Mikrocontroller

Produkte (20.000+)

EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-QFN24T

EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F4-QFN24T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Its low-power platform supports energy-sensitive embedded systems with fast wake-up and energy-saving operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one compact device. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit ARM Cortex-M3 microcontrollers, a branch of embedded processors designed for low-power control, sensing, communications, and user-interface functions. Its 24-pin QFN package also supports compact, high-density PCB layouts. Key device features include a 32 MHz Cortex-M3 core, 4 KB of Flash program memory, 2 KB of SRAM, 17 digital I/O pins, two 16-bit timers, three operational amplifiers, and AES hardware support. The operating supply range of 1.85 V to 3.8 V suits both 2.5 V and 3.3 V system rails. These resources are intended for modest control tasks where energy efficiency, rapid startup, and peripheral integration matter more than large memory capacity. The Cortex-M3 processor uses the ARM Thumb instruction set and provides a conventional embedded software ecosystem. Hardware peripherals reduce processor workload for timing, analog measurements, communications, and data-security functions. The integrated operational amplifiers can support analog signal conditioning, while AES support provides a hardware path for encrypted data handling. Firmware development requires suitable ARM debugging tools, a driver library, and a board configured for the device power, clock, reset, and programming interface. Typical uses include battery-powered sensors, compact industrial monitoring nodes, building and access controls, portable measurement instruments, low-energy IoT endpoints, and small motor or actuator controllers. The 4 KB Flash and 2 KB RAM favor focused applications with modest code and working-data requirements, while the 17 I/O pins allow several sensors, indicators, and external interfaces to share one controller. Designers should verify every exposed-pin function, programming connection, and decoupling requirement against the manufacturer pin description and reference schematic. Place the exposed pad and ground-plane connection according to the package drawing, provide local supply bypassing, and confirm that the firmware linker configuration matches the 4 KB Flash and 2 KB RAM partition. This product page consolidates the core device specifications, practical design considerations, package information, and documented cross-reference candidates into an engineering-focused selection resource. It also distinguishes the exact ordered device from related family members whose memory, core, package suffix, or ordering configuration differs.

Angebot Kontakt
EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs
EFM32TG110F8-D-QFN24

EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-D-QFN24 is an ARM Cortex-M3 32-bit microcontroller running up to 32 MHz with 8 KB of Flash and 2 kB of RAM, housed in a 24-QFN (5 x 5 mm) surface-mount package. It is built on Silicon Labs' energy-friendly EFM32 platform, combining a low-power architecture with fast wake-up from energy-saving modes for battery-operated and energy-harvesting designs. A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory and a set of dedicated peripherals such as timers, GPIO, serial interfaces and analog blocks. Within the component hierarchy, the EFM32TG110 sits in the ARM Cortex-M3 class of 32-bit embedded processors and in the EFM32 Tiny Gecko family of Silicon Labs low-power MCUs, a line positioned between the larger EFM32 Gecko and the ultra-low-power EFM32 Zero Gecko families for designs where energy cost per data point matters. Key features of this device include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of Flash program memory organized as 8K x 8, 2 kB of SRAM, 17 digital I/O pins and two 16-bit timers. Silicon Labs specifies run-mode current of 150 uA/MHz and stop-mode current as low as 0.6 uA, which is the core reason the family is popular in coin-cell and sensor-node products. The device also integrates an AES hardware accelerator, analog peripherals including an operational amplifier, and a 2-pin serial-wire debug interface with a separate 1-wire Serial Wire Viewer pin for profiling and trace output. Technically, the Tiny Gecko platform gives the EFM32TG110 fast wake-up times from its deep-sleep states, retention of output state in shutoff mode, and a peripheral set that can operate autonomously. This lets a design sleep at microamp current, wake, sample a sensor, transmit a short packet and return to sleep without the long wake latency typical of generic low-power MCUs, which directly reduces average current in duty-cycled nodes. Typical applications include wireless sensor nodes and IoT end devices, industrial monitoring and metering, battery-powered handheld instruments, energy-harvesting sensors, smart home accessories and small motor or actuator control sub-systems where a full MCU plus glue logic would be over-specified. When designing with the EFM32TG110F8-D-QFN24, remember that its 2 kB of RAM is the real design constraint: keep stack depth, DMA buffers and protocol buffers lean, and prefer the 8 KB Flash part only for code sizes that genuinely fit. Route the two SWD debug pins to test points so the board can be programmed and profiled in production. This page consolidates device specifications, drop-in alternatives in the same 24-QFN footprint, a parameter-by-parameter comparison, and practical low-power design notes so engineers can qualify the part against a second source and plan a board layout in one pass.

Angebot Kontakt
EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24

EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. It combines a 32-bit RISC core with low-power energy-management techniques, fast wake-up behavior, and energy-saving modes for embedded designs. A microcontroller is a programmable system-on-chip that integrates a CPU, nonvolatile program memory, volatile data memory, peripherals, and I/O into one package. The EFM32 Tiny Gecko family belongs to the hierarchy of embedded processors, microcontrollers, integrated circuits, and semiconductors. It is designed to execute firmware while controlling sensors, communications, user interfaces, and power functions in compact, energy-sensitive systems. The EFM32TG110F8-QFN24 reaches 32 MHz and includes two 16-bit timers, AES and operational-amplifier resources identified by the distributor listings, and 17 digital I/O pins. Its 8 kB Flash supports a modest embedded program image, while 2 kB of RAM provides working memory for control logic and data buffering. The 1.85 V to 3.8 V supply range supports low-voltage embedded systems. The ARM Cortex-M3 processor provides a 32-bit RISC architecture and can achieve as much as 1.25 Dhrystone MIPS/MHz, according to the EFM32TG110 datasheet hosted by Keil. The Cortex-M3 also includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for interrupts generated while the processor sleeps. Typical uses include compact industrial sensors, energy-conscious IoT nodes, wearable accessories, low-power instrumentation, and connected peripherals. Developers can use the 17 available digital I/O pins for sensors, actuators, status indicators, and serial interfaces, while the timers support periodic measurement, timing, or pulse-related tasks. The principal design consideration is the small memory footprint. Firmware must fit within 8 kB of Flash and its working data within 2 kB of RAM, so code size, library use, stack depth, and interrupt handling should be checked early. Hardware design should follow Silicon Labs guidance in AN0002 EFM32 Hardware Design Considerations. This page consolidates verified manufacturer and distributor details, package information, application guidance, and selection considerations. It helps engineers compare the EFM32TG110F8-QFN24 against available alternatives without treating merely similar microcontrollers as verified drop-in replacements.

Angebot Kontakt
EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24T

EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F8-QFN24T is a 32 MHz ARM Cortex-M3 microcontroller with 8 kB Flash, 2 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. The device operates from a 1.85 V to 3.8 V supply and includes two 16-bit timers, AES hardware, and three operational amplifiers. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit embedded MCUs, placing an ARM Cortex-M3 core within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. Silicon Labs positions this low-power platform for energy-sensitive embedded products that require fast wake-up operation and energy-saving modes. The principal feature set includes operation up to 32 MHz, 8 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or control functions. Integrated AES hardware accelerates cryptographic operations, while the three operational amplifiers reduce the need for external analog signal-conditioning components in suitable low-power measurement circuits. The 1.85 V to 3.8 V operating range permits use from 2 V-class and 3.3 V systems when the individual rail, peripheral, and timing requirements remain within device limits. The 24-QFN 5 x 5 mm package provides a compact surface-mount option for space-constrained products. Because the QFN has no exposed leads, PCB layout must provide adequate solderable land area and careful thermal-via placement beneath the package where appropriate. Typical applications include low-power sensor nodes, compact industrial control modules, battery-operated accessories, small motor-control systems, and embedded instrumentation. The ARM Cortex-M3 architecture provides a familiar software ecosystem, while the 8 kB Flash footprint makes the MCU most appropriate for compact control logic rather than resource-intensive applications. The 2 kB RAM also favors targeted buffering and state management over large data acquisition workloads. Designers should allocate decoupling capacitors close to the supply pins, confirm that every exposed-pad thermal and solder-layout requirement follows the package drawing, and keep analog signals away from fast-switching nodes. The three operational amplifiers and 17 I/O pins should be assigned only after checking the pin-mux limitations, analog operating ranges, and shared peripheral resources in the manufacturer pin description table. This product page consolidates the core MCU specifications, package constraints, application guidance, and validated cross-reference options into one engineering-focused reference. It also highlights memory differences and family considerations that determine whether a candidate can replace the EFM32TG110F8-QFN24T without PCB or firmware redesign.

Angebot Kontakt
EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs
EFM32TG11B120F128GM32-BR

EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs

The Silicon Labs EFM32TG11B120F128GM32-BR is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller running at 48 MHz with 128 KB of flash and 32 KB of RAM, housed in a 32-pin QFN (5x5 mm) package. It is offered on tape and reel for high-volume SMT assembly. The part targets ultra-low-power embedded designs with Silicon Labs' proprietary energy-friendly peripherals, fast wake-up time, and deep-sleep current in the sub-microamp range. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The Cortex-M0+ is the most energy-efficient ARM core from Arm Holdings, optimized for deterministic real-time response and minimal gate count. The Tiny Gecko 1 family further layers Silicon Labs' LESENSE, low-energy timer, and EMU (Energy Management Unit) features on top of the Cortex-M0+ to deliver energy-sensitive IoT endpoints that wake, sense, transmit, and return to deep sleep within milliseconds. Key features of this variant include 128 KB flash, 32 KB RAM, a 32-pin QFN package, supply voltage of 1.8 V to 3.8 V, and 24 digital I/O pins. The integrated DC-DC regulator and the broad peripheral mix (ADC, DAC, I2C, SPI, UART, USB, low-energy UART, and timers) make it well suited to battery-powered wireless sensor nodes, wearable health patches, and industrial HVAC controls. Technically, the part is built around a 32-bit ARM Cortex-M0+ core with hardware single-cycle multiplier, supported by a peripheral reflex system that lets DMA, GPIO, and timers collaborate without CPU intervention. The energy-friendly design includes five energy modes (EM0-EM4) with sub-microamp deep-sleep current, hardware crypto (AES-128/256), and a true random number generator (TRNG). Typical applications include IoT sensor endpoints, BLE-enabled beacons, wearable fitness bands, smart-home sensor hubs, industrial HVAC thermostats, battery-powered metering, and remote controls. The wide 1.8-3.8 V supply range simplifies single-cell Li-ion or 2x AA battery designs. When designing with this part, pay attention to the DC-DC inductor selection (the on-chip DC-DC needs an external 10 uH inductor) and the QSPI loading for any external flash expansion. The 32-pin QFN footprint is compact but leaves only 24 GPIO; engineers needing more I/O should step up to the QFP-64 or QFN-64 variants in the same family. This page synthesizes distributor pricing, drop-in alternatives within the same QFN-32 footprint, and practical low-energy design guidance not found in the manufacturer datasheet alone.

Angebot Kontakt
EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs
EFM32TG11B520F128GQ64-B

EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs

The Silicon Labs EFM32TG11B520F128GQ64-B is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller delivering 48 MHz of CPU performance with 128 KB of Flash and 32 KB of RAM in a 64-pin TQFP (10x10 mm) package, qualified for industrial temperature ranges. It is engineered for energy-sensitive connected applications that demand deterministic low-power operation and rich analog integration. What is an ARM Cortex-M0+ microcontroller? It is the most energy-efficient core in the ARM Cortex-M family, providing a 32-bit instruction set and Thumb-2 instruction subset while consuming only a few tens of microamps per MHz in active mode. The Cortex-M0+ core sits inside the EFM32 Tiny Gecko platform, which adds aggressive energy modes, peripheral reflex system, and a low-energy sensor interface (LESENSE) for autonomous sensor monitoring while the CPU sleeps. Key features include a hardware cryptographic engine supporting AES, ECC, SHA, and a True Random Number Generator (TRNG), 50 digital I/O pins with 5 V tolerance, a CAN 2.0 controller, robust capacitive sensing, and integrated 12-bit ADC and DAC peripherals. Active-mode current is rated at approximately 40 uA/MHz in Energy Mode 0 (EM0), with multiple low-energy sleep modes allowing deep sleep currents below 1 uA. Architecturally, the EFM32TG11B520F128GQ64-B uses a Cortex-M0+ core with a single-cycle multiplier and a Nested Vector Interrupt Controller (NVIC). Silicon Labs' proprietary Peripheral Reflex System (PRS) allows peripherals to communicate directly without CPU involvement, dramatically reducing wake-ups. The hardware crypto block offloads AES-128/256, SHA-1/2, ECC operations from the CPU for secure IoT. Typical applications include smart energy metering, IoT sensor nodes, secure connected wearables, capacitive-touch human-machine interfaces, industrial sensor hubs, and battery-powered home automation devices. The cryptographic engine and TRNG make it suitable for authenticated sensor endpoints requiring secure firmware update and tamper resistance. When designing with this MCU, allocate sufficient decoupling (one 100 nF X7R cap per VDD pin) and keep the analog reference traces short to preserve ADC linearity. Use Simplicity Studio with the GeckoPlatform_EFM32TG11B_DFP CMSIS pack for IDE configuration, and enable the JLC flash lock bits before deploying cryptographic keys to production silicon. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, drop-in alternatives within the EFM32 Tiny Gecko family, and practical design notes not aggregated elsewhere, helping engineers compare options and source the part quickly.

Angebot Kontakt
EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG210F16-QFN32

EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG210F16-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz maximum operating frequency, 16 KB of flash memory, and a 32-QFN 6 x 6 mm package. The device combines a low-power embedded architecture with integrated analog and digital peripherals, making it suitable for energy-sensitive embedded systems that require deterministic control and low standby consumption. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The EFM32TG series belongs to the MCU and embedded-processor hierarchy and combines ARM Cortex-M3 processing with energy-saving modes, autonomous peripheral operation, and fast wake-up behavior. These features distinguish it from conventional higher-power microcontroller platforms designed primarily for continuous operation. Verified distributor information identifies the EFM32TG210F16-QFN32 as an ARM Cortex-M3 Tiny Gecko MCU with 32-bit processing, 32 MHz operation, 16 KB flash organized as 16K x 8, and a 32-QFN 6 x 6 mm package. Silicon Labs materials also describe EFM32TG devices as low-power devices with energy-saving modes and autonomous peripherals. The available distributor listing indicates AES and operational-amplifier functionality, but exact peripheral counts and detailed electrical limits are not provided in the supplied data. The EFM32TG210F16-QFN32 is intended for applications where low power, compactness, and integrated control are more important than maximum flash capacity. Its 32 MHz Cortex-M3 core supports general embedded control, while the Tiny Gecko low-power platform supports battery-operated equipment. The 16 KB flash memory is modest compared with larger general-purpose MCUs, so firmware should be evaluated for image size and update requirements before design commitment. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered measurement equipment, consumer accessories, and embedded control modules. For designs requiring more program storage, the EFM32TG210F32-QFN32 family member provides 32 KB flash according to the manufacturer page and should be checked for footprint, memory, and peripheral compatibility. The device should also be reviewed against the application’s supply-voltage, temperature, and qualification requirements. Designers should place the decoupling network close to the device supply pins, keep analog and digital return-current paths controlled, and confirm the exposed-pad connection and thermal strategy against the package drawing. The QFN package is compact but not leaded, so assembly capability and soldering profile should be reviewed before production release. Use the manufacturer datasheet and reference design guidance for final pin, layout, and peripheral configuration decisions. This page combines verified manufacturer and distributor information, a transparent alternative comparison, and practical design guidance intended to help engineers evaluate fit, footprint, memory, low-power behavior, and sourcing constraints before selecting the EFM32TG210F16-QFN32.

Angebot Kontakt
EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F32-QFN32

EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F32-QFN32 is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 32 kB of Flash memory, 4 kB of RAM, and a 32-QFN 6 x 6 mm package. The device provides 24 digital I/O pins and is designed for energy-sensitive embedded systems requiring compact size, low-power operation, and fast wake-up performance. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-compute embedded processor. Microcontrollers combine a processor core, Flash program memory, RAM, clocks, communications peripherals, timers, analog interfaces, and general-purpose I/O in one integrated circuit. The EFM32 Tiny Gecko family extends this MCU hierarchy with low-energy operating techniques designed for battery-operated and intermittently powered equipment. Key features include an ARM Cortex-M3 core operating up to 32 MHz, 32 kB Flash, 4 kB RAM, 24 digital I/O pins, and two 16-bit timers. The low-power platform includes energy-saving modes and fast wake-up behavior. Its 32-QFN package occupies only 6 x 6 mm, making it suitable for space-constrained control and sensing products. The EFM32TG210F32-QFN32 integrates an ARM Cortex-M3 processor with a precision internal voltage regulator, oscillators, timers, GPIO, serial interfaces, and low-power control logic. According to the manufacturer documentation, the Cortex-M3 architecture includes a 32-bit RISC processor, a Memory Protection Unit supporting as many as eight memory segments, and a Wake-up Interrupt Controller for events occurring while the processor sleeps. Typical uses include battery-powered sensor nodes, compact industrial controls, energy-harvesting equipment, portable instruments, and connected accessories. The combination of 32-bit processing, 4 kB RAM, and 24 digital I/O pins supports control logic, communication protocols, and multiple peripheral functions without requiring a separate processor. Board design should preserve the exact package footprint, power-decoupling structure, exposed-pad connection, and programming interface specified by the manufacturer. Confirm pin multiplexing, peripheral availability, and low-power mode requirements in the EFM32TG210 datasheet and the EFM32 Cortex-M3 Reference Manual before finalizing the PCB and firmware. This page consolidates the core device specifications, application guidance, verified source links, and same-family drop-in alternatives. It also identifies where package, pin, pricing, and lifecycle details must be confirmed directly with Silicon Labs before production release.

Angebot Kontakt
EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-D-QFN32

EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-pin QFN package with an exposed pad. It combines a compact memory footprint with energy-saving modes and fast wake-up behavior for embedded systems that prioritize low power. An EFM32 microcontroller is an embedded processor platform that integrates a CPU, memory, analog and digital peripherals, interrupt control, and energy-management functions into one device. The EFM32TG210 belongs to the Tiny Gecko family, where the ARM Cortex-M3 processor operates within a system designed for both performance-sensitive control and low-current standby operation. This hierarchy places the device among 32-bit microcontrollers, embedded processors, and general-purpose semiconductor components. The Tiny Gecko architecture operates at up to 32 MHz and includes two 16-bit timers, digital I/O, AES hardware support, and an operational amplifier according to the product listing. Energy-sensitive operation is supported by consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make the controller useful in battery-operated products where duty-cycled sensing and measurement must coexist with responsive control firmware. The EFM32TG210F8-D-QFN32 uses 8 kB Flash for program storage and 2 kB RAM for working data. Its integrated analog features can reduce the need for external signal-conditioning components in compact sensor nodes, while the 24 digital I/O pins support switches, indicators, communications, and external control signals. The exposed-pad QFN construction also provides a thermal path through PCB copper, making package layout an important part of reliable operation. Typical uses include connected sensor nodes, compact industrial monitors, wearable accessories, low-power measurement instruments, and consumer products that wake briefly to acquire or transmit data. In these systems, the MCU acts as the central controller: it samples inputs, executes embedded algorithms, manages timers, controls peripherals, and returns to a low-energy state whenever the measurement cycle is complete. Designers should follow the manufacturer pin-description table when assigning every QFN signal and must preserve the exposed-pad connection to the appropriate PCB plane. Place decoupling capacitors close to the supply pins, confirm oscillator and reset requirements in the device datasheet, and calculate the duty-cycle-dependent average current before selecting the power source. This page combines the core device specifications, engineering comparisons, application guidance, and practical design notes needed to evaluate the EFM32TG210F8-D-QFN32.

Angebot Kontakt
EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32

EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN package. Its supply range is 1.85 V to 3.8 V. Designed around the Tiny Gecko low-power platform, the device targets energy-sensitive embedded products that need responsive control, compact size, and low-power operation. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital interfaces, timers, and supporting peripherals on one semiconductor device. The EFM32TG210F8-QFN32 uses the ARM Cortex-M3 architecture, placing it within the 32-bit embedded MCU -> microcontroller -> semiconductor hierarchy. Its combination of 32 MHz processing and 8 kB Flash makes it appropriate for compact control tasks rather than resource-heavy edge-computing workloads. Key features include a 32 MHz ARM Cortex-M3 core, 8 kB Flash memory, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers. The official product description also identifies low-energy techniques, fast wake-up behavior, and energy-saving modes. These characteristics suit systems that spend substantial time between active operations while retaining deterministic access to embedded peripherals. The device belongs to Silicon Labs' Tiny Gecko family and provides an integrated AES and operational-amplifier feature set according to distributor product data. Its 1.85 V to 3.8 V operating range allows use in low-voltage embedded designs, while the 32-QFN 6x6 mm package supports compact PCB layouts. Exact peripheral availability, electrical limits, pin functions, and tool-support details should be confirmed against the manufacturer documentation before production design release. Typical applications include battery-powered sensing, compact industrial controllers, wearable or accessory electronics, low-power embedded nodes, and portable instruments. In these systems, the MCU can execute firmware, operate timers, read inputs, and control outputs while using its low-power platform to reduce activity outside the required measurement or control intervals. Designers should verify the QFN land pattern, exposed-pad connection, pin multiplexing, decoupling requirements, and supported voltage range in the manufacturer documentation. The 6x6 mm QFN package also requires careful PCB layout and assembly process control to achieve reliable thermal and electrical performance.

Angebot Kontakt
EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32T

EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 24 digital I/O pins, and AES hardware encryption in a 32-QFN 6 x 6 mm package. Its 1.85 V to 3.8 V operating range supports energy-efficient embedded designs. The device also provides three operational amplifiers and two 16-bit timers, making it suitable for compact sensing, control, and connected products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. Within the hierarchy of embedded semiconductors, the EFM32TG210F8-QFN32T is an ARM Cortex-M3 MCU, an energy-focused 32-bit embedded controller used for battery-operated equipment, industrial controls, consumer accessories, and connected sensors. Its low-energy operating techniques and short wake-up behavior are particularly relevant when the product spends substantial time in sleep or deep-sleep modes. Key features include an ARM Cortex-M3 processor core with a maximum clock frequency of 32 MHz, 8 kB Flash for firmware storage, 2 kB SRAM for working memory, and AES encryption support. The integrated peripheral set includes 24 digital I/O pins, two 16-bit timers, and three operational amplifiers. These resources allow a design to combine control logic, signal conditioning, and communications functions without relying on several separate discrete components. The Tiny Gecko architecture integrates processing, low-power management, and energy-sensitive peripherals in one system-on-chip design. Its 1.85 V to 3.8 V supply range permits operation across low-voltage embedded systems, while the 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller. The three integrated op-amps can reduce the component count in sensor, measurement, and analog-interface designs when their input, output, and stability requirements match the device specifications. Typical applications include battery-powered sensor nodes, industrial monitoring modules, compact access-control products, wearable accessories, and energy-conscious embedded controls. The microcontroller can execute protocol and control firmware in Flash, retain transient data in its 2 kB SRAM, and use its timers and op-amps to support periodic measurements or analog signal conditioning. The manufacturer product page identifies the EFM32TG210F8-QFN32 family as being optimized for energy-sensitive applications. Designers should verify the exact QFN pin assignment, exposed-pad requirements, decoupling, and operating limits against the manufacturer datasheet before layout. Firmware must also account for the limited 8 kB Flash and 2 kB RAM budgets. Confirming the complete pinout, peripheral multiplexing, and PCB land pattern is essential because this page only uses values explicitly present in the supplied verified sources. This page consolidates verified manufacturer and distributor information, distinguishes electrically compatible family alternatives, and adds practical selection guidance for engineers evaluating the EFM32TG210F8-QFN32T. It also highlights where additional datasheet data is required rather than substituting unverified electrical, package, pricing, or lifecycle assumptions.

Angebot Kontakt
EFM32TG222F16-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG222F16-QFP48

EFM32TG222F16-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG222F16-QFP48 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 16 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins, all housed in a 48-pin TQFP package measuring 7 x 7 mm. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The EFM32 belongs to the Tiny Gecko family, a branch of Silicon Labs' energy-conscious 32-bit MCU portfolio. Its architecture supports low-energy operation, fast wake-up behavior, and energy-saving modes, making it suitable for embedded systems that must balance responsive control with restricted power budgets. The most prominent device parameters are its 32 MHz Cortex-M3 operating speed, 16 kB Flash configuration, and 4 kB RAM. The device also provides 37 digital I/O pins and two 16-bit timers. These resources support event-driven sensing, local control, communication, and compact user interfaces without requiring a separate processor. The listed AES and operational-amplifier features extend the device beyond basic general-purpose I/O. Technical performance comes from the ARM Cortex-M3 processor and Silicon Labs' low-power Tiny Gecko platform. The processor provides 32-bit instruction handling, while the peripheral system includes configurable I/O locations and two dedicated 16-bit timers. Operating voltage is specified from 1.85 V to 3.8 V, allowing the MCU to operate across common low-voltage supply ranges while supporting both 2.5 V and 3.3 V system architectures. Typical uses include connected sensor nodes, compact industrial controls, energy-monitoring instruments, low-power actuator controllers, and embedded consumer devices. In these systems, the MCU can acquire sensor data, execute control logic, manage a serial communication link, and enter a low-energy state when extended activity is unnecessary. Its 37 available I/O pins are particularly useful when the design must support multiple discrete inputs, indicators, or external control signals. Designers should preserve adequate routing flexibility around the 48-pin TQFP footprint and confirm the exact peripheral assignments for the selected board configuration. Power-supply decoupling, grounding, and signal-integrity layout remain essential even in a low-power design. Firmware should use the low-energy modes only after validating wake-up behavior and required peripheral states. This product page combines the manufacturer specifications with a practical comparison against related EFM32 devices, application guidance, and design considerations. It is intended to help engineers assess memory capacity, package reuse, power behavior, and migration options before committing a PCB layout to production.

Angebot Kontakt
EFM32TG222F8-D-QFP48 - 32MHz ARM MCU | Silicon Labs
EFM32TG222F8-D-QFP48

EFM32TG222F8-D-QFP48 - 32MHz ARM MCU | Silicon Labs

Silicon Labs EFM32TG222F8-D-QFP48 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 KB of Flash, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. Its operating supply range is 1.98 V to 3.8 V. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ARM Cortex-M3 belongs to the MCU hierarchy: microcontroller -> embedded processor -> programmable semiconductor. Tiny Gecko MCUs combine conventional processing performance with low-power operating techniques, energy-saving modes, and fast wake-up behavior for battery-powered and energy-conscious products. The EFM32TG222F8-D-QFP48 provides 8 KB of Flash for firmware, 2 KB of RAM for working data, and two 16-bit timers alongside 37 digital I/O pins. These resources suit compact control products that require mixed signal acquisition, timing, serial communication, and general-purpose digital control without using a larger microcontroller package. Its architecture is based on a 32-bit ARM Cortex-M3 core capable of running at up to 32 MHz. The low-power platform supports energy-sensitive designs by combining sleep-oriented operating modes with fast wake-up capability. Exact current consumption, wake-up timing, and peripheral performance values should be selected from the device datasheet for the specific operating mode and clock configuration. Typical uses include compact industrial sensors, low-power wireless end nodes, building-control modules, battery-operated instruments, and connected accessories. The 48-pin TQFP provides enough I/O for external sensing interfaces, indicator control, communications, programming, and supporting power circuitry while remaining suitable for conventional PCB assembly. When planning the PCB, reserve the pins for power, ground, programming, reset, and decoupling according to the manufacturer pin-description table. Use short return paths and place the required input and bypass capacitors close to their associated supply pins. Firmware memory is limited, so partition the 8 KB Flash for boot code, application code, and configuration data with margin for future updates. This product page combines the manufacturer specifications, package details, verified sourcing information, drop-in candidate analysis, application guidance, and practical design notes into a focused engineering reference for evaluating the EFM32TG222F8-D-QFP48 in low-power embedded systems.

Angebot Kontakt
EFM32TG222F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F8-QFP48

EFM32TG222F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F8-QFP48 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 kB of Flash, 2 kB of RAM, and 37 digital I/O pins, housed in a 48-TQFP 7 x 7 mm package. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one semiconductor package. The EFM32TG222F8-QFP48 belongs to the Tiny Gecko family and combines general-purpose embedded processing with energy-saving modes and fast wake-up behavior. Its position in the hierarchy is MCU -> embedded microcontroller -> ARM Cortex-M3 processor -> Silicon Labs Tiny Gecko platform. The device provides 8 kB Flash organized as 8K x 8 and 2 kB RAM. Its listed peripheral resources include 37 digital I/O pins and two 16-bit timers. These features suit compact embedded products that need deterministic control, low-power operation, and a compact 48-TQFP footprint rather than a large high-pin-count MCU package. The ARM Cortex-M3 core provides a 32-bit processing architecture at speeds up to 32 MHz. The manufacturer describes the EFM32TG222F8-QFP48 as energy-sensitive and highlights its low-power platform, innovative low-energy techniques, fast wake-up times, and energy-saving modes. The 48-TQFP package measures 7 x 7 mm and is intended for surface-mount PCB assembly. Typical applications include low-power sensor nodes, compact industrial controllers, battery-operated instruments, wearable accessories, and embedded control modules. The 37 digital I/O pins provide interfaces for sensors, indicators, actuators, and communication peripherals, while the two 16-bit timers support timing, pulse measurement, and periodic control tasks. Designers should verify the complete pin multiplexing, peripheral availability, operating voltage, and timing limits against the manufacturer datasheet before finalizing a PCB. In particular, do not infer analog, communication, or debug capabilities from the digital-I/O count alone; each function must be assigned to a valid pin in the device pin configuration. This page consolidates verified manufacturer and distributor information, distinguishes unavailable technical fields, and avoids presenting unverified substitutes as drop-in replacements. For an energy-sensitive 32 MHz Cortex-M3 design, the EFM32TG222F8-QFP48 provides a defined 8 kB Flash, 2 kB RAM, and 48-TQFP integration baseline.

Angebot Kontakt
EFM32TG222F8-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F8-QFP48T

EFM32TG222F8-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F8-QFP48T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. It also includes three operational amplifiers and AES capability, combining general-purpose embedded control with energy-conscious peripheral integration. A microcontroller is a semiconductor device that integrates a processor core, memory, I/O, timers, and communication peripherals into one component. The EFM32TG222F8-QFP48T belongs to the Tiny Gecko family, where the ARM Cortex-M3 core provides a compact instruction set for embedded control. Within the device hierarchy, it is a 32-bit MCU, an embedded processor, and a power-sensitive mixed-signal control platform. Three principal characteristics define this configuration: a maximum CPU speed of 32 MHz, 8 KB of Flash for firmware, and 2 KB of SRAM for working data. The 37 digital I/O pins provide interface capacity for sensors, actuators, human-interface devices, and external control signals. Two 16-bit timers support periodic timing, pulse measurement, and basic motor or signal-generation tasks. The integrated operational amplifiers are useful when a board must amplify weak analog signals without adding separate amplifier packages. AES support is valuable for products that need hardware-assisted encryption and decryption. The low-energy platform, fast wake-up behavior, and energy-saving modes are intended to reduce active and idle consumption in compact embedded systems. Typical uses include battery-powered sensor nodes, industrial condition-monitoring terminals, compact instrumentation, building-control endpoints, and low-power data-acquisition products. The three operational amplifiers can support analog front ends, while the timer and I/O resources can handle periodic sensing and discrete control functions. PCB design should preserve clean analog and digital return paths, especially when the internal amplifiers process low-level signals. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and use the manufacturer pin-description table when assigning package leads and programming functions. This product overview combines the core Tiny Gecko specifications, same-package replacement options, interface considerations, and practical selection guidance. It is designed to help engineers evaluate clock performance, memory capacity, peripheral integration, package compatibility, and low-power behavior before completing an embedded design.

Angebot Kontakt
EFM32TG225F16-BGA48 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG225F16-BGA48

EFM32TG225F16-BGA48 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG225F16-BGA48 is an ARM Cortex-M3 Tiny Gecko microcontroller with a 32-bit architecture, 32 MHz operating frequency, and 16 KB of Flash memory in a 48-BGA package measuring 4 x 4 mm. The device operates from a 1.85 V to 3.8 V supply and combines low-power design with fast wake-up behavior, making it suitable for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The ARM Cortex-M3 core belongs to a compact embedded processor family designed for deterministic control tasks and energy-efficient operation. Within the product hierarchy, the EFM32TG225F16-BGA48 is a 32-bit microcontroller in the Silicon Labs Tiny Gecko family, providing greater processing capability than 8-bit designs while retaining a small system footprint. The EFM32TG225F16-BGA48 operates at up to 32 MHz and includes 16 KB of Flash, identified by the part number as 16K x 8 bits. Its 48-BGA package supports dense PCB layouts in applications where component area is limited. The 1.85 V to 3.8 V operating range accommodates low-voltage digital systems, while the listed 2.5 V and 3.3 V operating points align with common embedded supply requirements. The device is also identified with AES and operational-amplifier capabilities. The Tiny Gecko platform emphasizes low-power operation through energy-saving modes and rapid wake-up behavior. These characteristics matter in duty-cycled products because the controller can reduce consumption during inactive periods and resume processing quickly when an input, timer, or communication event requires attention. Its Cortex-M3 instruction set supports efficient event handling while providing a familiar software-development environment for embedded toolchains and peripheral configurations. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, energy-aware IoT endpoints, wearable accessories, and embedded control modules. The small 48-BGA package is especially useful where PCB area is constrained, while the 32 MHz processing rate supports responsive control and communication routines. Designers should confirm memory requirements, peripheral assignments, pin functions, and power sequencing in the manufacturer datasheet before finalizing a layout. BGA assembly requires careful PCB design, including controlled pad geometry, appropriate solder-mask and paste patterns, adequate thermal conditions, and inspection coverage for hidden joints. Place stable decoupling close to the supply pins, confirm the operating voltage against every peripheral rail, and use the manufacturer pin-description table when assigning traces. This page also identifies compatible family alternatives and engineering guidance for evaluating a redesign. The information here combines the device architecture, package constraints, sourcing considerations, alternatives, and design guidance into one engineering-focused reference. It is intended to help developers assess whether the EFM32TG225F16-BGA48 matches a low-power, space-constrained control design before requesting a quote or beginning PCB implementation.

Angebot Kontakt
EFM32TG225F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs
EFM32TG225F8-BGA48

EFM32TG225F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs

The Silicon Labs EFM32TG225F8-BGA48 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory and 2 KB of RAM, in a 48-BGA (4x4 mm) surface-mount package. Its supply-voltage range is 1.85 V to 3.8 V. The device belongs to the Tiny Gecko family and is designed for energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. In the EFM32 family hierarchy, this MCU combines an ARM Cortex-M3 processor with embedded Flash and SRAM, while configurable peripherals allow designers to route functions through a shared I/O matrix. This supports compact PCB designs and efficient peripheral sharing in embedded products. The EFM32TG225F8-BGA48 features a single-core 32-bit architecture, 8 KB of Flash, 2 KB of RAM, AES capability, and three operational amplifiers according to the verified distributor data. The 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller while retaining a simple embedded design. The 48-BGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection. Silicon Labs markets the Tiny Gecko platform around low-power operation, fast wake-up behavior, and energy-saving modes. Those characteristics suit battery-operated equipment and compact industrial products where average current consumption matters between active tasks. Exact sleep currents, wake-up timing, GPIO count, and analog performance must be confirmed in the manufacturer datasheet because those values were not included in the supplied verified excerpts. Typical uses include compact sensor nodes, low-power instrumentation, connected maintenance equipment, energy-aware embedded controls, and portable products requiring an efficient 32-bit processor. Three operational amplifiers can support analog signal conditioning when their electrical limits and routing constraints match the application. AES capability can serve secure firmware, authenticated communication, or data-protection routines when used as part of a properly designed security architecture. For PCB design, use a BGA-layout-qualified stackup and route all 48 package balls or pads to the required power, ground, signal, and programming interfaces. Provide clean supplies within 1.85 V to 3.8 V and follow the manufacturer’s decoupling and exposed-pad guidance. Because the complete pin map was not present in the verified data, this page does not infer individual pin functions. This page consolidates verified distributor specifications, package details, sourcing links, comparison data, and practical integration guidance. It separates confirmed facts from unavailable parameters so engineers can make an evidence-based choice without assuming missing flash, memory, pinout, or compliance details.

Angebot Kontakt
EFM32TG225F8-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG225F8-BGA48T

EFM32TG225F8-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG225F8-BGA48T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 KB of Flash memory and 2 KB of RAM, in a 48-BGA (4 x 4 mm) package. Its supply-voltage range is 1.85 V to 3.8 V, while integrated AES encryption and three operational amplifiers support compact, security-conscious analog and control designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. Within the embedded-control hierarchy, the EFM32TG225F8-BGA48T is a 32-bit microcontroller based on the ARM Cortex-M3 RISC architecture. It belongs to the Tiny Gecko family and combines general-purpose embedded processing with energy-saving operating modes, making it suitable for battery-operated and portable products. The principal features include a 32 MHz Cortex-M3 core, 8 KB of Flash program memory, 2 KB of SRAM, AES hardware acceleration, and three integrated operational amplifiers. Silicon Labs specifies run-mode consumption as 150 uA/MHz and stop-mode consumption as low as 0.6 uA. These characteristics allow the MCU to balance responsive processing against low standby demand when an application spends substantial time sleeping between measurements or control actions. The Tiny Gecko architecture also emphasizes autonomous peripherals and broad analog integration. Peripheral activity can reduce the need for continuous central-processor intervention, while the operational amplifiers can handle low-level signal conditioning close to the sensing or drive circuit. This integration helps reduce board size, external component count, and the energy required to move analog signals through a larger external signal chain. Typical uses include battery-powered sensing nodes, compact industrial monitors, low-power wireless-control endpoints, automated test equipment, and embedded instrumentation. The device is particularly appropriate when a design needs a 32-bit control core, short energy-saving-mode transitions, local analog amplification, and hardware-assisted AES without allocating a large external memory subsystem. PCB design should account for the 48-BGA footprint, exposed-pad thermal requirements, and the small 4 x 4 mm body. Keep high-speed traces short, provide a continuous ground reference, route sensitive analog inputs away from switching nodes, and follow the manufacturer pin-description and land-pattern tables when assigning BGA balls and power planes. This product page combines the EFM32TG225F8-BGA48T electrical characteristics, package information, low-power use cases, drop-in family alternatives, and practical implementation guidance. The result supports faster MCU selection, more accurate PCB planning, and clearer decisions between flash-memory configurations and related Tiny Gecko devices.

Angebot Kontakt
EFM32TG225F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG225F8-D-BGA48

EFM32TG225F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG225F8-D-BGA48 is a 32-bit ARM Cortex-M3 microcontroller in a 48-BGA 4 x 4 mm package. It operates at up to 32 MHz, provides 8 KB of flash memory and 2 KB of RAM, and accepts a 1.98 V to 3.8 V supply. The device also includes AES encryption, three operational amplifiers, and configurable peripheral I/O for compact embedded control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG series belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M3 microcontroller, and energy-conscious embedded processor. Silicon Labs designed the Tiny Gecko family around low-power operation, autonomous peripherals, and extensive analog integration, making it useful for battery-powered equipment and compact industrial systems. The principal features include a 32 MHz ARM Cortex-M3 core, 8 KB flash, 2 KB RAM, AES hardware acceleration, three op-amps, and a 1.98 V to 3.8 V operating range. The 48-BGA package supports dense PCB layouts where external flash, additional analog circuitry, or a larger package would be undesirable. Configurable peripheral I/O allows designers to assign functions such as communication, timers, and serial interfaces to available pins. Power efficiency is a central architecture feature. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 microamp in Stop mode and 150 microamp per MHz in Run mode. These figures make average-current budgeting important: application code, interrupt frequency, peripheral activity, and sleep-mode entry strategy can change total consumption more than the headline CPU frequency alone. Typical uses include low-power sensor nodes, industrial monitoring modules, portable measurement instruments, connected accessories, and compact control boards. The integrated analog resources can reduce the number of external components in low-voltage signal-conditioning systems, while AES support can protect stored or transmitted data without requiring a separate cryptographic accelerator. When designing around this MCU, place decoupling capacitors close to the supply pins and use the package data in the Silicon Labs EFM32TG datasheet for the complete land pattern. Confirm all pin multiplexing, analog limits, and exposed-pad connections in the manufacturer pinout and hardware-design guidance before routing a PCB. This product overview combines the verified device identity, package, memory, clock, voltage, and low-power characteristics with practical guidance for firmware, analog, and PCB implementation. It also distinguishes the available same-family upgrade paths by memory configuration and emphasizes the need to verify pin compatibility before substitution.

Angebot Kontakt
EFM32TG230F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F16-QFN64

EFM32TG230F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F16-QFN64 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz operating frequency, 16 KB of flash memory, 4 KB of RAM, AES hardware acceleration, three operational amplifiers, and a 64-QFN 9 x 9 mm package. Its operating supply range is 1.85 V to 3.8 V, making it suitable for low-voltage embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The EFM32 Tiny Gecko family combines ARM Cortex-M3 processing with energy-conscious peripherals and low-power operating modes. This places it within the hierarchy of microcontroller, embedded processor, 32-bit MCU, and energy-efficient embedded controller. The EFM32TG230F16-QFN64 provides 16 KB of flash for firmware and 4 KB of SRAM for working data. It operates at up to 32 MHz and includes AES encryption, three operational amplifiers, and a range of low-power peripherals. These resources support responsive control, signal conditioning, secure communication, and connected-product designs without requiring a separate host processor. Its Tiny Gecko architecture is designed for energy-sensitive applications by combining fast processing with multiple sleep and shutdown states. The 16 KB flash capacity suits compact control tasks, sensor nodes, battery-powered accessories, and equipment controllers. The operational amplifiers can reduce external signal-conditioning component count, while AES supports hardware-assisted protection for data transferred through connected interfaces. Typical uses include IoT sensor nodes, industrial monitoring devices, low-power consumer accessories, building-control equipment, and portable instruments. Designers can use the Cortex-M3 ecosystem for firmware development, peripheral configuration, debugging, and production programming. The 64-QFN format also supports compact PCB layouts, although exposed-pad thermal management and careful high-speed layout remain important. The main design consideration is memory planning: 16 KB of flash and 4 KB of SRAM suit compact applications but constrain large protocol stacks, graphics buffers, or extensive local data storage. Confirm the final firmware image size, interrupt requirements, peripheral mix, and pin multiplexing before releasing a PCB layout. This product page combines the manufacturer-level device identity with verified package, memory, voltage, frequency, security, and analog features, plus practical design guidance for MCU selection, firmware planning, thermal design, and drop-in replacement assessment.

Angebot Kontakt
EFM32TG230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F32-QFN64

EFM32TG230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG230F32-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB Flash memory, 4 KB RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. The device combines general-purpose embedded processing with energy-saving modes and fast wake-up behavior for energy-sensitive applications. An MCU is a compact semiconductor system containing a processor core, program memory, data memory, peripherals, and communication interfaces. The EFM32TG230 belongs to the Tiny Gecko family, a low-power platform within the broader embedded microcontroller and semiconductor hierarchy. Its Cortex-M3 architecture provides a 32-bit RISC processing environment suitable for control logic, monitoring, and connected embedded products. Key features include a maximum clock frequency of 32 MHz, 32 KB of Flash, 4 KB of RAM, and two 16-bit timers. The manufacturer describes 56 digital I/O pins, giving the 64-QFN device a comparatively dense interface count for its 9 x 9 mm footprint. An operating supply range of 1.85 V to 3.8 V supports both 2.5 V and 3.3 V system designs identified in the verified distributor data. The Tiny Gecko platform emphasizes low-energy operation, including energy-saving modes and fast wake-up times. These characteristics are particularly useful when the controller must alternate between active measurement or control and extended low-power states. The Cortex-M3 core also includes a Memory Protection Unit supporting as many as eight memory segments and a Wake-up Interrupt Controller for servicing interrupts while the CPU is asleep, according to the linked EFM32TG230 datasheet. Typical applications include energy-harvesting equipment, industrial sensing, building automation, environmental monitoring, portable instruments, and connected embedded products. In these systems, the device can execute control logic locally while using its low-power operating modes to reduce average energy consumption. Its 32 KB Flash capacity is suitable for moderate firmware images, while the 4 KB RAM supports working data, stacks, and peripheral buffers. PCB design should account for the exposed thermal pad, supply decoupling, and exposed-pad soldering requirements of the 64-QFN package. Place input and output capacitors close to their associated supply pins, maintain the manufacturer’s land pattern, and provide a low-impedance ground reference. Firmware and hardware revisions should also be checked before replacing this device with another EFM32 member because memory density and temperature-grade suffixes can change functionality or qualification. This page consolidates the verified manufacturer and distributor specifications, separates confirmed facts from unavailable pricing and lifecycle details, and identifies same-family migration candidates for engineering review. It also highlights the package, memory, clock, and low-power constraints that matter when selecting or replacing the EFM32TG230F32-QFN64.

Angebot Kontakt
EFM32TG230F8-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-D-QFN64

EFM32TG230F8-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG230F8-D-QFN64 is an ARM Cortex-M3 32-bit microcontroller rated for operation up to 32 MHz, with 8 kB Flash memory, 2 kB RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. Its 1.98 V to 3.8 V supply range supports compact, low-energy embedded systems that require efficient processing and broad peripheral integration. A microcontroller, or MCU, is a semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko family belongs to the 32-bit embedded-microcontroller hierarchy, combining an ARM Cortex-M3 core with low-power operating techniques, energy-saving modes, and fast wake-up behavior. These characteristics make the device particularly relevant to battery-powered sensors, compact industrial controls, portable instruments, and wearable systems where energy consumption affects service intervals. The EFM32TG230F8-D-QFN64 includes 8 kB Flash for firmware and 2 kB RAM for working data. Its peripheral set includes two 16-bit timers and 56 digital I/O pins, providing resources for timing, signal acquisition, control outputs, and communication peripherals. The 32 MHz Cortex-M3 processor supports deterministic embedded workloads while the device’s low-power platform helps minimize active energy use between system events. The Tiny Gecko architecture is designed around energy-sensitive operation rather than maximum processor throughput. Fast wake-up from low-energy states can reduce the time the MCU spends at higher power levels in intermittently active systems. Designers can therefore balance processing capability against duty cycle, peripheral activity, and battery capacity when establishing a system-level power budget. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, compact motor-control interfaces, building-automation nodes, and portable measurement products. The combination of 56 digital I/O pins and two 16-bit timers is useful in designs that connect discrete sensors, indicators, switches, or actuators while avoiding a larger package. A critical design consideration is software and firmware footprint. The 8 kB Flash and 2 kB RAM constrain the available code and data space, so applications should use a compact real-time operating system or bare-metal framework, minimize dynamic allocation, and remove unused peripheral initialization code. Firmware must also respect the device’s documented electrical and clock limits. This product page combines manufacturer specifications, package and sourcing information, drop-in alternatives, comparison criteria, and practical design guidance. It is intended to help engineers evaluate the EFM32TG230F8-D-QFN64 against memory-graded Tiny Gecko options and plan firmware, board-layout, and power-management work before committing the device to a production design.

Angebot Kontakt
EFM32TG230F8-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-QFN64

EFM32TG230F8-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F8-QFN64 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory, 2 KB of RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. It combines a 32-bit RISC core with low-power energy-management techniques, fast wake-up behavior, and energy-saving modes for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. The EFM32TG230 belongs to the Tiny Gecko family and is positioned between simple 8-bit controllers and higher-resource 32-bit embedded processors. Its Cortex-M3 architecture supports interrupt-driven control, while the integrated Flash, RAM, timers, communication interfaces, and analog peripherals reduce the need for external components. Verified manufacturer and distributor data identifies a 32-bit ARM Cortex-M3 core, 32 MHz maximum speed, 8 KB Flash, 2 KB RAM, 56 digital I/O pins, and two 16-bit timers. The device is suited to energy-sensitive applications that require compact embedded control, low-power operation, and moderate processing performance. Its 64-QFN package also provides a dense land pattern for space-constrained PCB designs. The manufacturer describes the Tiny Gecko platform as using innovative low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics matter in systems that spend substantial time sleeping, such as portable instruments, connected sensors, industrial monitoring nodes, and low-power embedded products. The exact current, voltage, memory, peripheral, environmental, and compliance values not present in the supplied verified data are not inferred here. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact control systems, connected embedded products, and battery-operated devices. Firmware can use the Cortex-M3 interrupt architecture and timers for deterministic control, while low-power modes help reduce energy use between measurement or communication events. Designers should verify the complete electrical limits, pin multiplexing, exposed-pad requirements, decoupling requirements, and firmware-support status against the official Silicon Labs documentation before layout or production release. The supplied sources provide a manufacturer product page, manufacturer-linked technical documentation, and distributor records, but do not provide a complete verified pinout or lifecycle statement. This page consolidates the supplied manufacturer and distributor records, separates verified facts from unavailable data, and adds practical selection and sourcing guidance for engineers evaluating the EFM32TG230F8-QFN64.

Angebot Kontakt
EFM32TG230F8-QFN64T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-QFN64T

EFM32TG230F8-QFN64T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F8-QFN64T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 KB Flash, 2 KB RAM, 56 digital I/O pins, and a 64-QFN 9x9 mm package. It is designed for energy-sensitive applications that require fast wake-up times, low-power operating modes, and a compact surface-mount footprint. The supplied manufacturer information identifies 2 x 16-bit timers and emphasizes the EFM32 low-energy platform. The device also appears with AES and 3 operational amplifiers in distributor listings. An MCU is a semiconductor that integrates a processor core, memory, peripherals, and I/O into one component. The ARM Cortex-M3 class provides a 32-bit processing architecture for embedded control, while the EFM32 family adds energy-management techniques that are useful in battery-operated products. In the product hierarchy, the EFM32TG230F8-QFN64T is an ARM Cortex-M3 microcontroller, an embedded processor, and a semiconductor component. Key verified characteristics include a 32 MHz maximum clock speed, 8 KB Flash memory, 2 KB RAM, 56 digital I/O pins, two 16-bit timers, and a 64-QFN package measuring 9 x 9 mm. The ordering suffix T indicates the tray packaging supplied by the distributor, while the family part number identifies the base EFM32TG230F8-QFN64 device. These specifications suit compact sensor nodes, industrial monitoring, wearable accessories, and portable measurement products. The EFM32TG230 platform supports energy-saving operation and rapid wake-up behavior, making it appropriate when standby current and responsiveness are more important than maximum compute throughput. Its 32 MHz Cortex-M3 core and timer resources are sufficient for protocol handling, digital control, sampling, and supervisory tasks. AES availability can also support secure data handling in connected or battery-powered products, subject to the complete device configuration confirmed in the manufacturer documentation. Designers should allocate the 8 KB Flash and 2 KB RAM carefully, especially when downloading firmware, storing calibration data, or buffering samples. The 64-QFN footprint also requires a land pattern designed for fine-pitch assembly, so exposed-pad soldering and board-layout recommendations should follow the manufacturer package drawing. The verified search data does not provide a complete, pin-by-pin electrical pinout or confirmed operating-temperature details. This product record combines manufacturer-family specifications, distributor package and memory data, available pricing information, and same-package replacement analysis. It is intended to help engineers evaluate the EFM32TG230F8-QFN64T for embedded designs while clearly separating verified facts from parameters that still require confirmation.

Angebot Kontakt