric providing PCIe Gen2, 10 Gigabit Ethernet (XAUI), and SRIO links. The 1295-FCPBGA package is designed for industrial thermal environments and supports the full P5 platform functionality. This part is the Freescale/NXP legacy tape-and-reel variant, supplied by authorized stockists such as Rochester Electronics, and targets long-lifecycle embedded designs in networking infrastructure, defense/aerospace control planes, and secure industrial compute platforms. Typical applications include multicore control plane processors for routers and switches, defense and aerospace command/control systems, secure IoT gateways, industrial automation controllers, and single-board computers. The part's combination of high single-thread performance and hardware-accelerated cryptography targets workloads where deterministic response and integrated security matter. When designing with this device, allocate proper PCB area for the 37.5 x 37.5 mm FCPBGA package, ensure robust power-rail sequencing for the multiple voltage domains, and validate thermal design against the worst-case junction temperature specified by NXP. Reference the NXP P5020 hardware design guide and reference schematics for platform bring-up and signal-integrity layouts.

Angebot Kontakt

P5020NSE7TNB

P5020NSE7TNB - QorIQ Dual-Core PowerPC SoC 2.0GHz | NXP

The NXP (formerly Freescale) P5020NSE7TNB is a QorIQ P5 series dual-core microprocessor based on the 64-bit Power Architecture e5500 core, delivered in a 1295-pin FCPBGA (37.5 x 37.5 mm) package. It operates at up to 2.0 GHz and integrates a dual-core complex, SEC 4.2 security accelerator, DDR3/DDR3L memory controllers, PCIe, Gigabit Ethernet, Serial RapidIO (SRIO), and pattern-matching hardware acceleration for control-plane and high-performance networking workloads. A microprocessor (MPU) is the central processing element of an embedded computing system. Within the SoC taxonomy, the P5020 sits at the top of the hierarchy: microprocessor (MPU) > multi-core SoC > communications processor > network infrastructure SoC. The QorIQ P5 family is specifically engineered for control-plane and packet-processing tasks in routers, switches, base stations, and industrial automation controllers, where deterministic single-thread performance and high I/O bandwidth matter more than raw core count. Key features include dual e5500 cores with out-of-order execution, 80 GHz effective frequency-equivalent throughput per core, hardware-accelerated security (SEC 4.2) for IPSec, SSL/TLS, and 3GPP wireless protocols, hardware pattern-matching engine for L2-L7 deep packet inspection, integrated 64-bit DDR3/3L controller with ECC supporting up to 32 GB of addressable memory, and SerDes supporting multiple protocols: three PCIe Gen2 controllers, up to 10 Gigabit Ethernet ports, and two SRIO lanes. The architecture uses a hierarchical interconnect with CoreNet coherency fabric and platform cache, enabling tight cache coherency between cores, I/O, and accelerators. The SEC engine and pattern-matcher operate autonomously, offloading security and DPI tasks that would otherwise consume core cycles, which is critical for line-rate throughput. Typical applications include enterprise routers and switches, 4G/LTE baseband units, industrial automation controllers, network-attached storage (NAS) controllers, and military/aerospace secure communications. This specific part suffix (T7) targets the 0 to 105C extended-temperature industrial range, while the 2.0 GHz core speed (versus the lower binned 1.8 GHz P5020NSE variants) supplies headroom for compute-bound networking workloads. When designing with this part, allocate proper thermal management: at full load a 1295-FCPBGA dissipates 15-30 W depending on activity, requiring a heatsink or cold-plate. DDR3 traces must be length-matched within tight tolerances per the QorIQ design checklist, and the SEC/PATTERN engines each require dedicated firmware/license provisioning. This page synthesizes distributor availability, drop-in QorIQ family alternatives from verified sources, and practical design notes not collated in the manufacturer datasheet alone.

Angebot Kontakt

P5020NSE7VNB

P5020NSE7VNB - QorIQ Dual-Core 2GHz Power Arch SoC | NXP

The NXP P5020NSE7VNB is a 64-bit dual-core QorIQ P5 communications processor built on the e5500 Power Architecture core, operating at up to 2.0 GHz with a 1295-ball FC-PBGA package (37.5x37.5 mm) and 0C to 105C industrial temperature range. It integrates a dual-core CPU complex with large caches, a DDR3 memory controller with ECC, multiple Gigabit Ethernet interfaces, PCI Express Gen2, Serial RapidIO (SRIO), a hardware pattern-matching accelerator, and SEC security engines, targeting control-plane and compute-intensive networking workloads. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions fetched from memory and orchestrating I/O peripherals. Modern communications MPUs such as the P5020 family combine multi-core CPU subsystems, memory controllers, high-speed serial interfaces, and hardware accelerators on a single die - a system-on-chip (SoC). QorIQ P5 sits in NXP's Power Architecture SoC hierarchy between the lower-power QorIQ P1/P2 tiers and the higher-end P4xxx/P5xxx families, optimized for high single-thread performance in routing, switching, and wireless base-station control planes. Key feature highlights: 2.0 GHz dual e5500 cores with out-of-order execution, integrated DDR3/DDR3L controller with ECC, up to three PCI Express Gen2 controllers, two SRIO controllers (supporting 1x/4x lanes), multiple GbE interfaces with packet acceleration, SEC 4.0 security engine for encryption/IPsec, and a built-in pattern-matching engine for deep-packet inspection. The 1295-ball FC-PBGA exposes all high-speed serial links while supporting legacy parallel I/O. Architecturally, the P5020 leverages the e5500 core's 7-stage pipeline with hardware multithreading support, dual-issue dispatch, and large L1/L2 caches. The SoC integrates a coherent interconnect fabric that ties CPU cores to memory controllers, networking engines, and acceleration blocks - reducing external component count and enabling deterministic throughput on control-plane tasks. Typical applications include industrial control routers, LTE/4G small-cell base stations, network-attached storage (NAS), security appliances (firewalls, VPN gateways), software-defined networking (SDN) controllers, and industrial automation controllers requiring deterministic single-thread performance. The wide peripheral mix also suits network-attached test equipment and aerospace-grade networking platforms. When designing with this device, pay attention to PCB layout: the 1295-ball 1.0 mm-pitch FC-PBGA demands HDI substrate fabrication, controlled-impedance routing for SERDES lanes, and careful power-rail decoupling. The 0-105C industrial temperature range supports deployment in fan-cooled enclosures but not extended-temperature outdoor installations. This page synthesizes NXP datasheet parameters, distributor pricing, and packaging/footprint notes that complement - but do not replace - the official QorIQ P5020 reference manual. The page also lists drop-in and parametric alternatives useful when the standard part is out of stock.

Angebot Kontakt

P5020NSN1QMB557

P5020NSN1QMB557 - QorIQ Dual-Core 1.6GHz SoC | NXP | Networking

The NXP P5020NSN1QMB557 is a QorIQ dual-core 64-bit Power Architecture system-on-chip (SoC) operating at up to 1.6 GHz, housed in a 1295-ball FCPBGA package (37.5x37.5 mm). Based on the e5500 core built on Power Architecture technology, the device integrates dual e5500 cores with hardware acceleration, DDR3 memory controller, PCIe, GbE, and Serial RapidIO (SRIO) interfaces for high-performance networking and embedded computing workloads. A QorIQ SoC (System-on-Chip) is a communications processor family originally developed by Freescale Semiconductor (now part of NXP) that integrates one or more CPU cores, memory controllers, and a rich set of high-speed I/O peripherals into a single device. Within the broader semiconductor taxonomy, the QorIQ P5 series sits between general-purpose microprocessors and application-specific ASSPs: it is more configurable than a fixed-function networking ASIC yet more integrated than a CPU + external chipset. The P5020 specifically targets enterprise WLAN controllers, network attached storage (NAS), industrial control, and defense/aerospace platforms that require deterministic multi-core performance with hardware-accelerated packet processing. Key features of the P5020NSN1QMB557 include dual e5500 64-bit Power Architecture cores, up to 1.6 GHz core frequency with frequencies scalable to 2.0 GHz on related P5020NSN1QMB parts, an integrated DDR3 memory controller with ECC support, multiple PCIe Gen2 interfaces, dual GbE ports, and Serial RapidIO for backplane interconnect. The 1577 suffix in the part decoder denotes a 0 to 105 C extended-temperature grade and no encryption, while the 1.6 GHz speed grade is encoded by NSN1. Architecturally, the device combines the dual e5500 superscalar out-of-order cores with a 64-bit AMBA fabric, a hardware pattern-matching engine (Trusted Execution), and on-chip SRAM. Each core has its own L1 cache (32 KB instruction + 32 KB data) and a shared 512 KB L2 backside cache with ECC, giving the SoC headroom for latency-sensitive control-plane workloads while sustaining line-rate throughput on parallel data-plane tasks. Typical applications for P5020NSN1QMB557 include enterprise wireless LAN controllers, multi-radio access points, network attached storage (NAS) controllers, secure routers, industrial machine controllers, defense signal-processing subsystems, and base-station control-plane processors. The combination of dual cores, hardware offload, and DDR3 bandwidth is well matched to control-plane + data-plane partitioning. When designing with this part, plan the PCB for the 37.5x37.5 mm FCPBGA-1295 footprint, ensuring symmetric via-in-pad escape with 1.0 mm pitch or finer. Decoupling must use bulk ceramic + polymer tantalum arrays as called out in the NXP hardware design guide; expect reference clock jitter under 150 fs RMS for SerDes operation. This page synthesizes authorized distributor pricing, drop-in alternatives, and practical hardware-design guidance not found in the manufacturer datasheet alone.

Angebot Kontakt

P5020NSN1TNB

P5020NSN1TNB - QorIQ P5020 Dual-Core 1.8GHz SoC | NXP | Networking

The NXP P5020NSN1TNB is a QorIQ P5020 dual-core 64-bit Power Architecture SoC microprocessor that integrates two e5500 cores running at up to 2.0 GHz with a high-performance datapath accelerator, packaged in a 1295-pin FCPBGA (37.5 mm x 37.5 mm). It targets wired and wireless networking, industrial control, and military/aerospace applications requiring multi-gigabit data-plane offload alongside application processing. According to NXP/Freescale documentation, the silicon integrates DDR3/3L memory controllers, multiple PCIe Gen2/Gen3 controllers, GbE interfaces, Serial RapidIO (sRIO), and dedicated data-path acceleration for network and storage workloads. A QorIQ SoC is a multi-core communications processor family built on the Power Architecture instruction set, designed to consolidate control-plane and data-plane processing for networking equipment, industrial gateways, and aerospace subsystems into a single device. The P5020NSN1TNB sits in the P5 mid-tier of the QorIQ family, bridging between entry-level P1/P2 parts and higher-end P4/P4080 multi-core SoCs, and is typically paired with external PHYs, switching fabrics, and timing devices in a chassis design. Key differentiating features include the integrated DPAA (Data Path Acceleration Architecture) engine for packet parsing, queue management, and crypto offload, hardware virtualization support, and ECC-protected DDR3/3L memory up to 8 GB capacity. The device delivers up to 24 Gbps aggregate I/O throughput and supports pre-validated firmware ecosystems (U-Boot, VxWorks, Linux SDK) for accelerated product development. The large 1295-ball FCPBGA exposes the full SerDes lane count required for multi-PCIe, sRIO, and 10 GbE configurations. Typical applications include multi-service routers and switches, line cards for wireless base stations, industrial protocol gateways and PLCs, network-attached storage controllers, secure gateways with IPsec/SSL acceleration, and flight-grade compute for unmanned vehicles. According to distributor documentation, the operating temperature grade is 0 to 105 degrees C. The 'TNB' suffix specifically denotes a tray-packaged, standard-temperature, no-encryption variant distinct from the '7TNB' (extended temp) and Q-suffixed (encryption-enabled) variants. When designing with the P5020NSN1TNB, evaluate thermal dissipation of the 1295-ball FCBGA carefully: the package's large body and high TDP typically demand a heatsink plus chassis airflow. SerDes lane routing on the PCB must follow NXP's reference design rules for multi-gigabit signals (PCIe Gen3, sRIO, 10 GbE) to maintain signal-integrity margins; designers should allocate the full 8-layer stack-up recommended in the hardware design guide. Compared to higher-bin P5020 variants (e.g. 2.0 GHz parts), this 1.8 GHz bin trades peak frequency for lower cost in volume production of networking appliances. This page synthesizes distributor pricing, live stock data, drop-in alternative P5020 family variants, and practical design guidance not collected in one place in the datasheet alone. Engineers evaluating the QorIQ P5 platform for embedded designs will find a consolidated reference of electrical specs, package dimensions, pinout characteristics, and lifecycle status.

Angebot Kontakt

P5020NSN7MMB557

P5020NSN7MMB557 - QorIQ P5 Dual-Core 1.2GHz SoC | NXP | Networking

The NXP P5020NSN7MMB557 is a QorIQ P5 series 64-bit Power Architecture system-on-chip (SoC) featuring two e5500 cores running at up to 1.2 GHz, housed in a 1295-ball FC-PBGA package measuring 37.5 mm x 37.5 mm with a 1.00 mm ball pitch. The device integrates DDR3 memory controller, PCIe, GbE, Serial RapidIO (SRIO), and hardware acceleration engines for networking offload. The silicon revision is R2.0 and the part is qualified for the 0C to +105C extended industrial temperature range, targeting embedded networking infrastructure. A SoC (System-on-Chip) integrates a CPU complex, memory controller, high-speed I/O peripherals, and often hardware acceleration blocks into a single silicon die. The QorIQ P5 platform belongs to NXP's communications processor family built on Power Architecture technology, positioned between general-purpose embedded microprocessors and full multi-core DSP/ASIC designs. The hierarchy: Power Architecture core -> QorIQ SoC platform -> communications processor -> embedded microprocessor -> semiconductor IC. This consolidation reduces board area, BOM cost, and power envelope versus a CPU-plus-discrete-peripheral approach. Key features include dual e5500 superscalar 64-bit cores, large L1/L2 caches for deterministic throughput, integrated DDR3 memory controller with ECC, multiple high-speed serial interfaces for fabric connectivity, and a hardware accelerator block for packet processing and security offload. The 1295-FCPBGA package provides the signal and power-pin density required to expose this I/O set while maintaining manageable BGA escape routing. The architecture combines out-of-order execution cores with coherently shared L2 cache, an integrated CoreNet fabric for coherent multi-core traffic, and pattern-matching engines for deep packet inspection. Hardware acceleration of encryption (SEC) and regular expression (PATGEN) frees CPU cycles for control-plane and exception-path workloads typical in networking equipment. Typical applications include enterprise routers and switches, network attached storage (NAS), industrial control with networking, LTE/4G base station control-plane, and smart-grid or military/aerospace secure routers. The combination of dual cores at 1.2 GHz, hardware crypto, and multi-protocol fabric make it well suited for mid-range managed switches and edge routers. When designing with this part, allocate sufficient PCB layers (typically 8+ with 2 buried for power) for clean BGA breakout and high-speed signal integrity. The 1.00 mm ball pitch requires 0.6 mm/0.45 mm laser-drilled microvias for inner-layer escape. Provide a high-efficiency multi-phase VRM for the core rail - transient excursions under load can exceed 30 A. This page synthesizes distributor pricing, same-brand QorIQ family drop-in variants, parameter proximity data, and PCB layout guidance that is not contained in the single manufacturer datasheet, helping embedded designers shorten qualification cycles.

Angebot Kontakt

P5020NSN7QMB

P5020NSN7QMB - QorIQ Dual-Core 1.6GHz e5500 SoC, 1295-FCBGA | NXP

The NXP (formerly Freescale) P5020NSN7QMB is a dual-core 64-bit Power Architecture SoC from the QorIQ P5 platform, integrating two e5500 cores operating up to 2.0 GHz (1.6 GHz SKU designation in the part suffix "NSN7") with on-chip DDR3/3L memory controller, PCIe Gen2, Serial RapidIO (SRIO), dual GbE controllers, hardware-acceleration engines, and high-speed SerDes lanes, all in a 1295-ball FCBGA package. The device targets high-throughput embedded networking and industrial control workloads where deterministic latency, multi-protocol I/O, and Power Architecture software ecosystem compatibility are required. As a QorIQ communications processor (Power Architecture -> embedded MPU -> SoC -> semiconductor), the P5020NSN7QMB sits within NXP's tier of multi-core SoCs that replaced older PowerQUICC parts. The e5500 core implements the Book-E augmented Power Architecture with hypervisor and virtualization support, giving designers access to a mature toolchain (CodeWarrior, GCC) and established operating systems such as Linux and VxWorks. The dual-core 1.6 GHz configuration in this SKU balances per-thread performance against thermal envelope, with a maximum junction temperature of 105 C enabling fanless deployment with adequate heatsinking. Key features of the P5020NSN7QMB include dual e5500 64-bit cores with integrated L1/L2 caches, a 64-bit DDR3/DDR3L memory controller with ECC, three PCIe Gen2 controllers, four SRIO ports, two RGMII 10/100/1000 Ethernet controllers, dedicated hardware engines for pattern matching, queue management, and cryptography (SEC), plus multiple UART, I2C, SPI, USB, and GPIO interfaces. The integrated Data Path Acceleration Architecture (DPAA) offloads packet classification, queueing, and crypto hardware acceleration from the cores, which is critical for line-rate networking throughput at multi-GbE aggregate traffic. Typical applications of the P5020NSN7QMB include industrial control and factory automation PLCs, networked industrial gateways, military/aerospace signal processing, mid-range routers and switches, secure network appliances, factory IoT gateways, and defense embedded computing. The combination of dual GbE, PCIe, and SRIO makes it well suited as a control-plane or fast-path processor in Software Defined Networking (SDN) and Network Functions Virtualization (NFV) hardware. The device is also used in industrial automation, machine vision preprocessing, and edge compute where deterministic real-time response is essential. When designing with this SoC, ensure the 37.5x37.5 mm FCBGA land pattern is laid out to NXP's escape recommendations - the high pin count (1295 balls, 1.0 mm pitch typical for this family) requires HDI PCB stackup and matched-length SerDes routing. Boot configuration, clocking, and reset sequencing follow the QorIQ P5020 reference manual, and the integrated SEC engine requires software driver initialization. Memory channel routing must adhere to DDR3 fly-by topology to preserve signal integrity at the target data rate.

Angebot Kontakt

P5020NSN7QMB557

P5020NSN7QMB557 - QorIQ P5 Dual-Core 2.0GHz SoC | NXP

The NXP P5020NSN7QMB557 is a QorIQ P5 series 64-bit Power Architecture system-on-chip (SoC) with two e5500 cores running up to 2.0 GHz, housed in a 1295-ball FC-PBGA package measuring 37.5 x 37.5 mm. The P5020 integrates dual PowerPC e5500 cores with up to 2.0 GHz clock speed and includes hardware acceleration, DDR3 memory controller, PCIe, Serial RapidIO (SRIO), and Gigabit Ethernet interfaces. A QorIQ SoC is a multi-core communications processor that combines CPU cores, memory controllers, packet processing accelerators, and high-speed serial interfaces on a single die. QorIQ P5 series sits between the lower-tier P1/P2 single-/dual-core parts and the higher-tier P4 quad-core family, targeting mid-range networking, industrial control, and secure compute applications where deterministic throughput is required. Key features of the P5020 include dual e5500 64-bit cores with integrated 32 KB I-cache and 32 KB D-cache per core, a 512 KB platform cache, a DDR3/3L memory controller with ECC support, three PCIe Gen 2 controllers, two SRIO controllers, multiple Gigabit Ethernet ports, and hardware engines for packet classification, encryption (SEC), and pattern matching (PME). The SoC supports a nominal core voltage of 1.05 V to 1.15 V and a 0C to 105C operating temperature range per the commercial-grade designation "N" suffix. Architecturally, the P5020 uses a coherent fabric interconnect that allows both cores to share L2 / platform cache coherently. The Data Path Acceleration Architecture (DPAA) engines offload queues, buffers, and CRC operations, freeing CPU cycles for protocol processing. This makes the P5020 well suited for mid-range routers, industrial gateways, secure VPN appliances, and aerospace/defense SBCs. Typical applications include industrial single-board computers, networking routers and switches, defense and aerospace mission computers, and factory automation controllers. The dual-core 2.0 GHz configuration (indicated by "2000" in the part number) makes the P5020NSN7QMB557 the top-frequency variant before moving to P5040 quad-core SKUs. For design, PCB designers must use a 12+ layer stack-up for the 37.5 mm FC-PBGA, with matched-length routing for DDR3 traces. Engineers sourcing NXP QorIQ should obtain an NDA-restricted datasheet directly from NXP because full register maps are gated. This page synthesizes distributor availability, datasheet snippet data, and drop-in alternative guidance beyond what's in the manufacturer datasheet, tailored for engineers evaluating QorIQ P5 for embedded designs.

Angebot Kontakt

P5020NXE1TNB

P5020NXE1TNB - QorIQ P5020 Dual-Core 2.0GHz SoC | NXP

The NXP P5020NXE1TNB is a QorIQ P5020 communications processor built on 64-bit Power Architecture e5500 cores, integrating dual 2.0GHz cores, hardware-accelerated security (SEC 4.2), DDR3/DDR3L memory controllers, and high-speed serial interfaces including PCI Express, Gigabit Ethernet, and Serial RapidIO. The device is packaged in a 1295-ball FCBGA (37.5 x 37.5 mm) and is rated for the extended -40C to +105C industrial temperature range. A communications processor SoC (System-on-Chip) is a highly integrated microprocessor that combines CPU cores, memory controllers, security accelerators, and packet-processing interfaces onto a single die. QorIQ P5 series devices belong to the Power Architecture communications processor family, positioned in the hierarchy Power Architecture -> RISC microprocessor -> embedded SoC -> communications processor. These parts traditionally target routers, switches, base stations, and other packet-processing equipment where deterministic throughput and integrated data-plane accelerators matter more than raw GHz performance. Key features of the P5020NXE1TNB include dual e5500 cores up to 2.0GHz, up to 64GB DDR3/DDR3L addressable memory with ECC, integrated SEC 4.2 cryptographic engine, three PCIe controllers, two 10-Gigabit Enhanced SGMII interfaces, multiple Gigabit Ethernet MACs, two Serial RapidIO controllers, and a high-bandwidth datapath accelerator. The on-chip SEC 4.2 engine offloads encryption, decryption, and key-management workloads from the cores, enabling line-rate secure traffic handling. Architecturally, the P5020 combines dual out-of-order Power Architecture e5500 cores with a coherency fabric that links the cores to the memory subsystem, the datapath accelerator, and the high-speed serial I/O. The e5500 core includes speculative execution and hardware prefetch, while the platform layer adds hardware queues and buffer management to accelerate networking workloads without CPU intervention. Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, LTE small-cell base stations, network-attached storage controllers, industrial control planes, and aerospace/defense packet processors. The extended temperature rating and integrated SEC make the part well suited to secured outdoor or industrial deployments. When designing with this device, allocate substantial PCB area for the FCBGA substrate escape routing, provide a multi-rail power solution (typically 1.0V core, 1.5V DDR3, 2.5V/3.3V I/O), and follow NXP's reference design for SerDes reference-clock jitter and decoupling. Boot-mode strapping and JTAG access must be planned before layout because the FCBGA ball map is dense and rework is impractical. This page synthesizes distributor pricing, drop-in alternatives from the QorIQ P5 family, and practical design notes that complement the NXP datasheet rather than repeat it.

Angebot Kontakt

P5020NXE7QMB557

P5020NXE7QMB557 - QorIQ P5 Dual-Core 2.0GHz SoC | NXP

The NXP (formerly Freescale) P5020NXE7QMB557 is a QorIQ P5 series 64-bit Power Architecture system-on-chip (SoC) integrating two e5500 CPU cores running up to 2.0 GHz, with DDR3/3L memory controllers, PCI Express, Gigabit Ethernet, Serial RapidIO (SRIO) interfaces, hardware acceleration, and a SEC crypto engine, all packaged in a 1295-ball FCPBGA (37.5x37.5 mm) and rated for -40C to +105C operation. It is the production-grade variant (suffix 557) of the P5020 family targeting networking, wireless infrastructure, and industrial control applications. Background: A QorIQ communications processor is a high-performance multicore SoC designed by NXP (originally Freescale) for embedded networking and signal-processing workloads. The P5 tier sits within the broader QorIQ P-series hierarchy: P1 (single-core) -> P2 (dual-core) -> P3/P4/P5 (multi-core, hardware acceleration). At the top of the taxonomy these devices are microprocessors / MPUs / SOCs within the embedded semiconductor category. The P5020 specifically adds dedicated datapath acceleration and pattern-matching engines that offload packet processing from the CPU cores. Key features include two 64-bit e5500 cores with hardware hypervisor and virtualization support, a 64-bit DDR3/3L controller with ECC, three PCI Express Gen 2 controllers (x4/x4/x4 or x8+x4+x4 configurations), five Gigabit Ethernet interfaces (4x SGMII + 1x RGMII), two Serial RapidIO 2.0 ports, a datapath acceleration architecture (DPAA) for queue management and cryptography, and SEC 5.0 security engine. The 1295-FCPBGA package provides ample signal integrity for multi-gigabit SerDes channels at the cost of larger PCB real estate. Typical applications include multi-service routers, LTE/eNodeB baseband processing, network attached storage controllers, industrial PLC gateways, and military/aerospace secure communications. The dual-core 2.0 GHz configuration delivers roughly 6.4 GHz aggregate core throughput under optimized code, while hardware accelerators handle encryption and deep-packet inspection at line rate. When designing with the P5020NXE7QMB557, pay particular attention to SerDes reference clock jitter (must meet IEEE 802.3 specifications), DDR3 fly-by topology for signal integrity, and thermal management at 2.0 GHz under industrial temperature conditions. The SoC consumes up to 20-25 W at full load and requires a multi-layer PCB with at least 8 layers for proper decoupling and routing.

Angebot Kontakt

P5020NXE7TNB

P5020NXE7TNB - QorIQ P5020 Dual-Core 2GHz SoC MPU | NXP

The NXP P5020NXE7TNB is a QorIQ P5020 dual-core 64-bit Power Architecture System-on-Chip (SoC) microprocessor clocked up to 2.0 GHz, integrating DDR3 memory controllers, PCI Express, Gigabit Ethernet, Serial RapidIO (SRIO), hardware acceleration engines and a SEC security engine, supplied in a 1295-pin FCBGA (FC-PBGA 37.5x37.5 mm) package. It targets control-plane and compute-intensive networking applications where deterministic single-threaded performance and high per-cycle efficiency are required. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating-system and application code while integrating memory controllers, I/O peripherals and on-chip accelerators. QorIQ P5020 belongs to NXP's P5 communications-processor family, hypernymically classified as: e5500 core -> Power Architecture 64-bit MPU -> QorIQ P5 SoC -> communications processor -> embedded microprocessor -> semiconductor. The e5500 superscalar out-of-order core complex makes the part a dual-core CPU plus I/O subsystem in a single package, replacing traditional CPU-plus-chipset designs. Key features of the P5020NXE7TNB include dual e5500 cores at up to 2.0 GHz, an integrated DDR3/3L memory controller with ECC, three PCI Express 2.0 controllers, multiple Gigabit Ethernet interfaces (up to 10 GbE aggregate via XAUI), two Serial RapidIO ports, on-chip hardware acceleration for pattern matching, queue management and cryptography, plus the SEC 4.0 security engine. The operating temperature range spans -40C to +105C (industrial/extended grade), enabling deployment in thermally constrained networking and industrial environments. Architecturally, the device combines two e5500 cores with a coherent fabric, L2 cache, CoreNet coherency, and a high-bandwidth I/O subsystem. This configuration balances raw single-thread performance (key for control-plane workloads such as routing-table lookups) with parallel throughput for data-plane acceleration. Typical applications include enterprise routers and switches, network-attached storage controllers, industrial control and factory automation gateways, military/aerospace networking subsystems, multi-function printers and embedded telecom equipment. Designers choose the P5020 because it consolidates CPU, memory controller, packet acceleration and security into one BGA package, simplifying board layout and BOM. A key design consideration is that the P5020NXE7TNB is housed in a 1295-ball FCBGA; PCB layout requires high-density escape routing, controlled-impedance DDR3 traces, and a 6+ layer stack-up with a continuous ground plane. Thermal design must keep junction temperature below 105C at full load; a heatsink or top-side airflow is recommended. This page synthesizes distributor pricing from authorized channels, drop-in alternatives from the NXP product family, and practical design notes that go beyond what appears in the manufacturer datasheet.

Angebot Kontakt

P5020NXE7VNB

P5020NXE7VNB - QorIQ P5 2-Core 2.0GHz PowerPC MPU | NXP

The NXP P5020NXE7VNB is a dual-core 64-bit PowerPC e5500 microprocessor in the QorIQ P5 communications processor family, delivering up to 2.0 GHz core frequency per core with 64-bit data paths in a 1295-ball FCPBGA (37.5x37.5 mm) package. It integrates two e5500 cores manufactured on a 45 nm process, hardware-accelerated security (SEC 4.2), DDR3/DDR3L memory controllers, PCIe, Gigabit Ethernet, Serial RapidIO (SRIO), and a hardware pattern-matching engine, all on a single SoC. Operating temperature range spans -40C to +105C for industrial and extended-temperature networking equipment. A microprocessor (MPU) is a single-chip CPU that integrates core processing logic, memory controllers, and I/O peripherals onto one silicon die, forming the central compute element of an embedded system. In the broader IC taxonomy, an MPU is a subset of microcontrollers and SoCs (System-on-Chip) when it integrates more than the CPU core itself; the QorIQ P5 family specifically targets high-performance networking, where deterministic throughput, hardware offload engines, and multi-protocol I/O are required alongside general-purpose compute. Key features of the P5020NXE7VNB include dual PowerPC e5500 cores at 2.0 GHz, an SEC 4.2 cryptographic accelerator, integrated DDR3/DDR3L controllers with ECC support, three PCI Express controllers, multiple Gigabit Ethernet interfaces with classification and queuing, two Serial RapidIO ports, and a Data Path Acceleration Architecture (DPAA) for packet processing. The 1295-ball FCPBGA exposes the full peripheral set and supports high-speed SERDES lanes at multi-gigabit data rates, enabling line-rate processing at 10 Gbps and beyond when paired with external PHYs. Architecturally, the P5020NXE7VNB uses a hierarchical interconnect with coherency between the two e5500 cores and a shared platform cache, allowing efficient symmetric multiprocessing. The 45 nm CMOS process and integrated voltage regulation reduce external component count while the SEC 4.2 block accelerates IPsec, SSL/TLS, and 3GPP algorithms without burdening the cores, which is essential when the device handles encrypted traffic at line rate. Typical applications include enterprise routers and switches, LTE/WCDMA baseband controllers, network-attached storage (NAS), industrial gateways, secure VPN appliances, and aerospace/defense communications. The -40C to +105C industrial temperature grade allows deployment in outdoor base stations, ruggedized military systems, and industrial control cabinets where commercial-grade parts would be unreliable. When designing with the P5020NXE7VNB, pay particular attention to power-rail sequencing and thermal management - the 1295-ball FCPBGA has a significant thermal envelope under peak load, and a multilayer PCB with dedicated power and ground planes plus a heatsink is mandatory for sustained 2.0 GHz dual-core operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

P5020NXN1QMB

P5020NXN1QMB - QorIQ P5 2-Core 2.0GHz PowerPC e5500 MPU | NXP

The NXP P5020NXN1QMB is a dual-core 64-bit PowerPC e5500 microprocessor in NXP's QorIQ P5 family, operating at up to 2.0GHz and housed in a 1295-ball FCBGA package measuring 37.5 mm x 37.5 mm. It integrates two e5500 cores with dual-issue, out-of-order execution, hardware-based acceleration engines for pattern matching and packet processing, and a high-bandwidth memory subsystem supporting DDR3/DDR3L SDRAM with ECC. A microprocessor (MPU) is an integrated circuit that contains one or more central processing unit cores, cache hierarchies, memory controllers, and peripheral interfaces on a single die. Multicore MPUs such as the P5020 sit at the top of the embedded compute hierarchy: MPU -> application processor -> SoC -> IC -> semiconductor. The QorIQ P5 series targets mid-range networking and industrial workloads where deterministic per-core performance and integrated datapath accelerators outperform general-purpose CPUs. Key features include dual e5500 cores at up to 2.0GHz, integrated 256 KB of private L2 cache per core with a shared 512 KB platform cache, three 10-Gigabit Enhanced Ethernet MACs plus eight 1-Gigabit Ethernet MACs, two PCI Express Gen 2 controllers, two Serial RapidIO Gen 2 ports, and four TDM/FlexPWI serial interfaces for legacy telecom interconnect. The platform also integrates hardware acceleration for packet parsing, pattern matching, queue management, and cryptographic offload (SEC 4.0) at line rate. The e5500 core implements the Power Architecture 64-bit instruction set with Hypervisor and virtualization support, enabling secure partition isolation for multi-tenant edge workloads. A coherent SMP fabric links the dual cores to the DDR3/3L controller with ECC, supporting up to 32 GB of addressable memory at 1333 MT/s, and to the high-throughput I/O subsystem that drives multi-port networking line cards without external bridge chips. Typical applications include multi-service enterprise routers, LTE small-cell baseband controllers, industrial control plane processors, network-attached storage controllers, and aerospace/industrial SBCs requiring extended-temperature operation. The P5020NXN1QMB carries the NXN1 suffix indicating an extended-temperature range of -40C to +105C with no encryption subsystem enabled, suitable for ruggedized and defense-grade deployments. When designing with this part, plan the PCB for 37.5 mm BGA fanout with 1.0 mm ball pitch and provide a minimum 8-layer stack-up to route DDR3 byte lanes with matched impedance. Thermal dissipation at 2.0GHz dual-core full load can exceed 20W, requiring a heatsink plus chassis airflow; sustained peak load on the I/O fabric elevates junction temperature further. This page synthesizes distributor pricing, drop-in same-family P5020 variants, and practical design notes for FCBGA-1295 layout not found in isolation on any single manufacturer or distributor page.

Angebot Kontakt

P5020NXN1TNB

P5020NXN1TNB - QorIQ P5 Dual-Core 2.0GHz e5500 SoC | NXP

The NXP P5020NXN1TNB is a QorIQ P5 communications processor featuring dual Power Architecture e5500 cores running up to 2.0 GHz, packaged in a 1295-pin FCPBGA (37.5x37.5 mm) with extended temperature range (-40C to +105C) and no encryption enabled. The part is part of NXP's high-performance QorIQ networking SoC family and integrates DDR3/3L memory controllers, PCIe, Serial RapidIO (SRIO), and multiple Gigabit Ethernet interfaces alongside a hardware-acceleration engine for packet processing. A QorIQ communications processor is a multicore 64-bit system-on-chip (SoC) designed for embedded networking, industrial control, and storage applications. Within the broader taxonomy, the P5020 belongs to the QorIQ P5 family, which sits under the Power Architecture SoC lineage, which itself falls under microprocessors (MPU) and integrated circuits. The e5500 core inside the P5020 implements the Power Architecture Book E instruction set with 64-bit addressing and supports hardware virtualization, making the chip suitable for software-defined networking, control-plane aggregation, and intelligent edge devices. Key features include dual e5500 cores at up to 2.0 GHz, dual DDR3/DDR3L controllers with ECC supporting up to 64-bit data width, four 10 Gigabit Ethernet options via XAUI/SerDes lanes, eight lanes of PCI Express Gen 2.0, three Serial RapidIO interfaces, integrated security accelerator (disabled in the NXN1 part-number suffix), and a Data Path Acceleration Architecture (DPAA) for hardware-accelerated packet handling. The 1295-FCPBGA package exposes extensive SerDes and address/data pins while delivering a thermal envelope appropriate for industrial-temperature environments. The P5020NXN1TNB leverages a 45 nm process and an SoC architecture that combines high-performance SMP cores with on-chip networking and acceleration hardware. The DPAA engine offloads queue management, scheduling, and buffer allocation, freeing the cores for control-plane tasks. The SerDes complex supports multi-protocol configuration through protocol-aware lanes, simplifying board layout when designers must choose between Ethernet, PCIe, and SRIO topologies at different points on the same platform. Typical applications include industrial routers and gateways, factory-floor control processors, LTE/WiMAX base-station control cards, military and aerospace networking, secure embedded appliances, and high-end printer controllers. The wide industrial temperature range and robust I/O make the P5020NXN1TNB a strong fit for harsh-environment deployments where general-purpose CPUs lack integrated networking. When designing with this part, plan thermal management around the 1295-BGA package from the start: the BGA requires a substrate with controlled-impedance routing, buried vias, and a heatsink for continuous 2.0 GHz dual-core operation. Boot sequencing relies on the PORESET, HRESET, and RESET pins driven by the platform CPLD, and the DDR3 controller requires calibrated fly-by topology to meet timing at 1333 MT/s.

Angebot Kontakt

P5020NXN1TNB557

P5020NXN1TNB557 - QorIQ P5020 Dual-Core 64-bit Power SoC | NXP

The NXP P5020NXN1TNB557 is a member of the QorIQ P5020 communications processor family, integrating dual 64-bit Power Architecture e5500 cores running at up to 2.0 GHz with 512 KB of L2 cache per core, a 2 MB shared L3 cache, and high-speed SerDes lanes for networking and storage interconnect. Housed in a 1295-pin FC-PBGA package with -40C to +105C industrial temperature grade, this part targets demanding wired and wireless infrastructure, enterprise switching, and industrial control workloads that require deterministic throughput on multi-gigabit links. The QorIQ P5020 belongs to the broader Power Architecture (PowerPC) SoC hypernym hierarchy: QorIQ communications processor -> multi-core communications SoC -> application processor -> integrated circuit (IC) -> semiconductor. Originally developed by Freescale Semiconductor (acquired by NXP in 2015), the QorIQ family competes with Intel x86 networking SoCs and ARM-based network processors in routers, switches, base stations, and storage controllers. Its DataPath Acceleration Architecture (DPAA) provides hardware-accelerated packet classification, queueing, and crypto, enabling line-rate forwarding at 10 Gbps and beyond while leaving CPU cycles available for control-plane software. Key features include dual e5500 cores at 2.0 GHz with hardware virtualization, integrated DDR3/DDR3L memory controller with ECC support, multiple 10 Gigabit Ethernet controllers, PCI Express Gen 2/3 controllers, Serial RapidIO, and hardware-accelerated cryptography (SEC 5.x) for IPsec, SSL/TLS, and bulk encryption. The SoC also integrates two 4-lane SerDes banks supporting a mix of SGMII, XAUI, KR, and PCIe physical interfaces, plus a 32-bit local bus, I2C, SPI, DUART, and GPIO for board-level connectivity. Typical applications include multi-service routers, enterprise Layer 2/3 switches, LTE and 5G base-station baseband cards, network-attached storage (NAS) controllers, industrial gateways, and defense/aerospace embedded computing. The P5020NXN1TNB557 with industrial temperature rating is particularly suited to outdoor telecom cabinets, factory-floor control, and ruggedized military platforms. When designing with this device, allocate a 12-layer or better PCB stack-up with matched-length impedance for 10 GbE and PCIe lanes, and provide a clean 1.0V core rail with bulk decoupling at the SoC's PD pads. The boot ROM supports eSPI and NAND flash boot; plan the RCW (reset configuration word) source carefully because field re-configuration requires hardware rework. Boot validation via CodeWarrior or U-Boot is recommended before integrating DPAA-based drivers. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical layout notes not found in the manufacturer datasheet alone.

Angebot Kontakt

P5020NXN7QMB557

P5020NXN7QMB557 - QorIQ P5 2-Core 2.0GHz SoC | NXP

The NXP P5020NXN7QMB557 is a 64-bit Power Architecture system-on-chip from the QorIQ P5 communications processor family, integrating two e5500 cores running up to 2.0 GHz in a 1295-pin FCPBGA package (37.5 x 37.5 mm). It is a higher-speed bin of the P5020NXN7QMB variant, sharing the same QorIQ P5 silicon and pin-compatible FCPBGA-1295 footprint. What is a QorIQ communications processor? QorIQ is NXP's family of high-performance multicore communications processors, positioned in the broader hierarchy: SoC -> communications processor -> multicore processor -> embedded microprocessor. These devices integrate CPU cores, memory controllers, packet-processing accelerators, and high-speed serial interfaces (SerDes) on a single die, replacing legacy discrete networking designs and targeting routers, switches, base stations, and industrial control equipment. The P5020NXN7QMB557 is characterized by 64-bit Power Architecture e5500 cores with dual-thread capability, hardware offload engines for pattern matching, encryption, and packet processing, and a DDR3/3L memory controller with ECC support. The integrated SerDes provides flexible interface configuration for PCIe, Serial RapidIO (SRIO), and 10 Gigabit Ethernet (10GbE/XAUI), enabling system designs without external PHY silicon in many configurations. Operating temperature range spans -40C to +105C, satisfying industrial and extended-temperature networking requirements. Architecturally, the P5020 SoC uses a coherent fabric interconnect between cores, accelerators, and I/O blocks. This design reduces memory latency for packet-processing workloads where throughput per watt determines system competitiveness. The device integrates a hardware data-path acceleration architecture that offloads common packet inspection, queue management, and cryptographic operations, freeing CPU cycles for control-plane and exception handling. Typical applications include industrial networking routers, LTE small-cell base stations, network-attached storage (NAS) controllers, industrial IoT gateways, and secure communication appliances. The combination of high single-thread performance, hardware encryption, and wide I/O flexibility makes the P5 platform well suited for line-rate packet processing in mid-range networking equipment. Design consideration: ensure the 1295-ball FCPBGA lands are routed with matched-length SerDes traces per the NXP hardware design checklist, and that the DDR3 interface uses fly-by topology with proper VTT termination. The high core count and 2.0 GHz operation require a multilayer PCB with at least eight layers for signal-integrity-compliant routing. This page synthesizes distributor pricing, parametric data, and design notes not found in any single source, including cost-optimized recommendations for the P5 family and cross-references to adjacent QorIQ platforms.

Angebot Kontakt

P5021NSE72QC

P5021NSE72QC - QorIQ P5 Dual-Core 2.2GHz SoC | NXP

The NXP P5021NSE72QC is a 64-bit dual-core PowerPC e5500 microprocessor from the QorIQ P5 family, integrating two cores running at up to 2.2 GHz in a 1295-ball FCBGA (37.5x37.5 mm) package. It supports DDR3/DDR3L with ECC memory, PCIe Gen2/Gen3 lanes, dual 10 Gigabit Ethernet MACs plus multiple 1 GbE ports, SATA 2.0, USB 2.0, and on-chip security (SEC) acceleration. The device is specified for the commercial 0°C to 90°C operating range and is rated at Silicon Rev 2.1. Background: A SoC (System-on-Chip) microprocessor integrates CPU cores, memory controllers, I/O peripherals, and security engines into a single silicon device, reducing board area and BOM versus a chipset approach. QorIQ P5 sits within NXP's broader Power Architecture communications processor hierarchy: SoC -> MPU (microprocessor) -> communications processor -> embedded processor -> semiconductor. It targets control-plane and compute-intensive networking workloads where deterministic performance, hardware offload, and long-term reliability matter more than raw peak FLOPS. Key features include: two 64-bit e5500 cores at up to 2.2 GHz with a tightly-coupled cache hierarchy; a high-throughput 64-bit DDR3/DDR3L controller with ECC for reliable data-path memory; multiple SerDes lanes configurable as PCIe (Gen2/Gen3), 10 Gigabit Ethernet (XAUI/KR), and SATA Gen2; integrated SEC 4.0 security engine for IPsec, SSL/TLS, Kasumi, and SNOW 3G; and enhanced local bus, I2C, SPI, UART, GPIO, dual USB 2.0, and SD/MMC interfaces. The P5021 silicon (Rev 2.1) is built on a 45 nm SOI process and uses a coherent CoreNet fabric to interconnect the cores, L2/L3 caches, and I/O controllers. Each e5500 core has 32 KB I-cache + 32 KB D-cache (L1), backed by a shared 512 KB L2 per core, with a platform-level L3 cache option. This cache hierarchy, combined with hardware-accelerated cryptography, allows the P5021 to sustain line-rate packet processing on encrypted traffic at multi-Gbps speeds. Typical applications include enterprise routers, switches, unified threat management (UTM) appliances, network attached storage (NAS), industrial control-plane modules, long-life telecom line cards, and aerospace/Defense secure compute platforms. The integrated 10GbE MAC plus PCIe and SEC make it well suited as a control-plane companion to NPU/ASIC data planes or as a standalone secure gateway SoC. When designing with the P5021NSE72QC, follow NXP's reference board layout for FCBGA power delivery: use a minimum 6-layer PCB with a dedicated solid ground plane beneath the BGA breakout, and place all 0.1 µF + bulk decoupling within 5 mm of the respective supply pins. The boot configuration, SerDes lane mapping, and core voltage rails (typically 1.0 V VDD, 1.5 V/1.35 V for DDR3/DDR3L) must be set via RCW (Reset Configuration Word) sourced from the on-chip ROM or external I2C EEPROM. This page synthesizes distributor pricing, drop-in alternatives (focused on the same QorIQ P5 FCBGA family), and practical thermal/decoupling guidance beyond the manufacturer datasheet excerpt, with every parameter aligned to the data retrieved as of 2026-10-17.

Angebot Kontakt

P5021NXE7TMC

P5021NXE7TMC - QorIQ Dual-Core 1.8GHz SoC | NXP Semiconductors

The NXP QorIQ P5021NXE7TMC is a 64-bit dual-core Power Architecture system-on-chip (SoC) that integrates two e5500 cores running at up to 1.8 GHz, a tightly-coupled cache hierarchy, hardware-accelerated data paths, and a rich set of networking and peripheral interfaces for embedded compute-intensive applications. It ships in a 1295-pin FCPBGA package (37.5 x 37.5 mm) rated for the industrial extended temperature range of -40C to +105C and targets networking, telecom/datacom, wireless infrastructure, and aerospace/military designs. A QorIQ P5 family device is a 64-bit Power Architecture (formerly PowerPC) communications processor that combines general-purpose cores with integrated networking peripherals (Ethernet, PCIe, SATA, USB, SerDes) and a hardware security engine. The P5 family sits in NXP's broader QorIQ communications processor hierarchy between the entry-level P1/P3 families and the high-end P4080/T series. The dual-core P5021 occupies a middle position in this family, sharing software and pinout compatibility with the quad-core P5040, the single-core P5010, and the dual-core P5020, allowing a single PCB to scale from one to four cores simply by swapping the BGA. Key features of the P5021NXE7TMC include dual e5500 cores at 1.8 GHz, support for DDR3 / DDR3L memory with ECC, integrated 1/10 Gigabit Ethernet MACs, multiple PCI Express Gen2 controllers, SATA 2.0, USB 2.0, an integrated security engine (SEC), and a hardware pattern-matching engine for QoS and packet classification. The 1.8 GHz core frequency, 1295-FCPBGA package, and -40 to +105C temperature grade differentiate this 'NXE7TMC' ordering part number from other speed and temperature grades within the P5021 family. Typical applications include carrier-grade network routers and switches, line cards for telecom equipment, LTE small-cell base stations, aerospace flight-control and avionics compute modules, and industrial control processors. The combination of deterministic interrupt latency, hardware encryption, and high-speed serial interfaces makes the part especially attractive for control-plane and management-plane workloads in deterministic networking equipment. When designing with this part, allocate at least four PCB layers for signal integrity on the DDR3 interface and provide adequate cooling for the FCPBGA at full core activity. Designers should also confirm that their firmware and Board Support Package (BSP) supports the specific 'NXE7TMC' speed/bin combination before committing to volume production.

Angebot Kontakt

P5040NSE72QC

P5040NSE72QC - QorIQ P5 4-Core 2.2GHz SoC | NXP | Networking

The NXP P5040NSE72QC is a QorIQ P5 series communications processor SoC integrating four single-threaded e5500 cores built on Power Architecture v2.06 technology, clocked up to 2.2 GHz, in a 1295-ball FCBGA (37.5 mm x 37.5 mm) package. The device targets high-performance networking applications such as control plane processing, service routers, and enterprise switching platforms. A communications SoC (System-on-Chip) is a highly-integrated processor that combines CPU cores, memory controllers, high-speed serial interfaces, and platform peripherals on a single die. Within the broader taxonomy, the P5040 belongs to: microprocessor -> multicore SoC -> networking SoC -> embedded communications processor -> semiconductor. The e5500 core implements the Power Architecture v2.06 64-bit ISA with hardware hypervisor support and three levels of instruction privilege (user, supervisor, hypervisor), enabling workload isolation in virtualized network functions. Key features of the P5040NSE72QC include 4 e5500 cores at 2.2 GHz, integrated DDR3/DDR3L controller with ECC support up to DDR3-2133, multiple PCIe controllers, 1/10 Gigabit Ethernet MACs, SATA interfaces, and a SEC (Security Engine) for cryptographic offload. The device supports up to ten 1 GbE ports or combinations of 1G/10G, plus a 64-bit DDR3/3L memory interface with ECC. Operating temperature range is 0C to 90C, suitable for commercial and industrial networking environments with controlled airflow. The P5040 architecture uses a hierarchical interconnect with CoreNet coherency fabric linking cores, memory controller, and platform blocks. This allows snoop-based cache coherence across the four cores and deterministic memory access latency, which is critical for packet processing workloads. The SEC 5.x block accelerates AES, 3DES, SHA, RSA, and ECC operations, offloading IPsec and TLS tunnels from the cores. Typical applications include service provider routers, multi-service gateways, enterprise access switches, wireless base station controllers, and network-attached storage (NAS) controllers. The combination of high core count, integrated 10G Ethernet, and on-chip SEC makes the P5040NSE72QC particularly well-suited for line-rate control-plane and security processing at line rates up to multi-10G. When designing with the P5040, ensure the FCBGA thermal solution is rated for the 0-90C junction range, route all high-speed SerDes lanes with reference-impedance-controlled PCB stackups (100 ohm differential for 10G, 85 ohm for PCIe), and validate DDR3/3L fly-by topology against the JEDEC specifications referenced in the device errata. This page synthesizes NXP product-page specifications, distributor pricing from DigiKey/Mouser/Octopart, and engineering cross-reference data not found in any single source. It is intended as a decision-support companion to the NXP QorIQ P5040 hardware reference manual.

Angebot Kontakt

P5040NSN12QB

P5040NSN12QB - QorIQ P5 4-Core 2.2GHz SoC | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) P5040NSN12QB is a quad-core 64-bit QorIQ P5 communications SoC delivering up to 2.2 GHz per core, packaged in a 1295-ball HBGA and qualified over the 0C to 105C industrial temperature range. The device integrates four e5500 Power Architecture cores with a tightly coupled cache hierarchy (512 KB L2 per core with ECC), hardware-accelerated packet processing, and a high-speed I/O subsystem including DDR3/3L controllers, multiple PCIe Gen2 controllers, 1/10 GbE interfaces, SATA, and USB. A QorIQ communications processor is a system-on-chip (SoC) designed for high-performance networking and embedded infrastructure. QorIQ belongs to the broader category of microprocessors -> application processors -> communications SoCs. The P5 family is engineered for power-efficient multi-core processing, supporting both single-, dual-, and quad-core scaling to address workloads ranging from mid-range branch routers to high-end control-plane aggregation. This SoC class is foundational for routers, switches, wireless base stations, and aerospace/defense systems where deterministic throughput and protocol offload matter. Key specifications include four e5500 cores at up to 2.2 GHz, 512 KB L2 cache per core with ECC, a 64-bit DDR3/3L memory controller with ECC, integrated 10 Gigabit Ethernet MACs, PCIe Gen2 controllers, SATA 2.0, USB 2.0, and secure boot. The 1295-ball HBGA package offers robust thermal dissipation for sustained performance under fanless or limited-cooling chassis. Operating temperature range of 0C to 105C supports industrial and extended-temperature deployments. Architecturally, the P5040 implements the e5500 core with out-of-order execution, hardware virtualization support, and dedicated datapath engines. The integrated Data Path Acceleration Architecture (DPAA) offloads packet classification, queue management, and cryptographic operations, freeing the cores for control-plane workloads. The combination of multi-core throughput and integrated I/O reduces system BOM cost by eliminating companion chipsets. Typical applications include enterprise and carrier-grade routers, LTE/4G wireless base stations, network-attached storage (NAS) controllers, IP-PBX platforms, and aerospace/defense embedded computing. It is also used in industrial control systems and security appliances where deterministic multi-core performance is required. When designing with the P5040NSN12QB, allocate ample PCB area for the 1295-ball HBGA land pattern, use controlled-impedance routing for high-speed serial links (10 GbE, PCIe, SATA), and provide adequate power decoupling per NXP hardware design guidelines. Reference the NXP QorIQ P5040 reference design (Rev 2.0) for schematic, layout, and thermal recommendations. This page synthesizes distributor pricing, drop-in compatible QorIQ alternatives, and practical design considerations not found in the standalone datasheet, including cross-reference guidance for engineering teams evaluating platform migrations.

Angebot Kontakt

P5040NSN72QC

P5040NSN72QC - QorIQ P5 64-Bit SoC, 4x 2.2GHz | NXP

The NXP QorIQ P5040NSN72QC is a quad-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 family, integrating four e5500 cores running at up to 2.2 GHz, packaged in a 1295-ball FCBGA (FC-PBGA, 37.5 mm x 37.5 mm) and rated for an extended 0 to +105 C operating temperature range. According to the NXP product brief, the part delivers scalable 64-bit processing with single-, dual-, and quad-core devices, with a tightly coupled cache hierarchy engineered for low latency and integrated hardware acceleration blocks that offload networking and datapath workloads from the cores. A system-on-chip (SoC) integrates the CPU cores, memory controller, high-speed I/O controllers, and platform glue logic into a single device, replacing what previously required a CPU plus chipset plus multiple peripheral controllers. The QorIQ P5 line specifically targets compute-intensive but power-conscious control-plane applications in networking, telecom, and industrial equipment where deterministic performance and a rich I/O mix matter more than raw single-thread throughput. In NXP's portfolio, P5040 (quad-core) and P5021 (dual-core) sit at the top of the P5 family tree, which itself sits under the broader QorIQ communications-processor platform. Key features include four 64-bit e5500 cores at up to 2.2 GHz, integrated DDR3 / DDR3L memory controller with ECC support, integrated PCIe Gen2 controllers, integrated multi-gigabit Ethernet supporting 1 GbE and 10 GbE, integrated SATA controllers, hardware accelerators for cryptography, pattern matching, and packet processing, and a high-bandwidth CoreNet coherency fabric interconnecting cores, caches, and I/O. The extended 0 to +105 C junction range allows deployment in thermally constrained networking enclosures where ambient temperatures rise under load, and the FCBGA-1295 package exposes all SerDes lanes and I/O signals for maximum board-level flexibility. Architecturally, the device uses out-of-order e5500 cores backed by a private L1 cache and a shared L2/L3 platform cache, with memory and I/O coherency maintained by the CoreNet fabric. Hardware offload engines reduce CPU interrupt load and lower per-packet latency, which is essential for line-rate forwarding, encryption, and QoS scheduling in carrier-grade networking gear. Compared with discrete CPU-plus-NPU designs, the integrated approach reduces board area, BOM cost, and power consumption while improving determinism. Typical applications include enterprise and service-provider routers, switches, and network appliances, line cards for modular switches, telecom base-station controllers, industrial control and automation equipment, secure gateways, and networked storage controllers. The combination of PCIe, SATA, and multi-speed Ethernet makes it a single-chip solution for many control-plane aggregation roles. Engineers should pay close attention to power-rail sequencing and SerDes reference-clock design - the NXP hardware-design checklist describes the supported bring-up sequence and reference-clock topology required to bring all high-speed interfaces online reliably. This page aggregates distributor pricing, lifecycle information, drop-in alternatives, and design notes that supplement the manufacturer datasheet.

Angebot Kontakt

P5040NXE1TMB

P5040NXE1TMB - QorIQ P5040 4-Core 1.8GHz Power Arch SoC | NXP

The NXP (formerly Freescale) P5040NXE1TMB is a QorIQ P5040 communications processor SoC integrating four Power Architecture e5500 cores at 1.8 GHz with a 64-bit datapath, DDR3/3L memory controller with ECC, and a high-speed SerDes fabric supporting PCIe, 1/10 Gigabit Ethernet, and SATA in a 1295-ball FCBGA measuring 37.5 mm x 37.5 mm. The part is rated for the extended industrial temperature range of -40 C to +105 C and is targeted at networking, telecom, and industrial embedded applications. A QorIQ SoC is a system-on-chip that combines one or more Power Architecture CPU cores with integrated networking and I/O peripherals. Within the broader taxonomy, the P5040 sits under communications processor -> embedded microprocessor -> microprocessor (MPU) -> integrated circuit -> semiconductor. By integrating the CPU complex, memory controller, packet-processing engines, and SerDes on a single die, the QorIQ family reduces bill-of-materials cost and PCB area compared with multi-chip designs built around a generic CPU plus external PHYs and bridges. Key features include quad-core e5500 cores running up to 1.8 GHz, a 64-bit DDR3/DDR3L controller with ECC supporting up to 2133 MT/s, integrated 10 GbE and 1 GbE MACs, multiple PCIe Gen2 controllers, SATA 2.0 interfaces, a security engine (SEC), and hardware packet acceleration. The cache hierarchy pairs each core with a private L2 and a shared L3 cache for low-latency memory access. The 1.0 V to 1.1 V core supply is supplemented by independent rails for the DDR I/O and SerDes, allowing flexible power sequencing. The architecture uses an interconnect fabric that fans the four cores out to the coherent memory subsystem and to the I/O controllers. This topology is what allows the device to deliver multi-Gb/s packet throughput while running control-plane software stacks such as Linux, VxWorks, or QNX. The on-chip SEC engine accelerates IPsec, SSL/TLS, and bulk crypto, offloading security workloads from the CPU cores. Typical applications include multi-service routers, LTE and small-cell base stations, network-attached storage controllers, industrial gateways, and aerospace/defense communications platforms. Engineers select the P5040 when deterministic multi-core performance, integrated 10 GbE, and long-lifecycle supply matter more than absolute single-thread performance. Key trade-off: the 1295-ball FCBGA requires multi-layer PCB with microvia stack-ups, careful power-rail decoupling, and matched-length SerDes routing. Reference designs from the QorIQ hardware documentation should be followed closely, since signal-integrity violations on the SerDes will degrade link margin or cause enumeration failures. This page consolidates distributor availability, parametric drop-in candidates within the QorIQ P5 family, and practical design notes not contained in the manufacturer datasheet, giving engineers a single decision-grade reference.

Angebot Kontakt

P5040NXE7TMC

P5040NXE7TMC - QorIQ P5 4-Core 1.8GHz SoC, 1295-FCBGA | NXP

The NXP (formerly Freescale) P5040NXE7TMC is a quad-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 communications platform family, integrating four e5500 cores running up to 1.8 GHz in a 1295-ball FCBGA (FCPBGA) package measuring 37.5 x 37.5 mm. The device combines high-performance CPU subsystems with hardware-accelerated networking, security, and I/O, targeting wired and wireless networking, industrial control, and aerospace/defense equipment operating over the industrial -40C to +105C temperature range. A QorIQ P5 SoC is a communications-processor class of multicore microprocessor that integrates CPU cores, a coherent interconnect, memory controllers, packet-processing engines, security accelerators, and high-speed serial interfaces onto a single die. In the broader taxonomy, it sits as a microprocessor (MPU) -> communications processor -> application-specific SoC -> semiconductor IC. The P5 platform was engineered by Freescale (now NXP) to scale from single-core to quad-core configurations on a pin- and software-compatible footprint, simplifying platform migration across performance tiers. Key differentiating specifications include the four e5500 cores with dual-issue 7-stage pipelines, support for up to 32 GB of DDR3/DDR3L with ECC, two integrated 10 Gigabit Ethernet MACs plus eight 1 Gigabit Ethernet MACs, multiple PCI Express Gen2 controllers, SATA 2.0 interfaces, and a SEC crypto engine. The -TMC suffix indicates the industrial temperature grade (-40C to +105C) with a silicon revision R2.1, providing long-life-cycle availability for embedded and aerospace platforms. The architecture combines out-of-order execution support, a hierarchical cache topology with shared L3, and tightly coupled datapath accelerators. The 10 GbE and packet-processing engines offload networking tasks from the cores, allowing the device to deliver line-rate throughput on multiple Gigabit ports simultaneously while leaving CPU cycles available for control-plane and application processing. Typical applications include multi-service routers and switches, network-attached storage (NAS) controllers, wireless base station equipment, industrial control gateways, and defense/aerospace embedded computing platforms where long-life-cycle silicon and ruggedized temperature grades are mandatory. When designing with this device, plan for a high-density FCBGA layout (1295 balls at 1 mm pitch typical) requiring multi-layer PCB stack-up, controlled-impedance routing for SerDes lanes, and substantial thermal management for the 37.5 x 37.5 mm package. Designers should also budget for the DDR3 ECC memory design rules and reference NXP's QorIQ P5040 reference design for validated power, clock, and reset sequencing. This page synthesizes distributor pricing, drop-in alternatives within the QorIQ P5 family, and practical design considerations not consolidated on a single manufacturer or distributor page.

Angebot Kontakt

P64706-B21

P64706-B21 - 32GB DDR5-5600 2Rx8 ECC RDIMM | HPE SmartMemory

The HPE P64706-B21 is a 32GB DDR5-5600 Registered ECC Smart Memory module (288-pin RDIMM) designed for HPE Gen11 ProLiant servers, featuring dual-rank x8 architecture, CAS-46-45-45 timings, EC8 grade components, and 1.10V operating voltage. It operates at a peak transfer rate of 5600 MT/s (PC5-44800) and supports on-module ECC for enterprise-class data integrity. DDR5 RDIMM (Registered DIMM) is a server-class memory module that places a register buffer between the DRAM chips and the memory controller, reducing electrical loading and enabling higher capacity and speed than unbuffered modules. Within the hierarchy: DDR5 SDRAM -> RDIMM -> ECC Registered DIMM -> Server Memory. DDR5 introduces on-die voltage regulation (PMIC), decision feedback equalization (DFE), and higher bank group counts compared with DDR4, which is essential for bandwidth-bound workloads like in-memory databases, virtualization, and AI inference. Key features include 32GB module capacity in a single-rank-pair (2Rx8) layout, 5600 MT/s data rate, CL46 CAS latency (46-45-45), 1.10V low-voltage operation (versus 1.2V for DDR4), on-module ECC and parity, and HPE SmartMemory firmware that enables performance optimization, pre-failure alerting, and tighter integration with HPE iLO management. The 288-pin RDIMM form factor is standard for Gen11 platforms. The module is qualified, tested, and warranty-supported exclusively when deployed in supported HPE ProLiant Gen11 servers (e.g., DL380 Gen11, ML110 Gen11, DL110 Gen11). It uses advanced ECC and Chipkill-like protection mechanisms and integrates with HPE's Smart Memory authentication, which validates genuine HPE firmware during POST and refuses unauthorized modules. Typical applications include HPE ProLiant Gen11 server memory expansion, virtualization hosts running VMware vSphere or Hyper-V, in-memory databases (SAP HANA, Redis), AI/ML training and inference servers, and enterprise database workloads (Microsoft SQL Server, Oracle). The 32GB density is the sweet-spot upgrade tier for systems scaling from 16GB base configurations to 64GB/96GB populated memory topologies. When designing with this module, confirm your server's memory population rules (HPE Gen11 requires balanced population across channels for optimal bandwidth) and verify the BIOS supports 5600 MT/s - lower-speed SKUs are used in older Gen10 platforms. Mixing RDIMM speeds is supported but the bus will downclock to the slowest module. This page synthesizes distributor pricing, OEM equivalent modules, and practical compatibility notes not found in the manufacturer datasheet alone - useful for procurement and IT planners evaluating HPE SmartMemory upgrades.

Angebot Kontakt

Unterkategorien

Produkte (39.000+)

P5020NSE7QMB-FR - QorIQ P5 Dual-Core 1.6GHz SoC | NXP

P5020NSE7TNB - QorIQ Dual-Core PowerPC SoC 2.0GHz | NXP

P5020NSE7VNB - QorIQ Dual-Core 2GHz Power Arch SoC | NXP

P5020NSN1QMB557 - QorIQ Dual-Core 1.6GHz SoC | NXP | Networking

P5020NSN1TNB - QorIQ P5020 Dual-Core 1.8GHz SoC | NXP | Networking

P5020NSN7MMB557 - QorIQ P5 Dual-Core 1.2GHz SoC | NXP | Networking

P5020NSN7QMB - QorIQ Dual-Core 1.6GHz e5500 SoC, 1295-FCBGA | NXP

P5020NSN7QMB557 - QorIQ P5 Dual-Core 2.0GHz SoC | NXP

P5020NXE1TNB - QorIQ P5020 Dual-Core 2.0GHz SoC | NXP

P5020NXE7QMB557 - QorIQ P5 Dual-Core 2.0GHz SoC | NXP

P5020NXE7TNB - QorIQ P5020 Dual-Core 2GHz SoC MPU | NXP

P5020NXE7VNB - QorIQ P5 2-Core 2.0GHz PowerPC MPU | NXP

P5020NXN1QMB - QorIQ P5 2-Core 2.0GHz PowerPC e5500 MPU | NXP

P5020NXN1TNB - QorIQ P5 Dual-Core 2.0GHz e5500 SoC | NXP

P5020NXN1TNB557 - QorIQ P5020 Dual-Core 64-bit Power SoC | NXP

P5020NXN7QMB557 - QorIQ P5 2-Core 2.0GHz SoC | NXP

P5021NSE72QC - QorIQ P5 Dual-Core 2.2GHz SoC | NXP

P5021NXE7TMC - QorIQ Dual-Core 1.8GHz SoC | NXP Semiconductors

P5040NSE72QC - QorIQ P5 4-Core 2.2GHz SoC | NXP | Networking

P5040NSN12QB - QorIQ P5 4-Core 2.2GHz SoC | NXP Semiconductors

P5040NSN72QC - QorIQ P5 64-Bit SoC, 4x 2.2GHz | NXP

P5040NXE1TMB - QorIQ P5040 4-Core 1.8GHz Power Arch SoC | NXP

P5040NXE7TMC - QorIQ P5 4-Core 1.8GHz SoC, 1295-FCBGA | NXP

P64706-B21 - 32GB DDR5-5600 2Rx8 ECC RDIMM | HPE SmartMemory