Mikrocontroller

Produkte (20.000+)

MC9S08FL8CBM - S08 8-bit MCU 8KB Flash 20MHz DIP-32 | NXP
MC9S08FL8CBM

MC9S08FL8CBM - S08 8-bit MCU 8KB Flash 20MHz DIP-32 | NXP

The NXP Semiconductors MC9S08FL8CBM is an 8-bit microcontroller (MCU) from the S08FL family, featuring an HCS08 core running at up to 20 MHz CPU frequency, 8 KB of on-chip Flash memory, and a wide 4.5 V to 5.5 V operating voltage in a 32-pin DIP (dual in-line package). An 8-bit microcontroller integrates a processor core, program memory, data memory, and input/output peripherals on a single integrated circuit, occupying the entry level of the embedded control hierarchy (MCU -> microcontroller -> semiconductor). The HCS08 (S08) core executes the HC08 instruction set with an added BGND instruction, and 8 KB of Flash provides code storage for simple control loops, timers, and I/O management tasks common in cost-driven designs. Key features include the cost-effective S08FL platform optimized for input/output flexibility, operation across an industrial temperature range of -40C to +85C, and support for the full HC08 instruction set, preserving software familiarity for legacy HC08/S08 designers. The 20 MHz CPU speed enables responsive interrupt handling and fast bit manipulation without the overhead of a 16-bit or 32-bit core. Technically, the S08FL family was positioned by Freescale Semiconductor (now NXP Semiconductors) as a low-cost solution for home appliance control: the 5 V supply range matches directly rectified mains-derived supplies, eliminating voltage regulators in some appliance boards. The DIP-32 package supports through-hole assembly, easing prototyping, repair, and low-volume production. Typical applications include home appliance control boards (washing machines, small kitchen appliances), low-cost industrial I/O modules, and simple consumer electronics requiring flexible general-purpose I/O. The DIP footprint suits repairable, hand-assembled products. Design consideration: this part is listed as End of Life (EOL) by NXP, so new designs should evaluate the S08FL16 variant or plan last-time-buy quantities; verify Flash/RAM sizing headroom before committing. This page synthesizes distributor pricing, lifecycle status, drop-in family alternatives, and sourcing guidance not found on the manufacturer product page alone.

Angebot Kontakt
MC9S08FL8CLC - 8-Bit 20MHz MCU, 8KB Flash | NXP
MC9S08FL8CLC

MC9S08FL8CLC - 8-Bit 20MHz MCU, 8KB Flash | NXP

NXP Semiconductors MC9S08FL8CLC is an 8-bit S08 microcontroller with a maximum clock frequency of 20 MHz, 8 KB of flash memory organized as 8K x 8, and a 32-pin LQFP package measuring 7 mm x 7 mm. The device combines a compact surface-mount footprint with a modest embedded memory configuration, making it suitable for cost-sensitive control systems that require basic digital control, peripheral interaction, and firmware-driven automation. An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, and integrated peripherals on one package. The S08 core belongs to the broader microcontroller hierarchy, which includes embedded processors and microcontrollers used for real-time control. Compared with application-specific controllers, the S08 family provides a general-purpose platform that can implement application logic, monitor inputs, control outputs, and manage communications through its available peripherals. The MC9S08FL8CLC's principal verified characteristics are its S08 instruction set, 8-bit processing width, 20 MHz operating frequency, 8 KB flash memory, 5 V supply designation, and 32-LQFP package. These values make it relevant for compact embedded products that need local control without the memory footprint or processing complexity of a higher-bit MCU. The LQFP package also exposes more I/O than a small leadless package while remaining compatible with conventional leaded PCB assembly processes. The MC9S08FL8CLC is identified by NXP as an End of Life product, so new designs should account for lifecycle constraints, availability uncertainty, and the possibility of last-time-buy treatment. Its 8 KB flash allocation is relatively modest, requiring compact firmware and disciplined memory planning. At the same time, a 20 MHz clock can support time-sensitive control tasks when the firmware execution time, peripheral timing, and interrupt latency are properly evaluated. Typical embedded applications include simple industrial control panels, compact appliance controllers, motor or relay sequencing systems, instrumentation interfaces, LED status and lighting controllers, and small sensor-hub devices. In each case, the MCU serves as the system controller rather than as a high-performance communications processor. The available pin count can support external inputs, outputs, and serial interfaces when the required functions are confirmed against the manufacturer pinout and datasheet. Designers should verify the exact pin assignments, peripheral resources, electrical limits, and programming requirements before layout release. Because the part is end-of-life, production risk should be evaluated alongside software support, second-source availability, and any approved NXP migration path. This page consolidates verified manufacturer and distributor information, lifecycle status, family-level alternatives, and practical design considerations to support sourcing and engineering review.

Angebot Kontakt
MC9S08GB32ACFUE - 8-bit S08 MCU, 40MHz, 32KB Flash | NXP
MC9S08GB32ACFUE

MC9S08GB32ACFUE - 8-bit S08 MCU, 40MHz, 32KB Flash | NXP

The NXP Semiconductors MC9S08GB32ACFUE is an 8-bit S08 microcontroller delivering 40 MHz internal bus clock performance, 32KB of flash memory and 4KB of RAM, housed in a 64-pin LQFP (10x10 mm) package. It operates from a 2.08V to 3.6V supply (2.5V/3.3V typical rails) and provides 56 general-purpose I/O lines for industrial and consumer embedded control. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program flash, RAM, oscillators and peripheral modules such as timers, serial interfaces and analog-to-digital converters. Within the embedded systems hierarchy, the S08 family sits in the general-purpose 8-bit controller class, sitting above simple timer-based MCUs and below 16-bit and 32-bit parts, and forms a complete power-management-friendly embedded control solution when paired with only a decoupling network and reset circuitry. Key features include the S08 CISC core with background debug mode (BDM) for non-intrusive flash programming, 40 MHz bus operation, 32KB (32K x 8) in-system reprogrammable flash, and a wide 2.08V to 3.6V operating supply that supports battery-powered designs. The 64-pin LQFP package exposes up to 56 I/O ports, giving designers extensive parallel control capability in a 10x10 mm surface-mount footprint. Architecturally, the device belongs to NXP's S08 (formerly Freescale HC08 successor) family, which uses an enhanced 68HC08-compatible instruction set, single-wire background debugging, and a rich peripheral set including serial communication interfaces, timers and ADC channels. The industrial temperature grade supports -40C to +85C environments per distributor listings. Typical applications include industrial control panels, appliance and HVAC controllers, motor-driven consumer products, battery chargers and instrumentation front ends where 8-bit cost efficiency, moderate 40 MHz performance and generous I/O count are priorities. A key design consideration: NXP has marked this part NRND (Not Recommended for New Designs), so new designs should evaluate pin-compatible S08 family alternatives while legacy production continues through last-time-buy channels. This page synthesizes distributor inventory data, drop-in alternatives, and NRND lifecycle guidance not found in the manufacturer datasheet.

Angebot Kontakt
MC9S08GB32CFU - 8-bit S08 MCU 32KB Flash 40MHz 64-LQFP | NXP
MC9S08GB32CFU

MC9S08GB32CFU - 8-bit S08 MCU 32KB Flash 40MHz 64-LQFP | NXP

The NXP MC9S08GB32CFU is an 8-bit HCS08 CISC microcontroller with 32KB Flash program memory, 2KB RAM, and a maximum CPU clock of 40MHz, packaged in a 64-pin LQFP (10x10 mm, lead-free, surface-mount). It is part of NXP's S08GB family targeted at industrial embedded control applications requiring USB connectivity, CAN, and a rich peripheral mix on a low-cost 8-bit core. What is an 8-bit microcontroller? An 8-bit MCU is a microprocessor-on-a-chip that processes data in 8-bit chunks, integrating CPU, non-volatile Flash program memory, RAM, and peripherals such as timers, ADC, communication controllers, and I/O. Within the broader taxonomy, the MC9S08GB32CFU sits as: microcontroller → 8-bit MCU → HCS08 family → S08GB sub-family → embedded microcontroller IC. Compared to 32-bit ARM Cortex-M devices, 8-bit HCS08 parts trade raw throughput for deterministic interrupt response, low power, and very small code footprint with a free CodeWarrior toolchain. Key features include an integrated USB 2.0 full-speed device controller, an MSCAN (CAN 2.0A/B) module, two SCI/UART ports, one SPI and one I2C peripheral, an 8-channel 10-bit ADC, multiple timers (TPM1/TPM2), 56 general-purpose I/O pins, and an internal clock generator with an optional crystal oscillator. The HCS08 core executes most instructions in one bus cycle at 40MHz, supporting background debug mode and on-chip in-circuit programming. The architecture uses a von Neumann bus with a 16-bit address space and a 16-bit stack pointer, allowing C-language development. The integrated bandgap reference and on-chip voltage regulator support operation from 2.7V to 5.5V, and the device includes low-power stop and wait modes with peripheral wake-up. The 64-LQFP package exposes the full peripheral set including USB D+/D- and CAN Tx/Rx lines, simplifying two-layer PCB layout for industrial designs. Typical applications include industrial control panels, USB HID peripherals, CAN-based sensor nodes, HVAC controllers, point-of-sale terminals, motor control for small BLDC fans, and battery-powered metering equipment. The combination of USB device, CAN, and a 10-bit ADC makes the part a single-chip solution for fieldbus-connected instruments. When designing with the MC9S08GB32CFU, ensure that the 5V-tolerant pins are not driven above VDD+0.3V and that the USB D+/D- lines are routed with 90-ohm differential impedance. The internal voltage regulator requires a bulk capacitor on the internal regulator output; consult the manufacturer datasheet for BDM connector pinout and background-debug mode usage. This page synthesizes distributor pricing, drop-in S08GB alternatives, and practical design notes not found in a single manufacturer datasheet, helping engineers evaluate the part for both new designs and legacy board refresh projects.

Angebot Kontakt
MC9S08GB32CFUE - S08 8-Bit MCU, 32KB Flash, 40MHz | NXP
MC9S08GB32CFUE

MC9S08GB32CFUE - S08 8-Bit MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08GB32CFUE is an 8-bit S08 family microcontroller with 32 KB of Flash program memory, 2 KB of RAM, and a 40 MHz CPU core, offered in a 64-pin LQFP (10x10 mm) surface-mount package. As a member of NXP's legacy Freescale-derived S08 GB series, the part integrates on-chip peripherals including timers, ADC, I2C, SCI, and SPI communication interfaces for cost-sensitive embedded designs. What is an 8-bit microcontroller? An 8-bit microcontroller is a single-chip computer that processes data in 8-bit-wide chunks through a central processing unit, with embedded Flash for program storage, RAM for runtime variables, and integrated peripherals such as timers, communication controllers, and analog-to-digital converters. MCUs sit inside the broader semiconductor taxonomy as integrated circuits, sub-categorized as microcontrollers (MCUs), and further specified by core architecture (S08), memory size, and package. The S08 core is NXP's proprietary 8-bit instruction set architecture derived from the original Freescale HC08 and HCS08 lineages, optimized for low power and deterministic interrupt response in industrial control applications. Key features of the MC9S08GB32CFUE include 32 KB of on-chip Flash memory organized as 32K x 8, 2 KB of SRAM, up to 56 user I/O pins, a 40 MHz maximum CPU bus frequency, an integrated analog-to-digital converter, multiple serial communication interfaces (SCI/UART, SPI, I2C), a programmable 16-bit timer module, and a low-power stop mode with selective peripheral clock gating. The 64-LQFP package provides ample pin count for external bus and analog signal routing. Architecturally, the S08GB32 uses the HCS08 CPU core with a 3-stage pipeline and a background debug mode (BDM) interface for non-intrusive in-circuit programming and debugging. The Flash memory supports in-application reprogramming with built-in security features, while the internal clock module can operate from an external crystal or an internal reference oscillator. Typical applications for this device include industrial control panels, building automation sensor nodes, white-goods motor controllers, USB-to-UART bridges, and general-purpose embedded control boards. The wide temperature range and robust peripheral set also suit automotive body electronics and consumer appliance controllers. When designing with the MC9S08GB32CFUE, ensure your toolchain supports the HCS08 instruction set (CodeWarrior for S08 or GCC for S08), provide decoupling capacitors adjacent to each VDD/VSS pair, and verify that BDM debugging header access is preserved on the production PCB. Watch the absolute maximum supply voltage (5 V typical, with absolute maximum per datasheet). This page synthesizes distributor stock, drop-in compatible S08 family alternatives, and practical S08GB PCB design notes not found in the standalone manufacturer datasheet.

Angebot Kontakt
MC9S08GB60ACFUE - 8-bit 40MHz 60KB Flash MCU | NXP | LQFP-64
MC9S08GB60ACFUE

MC9S08GB60ACFUE - 8-bit 40MHz 60KB Flash MCU | NXP | LQFP-64

The NXP MC9S08GB60ACFUE is an 8-bit general-purpose microcontroller based on the enhanced HCS08 CISC CPU, delivering a 40 MHz internal bus-clock capability (20 MHz bus per the S08GB datasheet), 60 KB of FLASH program memory, and 4 KB of RAM in a 64-pin LQFP (10x10 mm) surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, and peripheral functions such as timers, serial interfaces, and analog-to-digital converters. Within the embedded-systems hierarchy, the S08GB60 belongs to the HCS08 family of the broader MC9S08 / Freescale-NXP 8-bit MCU lineage, positioned for cost-sensitive embedded control where CAN networking and moderate analog integration are required on a single device. Key features include the integrated CAN 2.0 A/B controller (msCAN), two SCI (UART) interfaces, an SPI interface, an 8-channel 10-bit ADC, an internal oscillator option that reduces external component count, and an operating supply range of 1.8 V to 3.6 V. Per the NXP product page, the device integrates CAN, SPI, and SCI interfaces and was designed for automotive and industrial control applications. The HCS08 core uses a CISC architecture with a rich instruction set, background debug mode (BDM) for non-intrusive flash programming and debugging, and low-power wait and stop modes. The 10-bit ADC supports sequential conversions across 8 multiplexed channels, suitable for sensor front-ends such as throttle position, temperature, and battery-voltage monitoring. The on-chip flash supports in-circuit reprogramming through the single-wire background debug interface. Typical applications include automotive body electronics and gateway nodes, industrial control systems, motor control auxiliaries, and CAN-networked sensor modules, where the msCAN block provides a standards-based serial network without an external CAN controller. Design consideration: this part is NRND (Not Recommended for New Designs) per NXP, so new designs should evaluate successor devices; existing designs should secure last-time-buy stock or qualify a drop-in family variant. The 1.8 V to 3.6 V supply range requires a regulated rail with adequate decoupling on all VDD/VSS pairs. This page synthesizes distributor availability data, datasheet-derived specifications, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
MC9S08GB60CFU - 8-Bit 40MHz HCS08 MCU 60KB Flash | NXP | 64-LQFP
MC9S08GB60CFU

MC9S08GB60CFU - 8-Bit 40MHz HCS08 MCU 60KB Flash | NXP | 64-LQFP

The NXP MC9S08GB60CFU is an 8-bit HCS08-family microcontroller (MCU) running at up to 40 MHz internal bus frequency, integrating 60 KB of Flash program memory and 4 KB of RAM on-chip, housed in a 64-pin LQFP package (10 mm x 10 mm body, gull-wing lead form, industrial temperature grade). It is part of the Freescale-origin MC9S08GB60 series, which also includes the GB32, GT60, GT32, and GT16 derivatives. An 8-bit microcontroller is a single-chip computer built around an 8-bit data-path CPU, ROM/Flash for program storage, RAM for working data, and a mix of timers, communication peripherals (SCI/SPI/IIC), and analog blocks. The HCS08 core is a CISC architecture descended from the Motorola/Freescale HC08, adding a background debug controller (BDC), hardware breakpoint, and improved instruction efficiency. In the broader taxonomy, the MC9S08GB60CFU sits under microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key differentiating specifications include a 40 MHz maximum bus frequency, 60 KB Flash, 4 KB RAM, an 8-channel 10-bit ADC, multiple timers (TPM1/TPM2), SCI, SPI, and IIC peripherals, plus a low-power STOP/WAIT mode with internal 1 kHz low-power oscillator for wake-up. The on-chip Flash supports in-application programming and security lock, while the integrated COP watchdog and LVD improve system reliability. The 64-LQFP package offers 56 general-purpose I/O lines and a 10 mm x 10 mm body that fits standard industrial layouts. Technically, the device uses a 2.7 V to 5.5 V supply, an internal clock generator (ICG) with self-clocked mode at approximately 8 MHz out of reset (using the FLL for higher frequencies), and an external crystal/oscillator option. The HCS08 core executes most instructions in 1-2 bus cycles, giving effective throughput of roughly 20-40 MIPS at 40 MHz. The 10-bit ADC has 8 input channels and supports both single-ended conversion and software-triggered scan modes. Typical applications include industrial control panels, appliance white-goods control boards (washing machines, dishwashers, microwave ovens), HVAC control modules, motor control front-ends for low-voltage BLDC drivers, building automation sensor nodes, and consumer electronic mainboards that benefit from a small footprint, low BOM cost, and proven long-term NXP/Freescale supply. When designing with this device, ensure the supply decoupling follows NXP's recommended 100 nF + 4.7 uF + bulk cap layout. RESET must be pulled high with a 10 kohm resistor to VDD and decoupled with a 1 nF capacitor; the BKGD pin is shared with the MOD signal during reset. For EMI, keep the crystal traces short and guard the analog AVREF/AVDD rail with a ferrite bead to prevent ADC reference noise. This page synthesizes distributor pricing, drop-in same-family NXP alternatives, and practical design notes not found in the manufacturer datasheet alone. Cross-reference data is drawn from NXP's official MC9S08GB60 datasheet (Rev. 2.3, 12/2004), DigiKey, Mouser, and Octopart listings.

Angebot Kontakt
MC9S08GB60CFUE - 8-bit HCS08 MCU, 60KB Flash, 40MHz | NXP
MC9S08GB60CFUE

MC9S08GB60CFUE - 8-bit HCS08 MCU, 60KB Flash, 40MHz | NXP

The NXP MC9S08GB60CFUE is an 8-bit HCS08 family microcontroller featuring 60KB of Flash program memory, 4KB of RAM, and a 40MHz CPU core, housed in a 64-pin LQFP package (10x10 mm). Built on NXP's S08 CISC architecture, it delivers up to 56 general-purpose I/O lines and integrates peripherals including timers, ADC, SCI/SPI/I2C communication interfaces, and a real-time counter. An 8-bit microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces on one die. The HCS08 family is NXP's (formerly Freescale's) low-power 8-bit core architecture positioned between 4-bit basic controllers and 32-bit ARM Cortex-M devices in the embedded hierarchy. Within the broader taxonomy, the MC9S08GB60CFUE sits at: microcontroller -> 8-bit MCU -> HCS08 family -> GB60 sub-family (high-pin-count Flash variant) -> embedded system-on-chip. This positioning makes it suitable for cost-sensitive, low-power applications that require moderate computational throughput. Key specifications include 60KB (60K x 8) of on-chip Flash for program storage, 4KB of RAM for runtime data, a 40MHz bus clock derived from an internal oscillator or external crystal, and an operating voltage range of 2.5V to 3.3V (with 5V-tolerant I/O on selected pins). The integrated peripherals reduce BOM count by eliminating external ADC, communication controllers, and timer ICs. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer and 16-bit index registers (H:X), enabling efficient C-language compilation despite the 8-bit data path. Background debug mode (BDM) is built into every S08 device, allowing non-intrusive in-circuit programming and debugging without requiring a special bond-out version of the chip. Typical applications include home appliances (washing machines, microwave ovens, induction cookers), industrial control (sensor nodes, motor drive controllers), automotive body electronics (door modules, seat controllers), consumer electronics (remote controls, toys), and USB human-interface devices. The 64-pin LQFP package with 56 I/O pins provides generous pin budget for multi-interface products. When designing with this device, ensure your linker script correctly partitions the 60KB Flash into boot, application, and EEPROM-emulation regions. The internal bandgap reference should be enabled for accurate ADC readings at temperatures below -10C, and decoupling capacitors (100nF plus 4.7uF bulk) must be placed within 5mm of the VDD pins.

Angebot Kontakt
MC9S08GT16ACFCE - 40MHz HCS08 8-bit MCU, 16KB Flash | NXP
MC9S08GT16ACFCE

MC9S08GT16ACFCE - 40MHz HCS08 8-bit MCU, 16KB Flash | NXP

The NXP MC9S08GT16ACFCE is a cost-effective, high-performance 8-bit microcontroller built on the enhanced S08 core, delivering up to 40 MHz CPU clock speed with 16 KB Flash program memory and 2 KB RAM in a 32-HVQFN (5x5) package. It supports supply voltages from 1.8 V to 3.6 V and operates across an industrial temperature range of -40C to +85C, making it suitable for cost-sensitive embedded designs. The part integrates 34 I/O ports, a 10-channel 12-bit ADC, two SCI/UART ports, one SPI, and one I2C interface, providing the connectivity required for sensor aggregation and peripheral control. An 8-bit MCU (microcontroller unit) is a self-contained computing element that integrates a CPU, non-volatile program memory, working RAM, and a rich mix of analog and digital peripherals onto a single silicon die. The MC9S08GT16ACFCE belongs to the S08GT family of low-cost, high-performance general-purpose microcontrollers from NXP. Within the broader taxonomy, an MCU is a sub-class of microcontroller -> microprocessor -> semiconductor -> integrated circuit. The S08 family succeeds the legacy HC08 core while preserving the original HC08 instruction set and adding the BGND instruction for background-debug-mode support, which simplifies in-circuit development and flash programming. Key features include 16 KB of Flash memory (16K x 8), 2 KB of SRAM, an internal clock source with trim, low-voltage detect (LVD), power-on reset (POR), pulse-width modulation (PWM) channels, a programmable watchdog timer (WDT), and software-selectable pull-ups on all port pins when configured as inputs. The 40-MHz bus frequency delivers 20 MHz effective instruction throughput with the S08's 2-cycle architecture, supporting up to 32 interrupt/reset sources and rapid context switching. The 32-HVQFN package with exposed thermal pad provides a compact footprint (5x5 mm) suitable for high-density PCB designs and offers good thermal dissipation for industrial environments. Architecturally, the HCS08 core executes the HC08 instruction set with an enhanced bus structure, allowing single-cycle access to on-chip peripherals and Flash memory. The integrated voltage regulator supports wide operating voltages while maintaining low quiescent current, and the on-chip clock generator can be trimmed via a factory-stored value. These characteristics make the MC9S08GT16ACFCE well-suited for battery-powered and energy-conscious applications. Typical applications include home appliances, white goods control boards, industrial sensor nodes, simple motor control loops, and consumer-electronics user-interface modules where deterministic 8-bit performance, generous Flash, and a small QFN footprint outweigh the need for a 32-bit processor. The wide operating voltage range also supports direct connection to single-cell lithium or multi-cell alkaline battery stacks. Designers should plan adequate decoupling near the VDD pins and route the exposed pad of the HVQFN package to a solid ground copper pour for thermal and electrical performance. The internal LVD and POR circuits handle brownout and power-on sequencing automatically, reducing external component count. This page synthesizes distributor availability, parametric specifications, and drop-in alternatives not always collocated on the manufacturer product page - enabling faster design and sourcing decisions for the MC9S08GT16ACFCE.

Angebot Kontakt
MC9S08GT16ACFDE - 8-bit S08 MCU 16KB Flash 40MHz | NXP
MC9S08GT16ACFDE

MC9S08GT16ACFDE - 8-bit S08 MCU 16KB Flash 40MHz | NXP

The NXP Semiconductors MC9S08GT16ACFDE is an 8-bit S08 microcontroller with 16KB (16K x 8) Flash memory, 2KB RAM, and a 40MHz S08 core, housed in a 48-pin QFN with exposed pad (7x7 mm) package. It belongs to the cost-effective, high-performance MC9S08GT family of general-purpose 8-bit MCUs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. In the system hierarchy, the MCU sits at the top of embedded control electronics, replacing combinations of discrete logic and analog control circuits with programmable firmware. The S08 family is NXP's (formerly Freescale Semiconductor) enhanced evolution of the classic 68HC08 architecture. Key features of the MC9S08GT16ACFDE include the enhanced S08 core executing at up to 40MHz bus frequency, 16KB of in-system-programmable Flash allowing field firmware updates, and 2KB of on-chip RAM for runtime data. The QFN-48-EP (7x7 mm) surface-mount package with exposed pad provides good thermal and electrical performance for compact industrial boards. Architecturally, the S08 core uses an enhanced CISC instruction set with background debugging mode (BDM), enabling non-intrusive in-circuit debugging without consuming on-chip resources. The GT family shares modules and development tooling across memory variants (GT8A, GT16A, GT32A), simplifying firmware porting when memory requirements change. Typical applications include consumer appliance control, battery chargers, lighting control, small industrial automation nodes, and low-cost human-interface systems where 16KB of code space and moderate processing performance are sufficient. Design consideration: this part is End of Life (EOL) per the NXP product page. New designs should evaluate the in-family drop-in alternatives below or an active successor family before committing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
MC9S08GT16AMFBE - 8-bit HCS08 MCU 16KB Flash 40MHz QFP-44 | NXP
MC9S08GT16AMFBE

MC9S08GT16AMFBE - 8-bit HCS08 MCU 16KB Flash 40MHz QFP-44 | NXP

The NXP MC9S08GT16AMFBE is a cost-effective, high-performance 8-bit microcontroller built on the HCS08 CPU core, featuring 16KB of on-chip Flash, 2KB of RAM, and a 40 MHz maximum bus frequency, housed in a 44-pin LQFP (QFP) package. It integrates multiple serial interfaces including I2C, SCI, and SPI, and offers a rich peripheral set including Low-Voltage Detect (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM) modules, and a Watchdog Timer (WDT) for reliable embedded control. The device operates from a 1.8V to 3.6V supply rail and supports up to 36 general-purpose I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable I/O peripherals. The HCS08 family is NXP's (formerly Freescale's) line of 8-bit microcontrollers built on an enhanced HC08 instruction set with the added BGND instruction, optimized for low-power, cost-sensitive embedded control. Within the broader semiconductor taxonomy, an MCU belongs to the class of microcontrollers -> microcomputers -> integrated circuits -> semiconductors, and the HCS08 family specifically targets cost-effective general-purpose applications with low-power modes (including Stop 2 and Stop 3 with auto-wake-up at 20 nA typical). Key features of the MC9S08GT16AMFBE include an on-chip 8-channel 10-bit ADC for analog signal acquisition, multiple timer/PWM channels for motor and lighting control, software-selectable pull-ups on port inputs to reduce BOM cost, and support for up to 32 interrupt sources. Its 40 MHz internal bus clock provides ample headroom for protocol stacks such as LIN or UART-based sensor interfaces. The HCS08 core retains backward compatibility with HC08 code, easing migration from legacy Freescale designs. Typical applications span white goods and home appliances, HVAC controllers, small motor control, low-end security keypads, sensor hubs, and battery-powered consumer devices. The wide 1.8V to 3.6V supply range enables direct Li-ion battery operation, while the low-power Stop modes extend battery life in intermittent-duty products. When designing with this MCU, ensure adequate decoupling (typically 100 nF + 10 uF near VDD) and that the BKGD/MS pin is reserved for in-circuit debug/programming. Watchdog servicing must be implemented for safety-critical applications. This page consolidates distributor pricing, drop-in alternatives, and design notes that are not available from the manufacturer datasheet alone.

Angebot Kontakt
MC9S08GT16AMFCE - 40MHz 8-bit S08 MCU 16KB Flash | NXP Semiconductors
MC9S08GT16AMFCE

MC9S08GT16AMFCE - 40MHz 8-bit S08 MCU 16KB Flash | NXP Semiconductors

The NXP Semiconductors MC9S08GT16AMFCE is an 8-bit microcontroller from the HCS08 family, integrating a 16 KB Flash program memory, 40 MHz S08 enhanced core, and an automotive-grade peripheral set in a 32-pin HVQFN (5x5 mm) package. It targets cost-sensitive embedded control in automotive and industrial systems where small footprint and low pin count are required. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on one silicon die. The 8-bit data path makes MCUs of this class well suited to bit-level control, sensor I/O, and protocol bridging tasks where higher-end 32-bit cores would be wasteful. The S08 is NXP's enhanced 8-bit HCS08 architecture succeeding the legacy HC08 and adding a background debug mode (BDM) and improved instruction set. Key features of the MC9S08GT16AMFCE include 16 KB Flash program memory, 2 KB RAM, a 10-bit ADC, up to 24 general-purpose I/O pins, and serial connectivity through I2C, SCI (UART), and SPI. Integrated peripherals include low-voltage detect (LVD), power-on reset (POR), multiple PWM channels, and a watchdog timer (WDT). The MCU operates from 1.8 V to 3.6 V across an automotive temperature range of -40C to +125C, and is qualified to AEC-Q100 for in-vehicle use. Architecturally, the S08 core executes most instructions in one bus cycle and supports a BDM interface for non-intrusive debug. The 40 MHz bus clock yields roughly 20 MIPS at 5 V operation, which is enough for sensor-fusion pre-processing, motor-control loop execution, and LIN node stacks. The 32-pin HVQFN footprint keeps the part usable in compact modules such as seat controllers, BCM satellite nodes, and HVAC flap drivers. Typical applications include automotive body electronics (door modules, mirror control, RKE receivers), LIN slave nodes, industrial sensor interfaces, white-goods motor control, and low-cost user-interface boards. The integrated 10-bit ADC simplifies analog front-end designs, while the multiple PWM channels handle brushed DC motor or LED dimming tasks. When designing with the MC9S08GT16AMFCE, ensure decoupling is placed within 5 mm of the supply pins and that the RESET pin is pulled high through 10 kohm for clean power-on behavior. The BDM interface is required for in-circuit programming and debug; leave access to BKGD and DEBUG pins on production boards to ease field updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with the context needed to make a fast, informed sourcing decision.

Angebot Kontakt
MC9S08GT16AMFDE - 8-bit S08 MCU, 16KB Flash, 40MHz, QFN-48 | NXP
MC9S08GT16AMFDE

MC9S08GT16AMFDE - 8-bit S08 MCU, 16KB Flash, 40MHz, QFN-48 | NXP

The NXP Semiconductors MC9S08GT16AMFDE is an 8-bit S08 (HCS08) general-purpose microcontroller IC running at up to 40 MHz with 16 KB (16K x 8) of Flash program memory and 2 KB of RAM, housed in a 48-pin VFQFN exposed-pad (7x7 mm) package. An 8-bit microcontroller is an integrated circuit that contains a processor core, memory, and peripherals on a single chip, executing one byte of data per instruction cycle. Within the power-management and embedded-control hierarchy, the MC9S08GT16A belongs to the MC9S08GT family of cost-effective, high-performance S08 general-purpose MCUs from NXP (formerly Freescale Semiconductor), positioned above smaller 8K devices and below larger 32K/60K family members. Key features include the 40 MHz HCS08 CPU with HC08 instruction set compatibility plus an added BGND instruction, support for up to 32 interrupt/reset sources, software-selectable pullups on ports when used as inputs, and a wide 1.8V to 3.6V single-supply operating range. The 16 KB Flash supports in-application reprogramming, and the 48-QFN-EP package with exposed pad provides good thermal and grounding performance in a compact 7x7 mm footprint. Architecturally, the S08 core is an enhanced derivative of the HC08 core, offering backward code compatibility while improving interrupt handling and adding debug instructions. The device integrates Flash, RAM, and standard S08 peripheral modules on a single die, reducing system BOM count for cost-sensitive embedded designs. The automotive temperature grade (per Partstack package data: HVQCCN square no-lead package) extends use into harsher environments. Typical applications include automotive body electronics and accessories, industrial control panels, consumer appliance control, low-cost motor control, and system monitoring where an 8-bit MCU with modest Flash (16 KB) is sufficient. When designing with this device, plan the supply network for the 1.8V to 3.6V range and verify Flash density against code growth, since 16 KB is fixed per orderable part number. The exposed pad should be soldered to a ground pour for best electrical and thermal performance. This page synthesizes distributor stock data, cross-reference comparisons, drop-in alternatives, and practical design guidance not found in any single datasheet or distributor listing.

Angebot Kontakt
MC9S08GT16CFBE - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08GT16CFBE

MC9S08GT16CFBE - 8-Bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP (Freescale Semiconductor) MC9S08GT16CFBE is an 8-bit S08 (HCS08) general-purpose microcontroller with a CISC core running at up to 40 MHz bus clock, 16 KB of Flash program memory, 2 KB of on-chip RAM, and a 10-bit ADC, housed in a 44-pin QFP (10x10 mm) surface-mount package. The BE suffix denotes the industrial temperature range and the C suffix denotes the 44-pin QFP package. An 8-bit microcontroller integrates a processor core, memory, and peripherals on a single chip, forming the lowest tier of the embedded MCU hierarchy (MCU -> embedded processor -> system-on-chip). The S08 family succeeded the popular 68HC08 architecture, offering enhanced debugging (background debug mode), lower power modes, and richer peripherals while preserving CISC code compatibility. MCUs of this class typically run at CPU frequencies of tens of MHz and serve cost-sensitive embedded control tasks. Key features of the MC9S08GT16CFBE include 16 KB (16K x 8) of in-circuit programmable Flash, 2 KB of RAM, I2C, SCI (UART), and SPI serial interfaces, an 8-channel 10-bit analog-to-digital converter, and on-chip system protection functions including low-voltage detection (LVD), power-on reset (POR), a computer operating properly (COP) watchdog, and PWM capability. The part operates from a 2.5 V or 3.3 V supply per distributor specifications. Architecturally, the enhanced S08 core executes the HC08 instruction set with a background debug module (BDM) allowing non-intrusive flash programming and real-time debugging over a single-wire interface. Multiple low-power stop and wait modes make it suitable for battery-conscious designs, and the flash memory supports in-application reprogramming for field updates. Typical applications include industrial control and automation, consumer appliance control panels, HVAC system controllers, battery chargers, and low-cost human-machine interfaces where 16 KB of code space and rich serial connectivity are sufficient. When designing with this MCU, note that it is a legacy device: NXP has discontinued it and production today is handled by Rochester Electronics under authorized continuity, so new designs should evaluate the MC9S08GT16A successor family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
MC9S08GT16CFD - 8-Bit 40MHz 16KB Flash MCU | NXP
MC9S08GT16CFD

MC9S08GT16CFD - 8-Bit 40MHz 16KB Flash MCU | NXP

The NXP Semiconductors MC9S08GT16CFD is an 8-bit S08 microcontroller operating at up to 40 MHz, with 16 KB of flash memory, in a 48-QFN-EP 7 x 7 mm package. The verified distributor record identifies the device as an S08 microcontroller with 16K x 8 flash organization and an exposed-pad package. It is suited to embedded control, industrial automation, consumer equipment, and connected products requiring real-time control with integrated flash-based firmware storage. An S08 microcontroller is an 8-bit embedded microcontroller in the broader hierarchy of embedded processors, microcontrollers, and semiconductors. It executes firmware from flash memory and provides general-purpose I/O, interrupt handling, timers, communications interfaces, and analog or timing resources depending on the device variant. The MC9S08GT16CFD family is intended for designs that need deterministic embedded control rather than a high-level application processor. The principal verified characteristics are an 8-bit CPU, 40 MHz maximum operating frequency, and 16 KB flash memory. The package is a 48-terminal no-lead square QFN with an exposed pad, identified by package code HVQCCN in distributor data. The S08 instruction set includes the BGND instruction according to the retrieved technical description, and the device supports up to 32 interrupt or reset sources. Software-selectable port pullups and internal pullups on RESET and IRQ are also identified as design features. The 40 MHz clock rate provides useful processing headroom for control loops, protocol servicing, and supervisory logic, while the 16 KB flash capacity supports compact firmware. The exposed-pad package improves board-level heat spreading when used with a properly designed thermal pad and copper area, but final thermal performance depends on PCB construction, copper area, airflow, and the actual operating condition. Typical application domains include industrial control modules, motor or actuator supervisory circuits, building and access-control equipment, consumer appliances, instrumentation, and low-cost embedded nodes. Selection should begin with the verified 40 MHz performance, 16 KB flash requirement, S08 software compatibility, and the exact 48-QFN-EP footprint. Place the decoupling network close to the supply pins and preserve the exposed-pad land pattern and thermal-via layout specified by the manufacturer package documentation. Confirm pin functions, voltage limits, peripheral availability, programming requirements, and lifecycle status against the current NXP datasheet before releasing a production design. This page consolidates verified distributor specifications, package information, sourcing references, and engineering guidance for engineers comparing the MC9S08GT16CFD with other embedded-control solutions. It does not infer undocumented electrical limits or claim a drop-in replacement unless the manufacturer footprint and pinout have been independently confirmed.

Angebot Kontakt
MC9S08GT16CFDR2 - 20MHz 8-Bit Flash MCU | NXP Semiconductors
MC9S08GT16CFDR2

MC9S08GT16CFDR2 - 20MHz 8-Bit Flash MCU | NXP Semiconductors

The NXP Semiconductors MC9S08GT16CFDR2 is an 8-bit HCMOS flash microcontroller operating at 20 MHz in a 48-terminal no-lead square QFN package with an exposed pad. The verified source data identifies an industrial-grade embedded processor and controller, while detailed flash, SRAM, peripheral, voltage, and timer specifications were not supplied. The MCU belongs to the MC9S08GT general-purpose S08 family and is designed for embedded control designs requiring an 8-bit processor, integrated nonvolatile program memory, and a compact surface-mount footprint. A microcontroller is an integrated circuit that combines a processor core, memory, and peripheral functions into one device used to read inputs, execute control logic, and drive outputs. MC9S08GT16CFDR2 is specifically positioned within the S08 family, whose enhanced 8-bit architecture targets cost-effective, high-performance general-purpose embedded control. Its hierarchy is microcontroller → 8-bit microcontroller → S08 microcontroller → MC9S08GT family. The strongest verified specifications are a 20 MHz operating frequency, HCMOS process designation, 8-bit architecture, flash memory, industrial temperature grade, and 48 no-lead square package terminals. The Partstack package code is HVQCCN. Flash integration supports firmware retention in an embedded design, although the exact flash capacity and programming specifications were not provided and must be confirmed from the MC9S08GT16 manufacturer datasheet before firmware-bank or boot-loader planning. The supplied family result identifies MC9S08GT16A variants as cost-effective, high-performance S08 general-purpose 8-bit microcontrollers using the enhanced S08 core. It also states that the GT family offers multiple modules, memory sizes, and package choices. These family characteristics make the device applicable to industrial controllers, communication modules, human-interface systems, and compact embedded products, subject to verification of the exact peripherals and interfaces in the MC9S08GT16 documentation. A critical design consideration is exposed-pad thermal management. Because the package includes an exposed pad, the PCB thermal design must provide adequate copper and via connectivity, while power and ground pins must follow the exact manufacturer land pattern and pinout. Do not assume the exposed pad is interchangeable with a normal signal pin; consult the manufacturer pin assignment and recommended footprint before layout release. This page consolidates the verified distributor descriptions, package identity, family positioning, sourcing links, and replacement-evaluation constraints into one engineering reference. It also distinguishes confirmed facts from missing data so engineers can identify the MC9S08GT16CFDR2 quickly and proceed to authoritative pinout, memory, electrical, lifecycle, and pricing validation before design commitment.

Angebot Kontakt
MC9S08GT32ACBE - 8-Bit S08 MCU, 32KB Flash, 40MHz | NXP
MC9S08GT32ACBE

MC9S08GT32ACBE - 8-Bit S08 MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08GT32ACBE is an 8-bit microcontroller from the S08 family featuring a 40 MHz enhanced S08 core, 32 KB of on-chip Flash, 4 KB of RAM and a 42-pin PDIP package targeted at cost-sensitive general-purpose embedded designs. The 'GT' suffix denotes the general-purpose tier of the MC9S08 family and integrates rich on-chip peripherals including timers, ADC, and serial communication interfaces suitable for consumer, industrial and appliance control. An 8-bit microcontroller (MCU) is a microprocessor core with an 8-bit data path, internal program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, analog-to-digital converters, and communication ports. Within the broader semiconductor taxonomy, an MCU is a sub-class of microprocessors belonging to the embedded processor hierarchy, falling under Integrated Circuits > Microcontrollers. The S08 core is an enhanced version of the original HC08 architecture, offering improved instruction set efficiency and lower power consumption than legacy 5V designs. Key features of the MC9S08GT32ACBE include 32 KB Flash program memory, 4 KB RAM, an internal bus speed up to 40 MHz (20 MHz bus), an integrated multi-channel ADC, multiple timer modules (TPM), and serial interfaces (SCI/SPI/IIC). The 42-pin PDIP package supports through-hole assembly for prototyping, hobby projects, legacy board replacements and industrial control panels where a socketed or hand-soldered solution is preferred over surface mount. The device is built on a 0.25 µm CMOS process with a wide operating voltage range of 2.7V to 5.5V, supporting both 3.3V and 5V system designs. Its low-power modes (wait, stop3) make it suitable for battery-powered and energy-conscious applications. Compared to legacy HC08 parts, the S08 core adds BGND instruction for debug access and improved indexing modes, while preserving binary compatibility with most HC08 instruction patterns. Typical applications include appliance controls (washing machines, microwave ovens, HVAC), industrial sensor interfaces, low-end consumer electronics, smart metering peripherals, motor control BLDC driver boards, and educational/development kits. The 32 KB Flash is sufficient for state-machine firmware, small RTOS kernels, or fixed-function control loops. Design considerations: place decoupling capacitors (100 nF plus 4.7 µF bulk) close to VDD/VSS pins, use the integrated voltage regulator with proper bulk capacitance, and respect the absolute maximum ratings of -0.3V to +6V on digital pins. The 42-pin PDIP footprint requires through-hole plating or socketed headers. This page synthesizes distributor pricing, drop-in NXP same-family alternatives (including the 44-QFP package variant) and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
MC9S08GT32ACFBE - 8-bit S08 MCU 40MHz 32KB Flash | NXP
MC9S08GT32ACFBE

MC9S08GT32ACFBE - 8-bit S08 MCU 40MHz 32KB Flash | NXP

The NXP Semiconductors MC9S08GT32ACFBE is an 8-bit HCS08 general-purpose microcontroller with a 40 MHz CPU, 32 KB (32K x 8) Flash memory, 4 KB RAM, and 2.5V/3.3V operation, housed in a 44-pin PQFP (44-QFP, 10x10 mm) surface-mount package supplied in trays. An 8-bit microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial communication interfaces, and analog-to-digital converters. Within the power-management hierarchy of embedded systems, a general-purpose MCU sits at the control layer, executing application firmware to manage sensors, actuators, and communication in a product. The MC9S08GT family belongs to NXP's (formerly Freescale) S08 architecture, an enhanced successor to the HC08 instruction set. Key features of the MC9S08GT32ACFBE include the enhanced HCS08 CPU core with the added BGND instruction, support for up to 32 interrupt/reset sources, software-selectable pull-ups on ports when used as inputs, and a supply voltage range of 1.8 V to 3.6 V per parametric listings. The CISC core executes HC08-compatible code, easing migration from legacy HC08 designs. On-chip Flash allows in-circuit reprogramming, and the 4 KB RAM provides working memory for protocol stacks and control loops. Technically, the device integrates typical S08GT modules such as the serial peripheral interface (SPI), serial communications interface (SCI), IIC bus, and timer/PWM modules, along with a 10-bit ADC, enabling single-chip designs that previously required external components. The 40 MHz internal bus-clock capability supports computationally demanding 8-bit tasks while retaining the low power modes expected of the family. Typical applications include industrial control panels, consumer appliance interfaces, motor control helpers, battery chargers, and legacy HC08 upgrade paths where code compatibility and cost are priorities. A key design consideration: this part is listed by NXP as End of Life, so new designs should evaluate family alternatives or plan last-time-buy inventory; existing designs should verify PCN notices from NXP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference. Pricing references are as of 2026-10-18.

Angebot Kontakt
MC9S08GT32ACFBER - 8-bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08GT32ACFBER

MC9S08GT32ACFBER - 8-bit S08 MCU 32KB Flash 40MHz | NXP

The NXP Semiconductors MC9S08GT32ACFBER is an 8-bit general-purpose microcontroller based on the enhanced HCS08 core, delivering 32 KB of flash program memory, 4 KB of RAM, and a maximum bus operation of 40 MHz, housed in a 44-pin QFP (S-PQFP-G44) gull-wing surface-mount package. An 8-bit microcontroller is an integrated circuit that combines a processor core, memory, and peripherals such as timers, ADC, and serial interfaces on a single chip, forming the lowest tier of the microcontroller hierarchy (MCU -> embedded processor -> semiconductor). The S08 family descends from the HC08 architecture, retaining CISC instruction-set compatibility while adding the BGND background-debug instruction, which simplifies in-circuit debugging through a single-wire background debug interface. Key features of the MC9S08GT32ACFBER include up to 32 interrupt/reset sources, software-selectable internal pullups on port pins when configured as inputs, integrated PWM channels, an 8-channel 10-bit ADC, and serial communication interfaces including SCI (UART), SPI, and IIC. The industrial temperature grade supports demanding factory and automotive-adjacent environments. Architecturally, the device uses a CMOS process with low-power wait and stop modes, making it suitable for battery-conscious designs. Flash memory supports in-circuit programming and erase, enabling field firmware updates without socketed parts. The internal oscillator option reduces external component count and bill-of-materials cost. Typical applications include industrial control systems, consumer appliances, motor control and lighting control, and legacy HC08 design migrations where 32 KB of flash and rich timer resources are required. Design considerations: the supply voltage range of 1.8 V to 3.6 V must be respected, and the 44-QFP footprint requires attention to decoupling capacitor placement on all VDD/VSS pairs. This page synthesizes distributor pricing, drop-in alternatives within the MC9S08GT family, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-18.

Angebot Kontakt
MC9S08GT32ACFDE - 40MHz 32KB 8-Bit MCU | NXP | Embedded
MC9S08GT32ACFDE

MC9S08GT32ACFDE - 40MHz 32KB 8-Bit MCU | NXP | Embedded

The NXP Semiconductors MC9S08GT32ACFDE is an 8-bit S08 general-purpose microcontroller operating at up to 40 MHz, with 32 KB of flash memory and 4 KB of RAM, housed in a 48-pin QFN exposed-pad package. Its operating supply range is 1.8 V to 3.6 V, and it provides 34 I/O ports for compact embedded-control designs. An S08 microcontroller is an 8-bit embedded controller combining a processor core, program memory, data memory, I/O, interrupts, timers, and communication peripherals on one semiconductor die. It belongs to the MCU hierarchy: microcontroller -> embedded processor -> semiconductor. The enhanced S08 instruction set supports efficient control-oriented firmware, while on-chip flash permits field-updatable application code without an external memory device. Key verified features include a 40 MHz maximum clock, 32 KB of flash, 4 KB of RAM, 34 I/O ports, and support for up to 32 interrupt or reset sources. The 1.8 V to 3.6 V supply range accommodates low-voltage digital systems, while software-selectable input pullups support robust digital interfaces. The 48-QFN-EP package supports surface-mount assembly and uses an exposed pad for board-level thermal management. The MCU combines conventional parallel GPIO with embedded serial and timing resources, making it suitable for control boards, human-interface systems, communication modules, and compact industrial products. Exact peripheral assignments, interrupt vectors, electrical limits, and timer details should be confirmed in the manufacturer data sheet before schematic or firmware release. Typical uses include motor and actuator sequencing, panel controls, sensor aggregation, keypad interfaces, programmable logic controllers, and communication equipment. At 40 MHz, the device offers useful processing headroom for interrupt servicing, protocol handling, and simultaneous control tasks without requiring a higher-bit architecture. PCB design should route the exposed thermal pad to a solderable copper plane and follow the manufacturer's land pattern, decoupling, and assembly guidance. Confirm the exact exposed-pad dimensions and pin mapping from the official package drawing; those details were not included in the supplied search extracts. This page consolidates NXP lifecycle information, distributor specifications, available sourcing links, and drop-in replacement research. It distinguishes verified facts from unverified package, pin-level, pricing, and compliance details so engineers can make an informed sourcing decision.

Angebot Kontakt
MC9S08GT32ACFDER - 8-Bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08GT32ACFDER

MC9S08GT32ACFDER - 8-Bit S08 MCU 32KB Flash 40MHz | NXP

The NXP MC9S08GT32ACFDER is an 8-bit S08 family microcontroller integrating 32KB of Flash program memory and 2KB of RAM, executing at up to 40MHz, and packaged in a 48-pin QFN-EP (7x7 mm). The die targets cost-sensitive embedded applications that demand deterministic performance, low power, and integrated peripherals in a small surface-mount footprint. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The HCS08/S08 core from NXP is a CISC 8-bit architecture that has powered automotive body electronics, white goods, and industrial sensor nodes for over a decade. Within the broader semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> semiconductor device. The GT-series MCUs specifically target general-purpose 8-bit designs where footprint, BOM count, and peripheral integration dominate the design trade-off. Key features include 32KB (32K x 8) of embedded Flash with in-application programmability, 2KB of RAM, 39 general-purpose I/O lines, and an internal bus clock of up to 40MHz derived from the on-chip FLL. Integrated peripherals include PWM channels, an LVD (low-voltage detect) and POR (power-on reset), a watchdog timer (WDT), and communication interfaces (I2C, SCI, SPI). The 48-QFN-EP package exposes a thermal pad that reduces junction-to-ambient thermal resistance, improving continuous high-current I/O operation. Operating voltage spans 2.7V to 5.5V with industrial temperature grade support. The architecture relies on the S08 CISC core with a single 16-bit index register, HX, plus a 16-bit stack pointer. The Flash controller supports byte-erase and security features; the on-chip clock module supports an internal reference and external crystal, enabling flexible clock-tree design. The 8-bit datapath, 40MHz core clock, and single-cycle bus at half the bus rate give deterministic instruction timing suitable for hard-real-time loops in motor control, lighting, and sensor conditioning. Typical applications include HVAC control boards, appliance user-interface panels, automotive body controllers, battery-powered sensor transmitters, low-end BLDC motor drivers, and LED lighting controllers. Design considerations include providing a 0.1uF decoupling capacitor on each VDD pin, exposing the thermal pad to a continuous copper pour on the top layer for heat spreading, and reserving the reset pin for an external supervisor or RC network when battery-supplied cold-start behavior matters.

Angebot Kontakt
MC9S08GT32CB - 8-Bit 40MHz 32KB Flash MCU | NXP
MC9S08GT32CB

MC9S08GT32CB - 8-Bit 40MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08GT32CB is an 8-bit S08 general-purpose microcontroller operating at up to 40 MHz, with 32 KB of program Flash, 2 KB of RAM, and 34 general-purpose I/O pins in a 42-pin PDIP package. Its combination of an HCS08-compatible CPU core, integrated communication peripherals, and through-hole package makes it suitable for cost-sensitive embedded control, industrial equipment, and legacy system maintenance. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, I/O, and peripherals into one embedded-control component. The S08 family is an 8-bit MCU platform designed for control-oriented products, where deterministic peripherals, modest memory requirements, and simple firmware execution are more important than processor performance for desktop-class workloads. MC9S08GT32CB belongs to the S08 microcontroller hierarchy and provides a compact platform for embedded logic, sensing, communications, and actuator control. Key verified features include a 40 MHz clock, 32 KB Flash program memory, 2 KB of RAM, 34 I/O pins, and support for up to 32 interrupt or reset sources. The device also includes I2C, SCI, and SPI connectivity, along with PWM, watchdog-timer, low-voltage-detection, and power-on-reset peripherals. Software-selectable pullups are available on ports used as inputs, while the RESET and IRQ pins include internal pullups. The S08 CPU uses the HC08 instruction set with the BGND instruction, supporting the MCU's embedded-control architecture. Flash memory permits firmware updates and programmed production quantities without EEPROM, while the available RAM supports working variables, stack operations, communication buffers, and control-loop state. The 42-pin PDIP package provides through-hole assembly compatibility for industrial and legacy PCB designs. Typical uses include motor and actuator controllers, industrial interface modules, instrumentation, communication hubs, sensor nodes, and legacy industrial control systems. When designing around this device, verify the exact pinout, voltage limits, peripheral multiplexing, and timing requirements from the manufacturer datasheet. The CB suffix and package configuration should be confirmed during procurement rather than inferred from other S08 variants.

Angebot Kontakt
MC9S08GT32CFD - 8-Bit 40MHz S08 MCU, 32KB Flash | NXP
MC9S08GT32CFD

MC9S08GT32CFD - 8-Bit 40MHz S08 MCU, 32KB Flash | NXP

The NXP MC9S08GT32CFD is a member of the Freescale/NXP S08 family of 8-bit microcontrollers. It integrates a 40 MHz HCS08 CPU core with the HC08 instruction set (plus the BGND instruction for background debug mode), 32 KB of on-chip Flash program memory, 2 KB of SRAM, and 39 general-purpose I/O pins in a 48-pin QFN-EP (7 mm x 7 mm) package with an exposed thermal pad. In the system hierarchy, this part is an 8-bit microcontroller (MCU) belonging to the larger category of embedded microcontrollers, which in turn falls under the broader family of microprocessors and microcontrollers, then integrated circuits, and ultimately semiconductors. The "S08" prefix denotes the HCS08 CPU core, a successor to the long-standing HC08 core, offering improved instruction efficiency, better debug support (Background Debug Mode via the BKGD pin), and lower power consumption while preserving the HC08 instruction set for code compatibility. Key features include 32 KB of Flash memory, 2 KB of RAM, integrated peripherals such as PWM, an analog-to-digital converter (ADC), a Low-Voltage Detect (LVD), Power-On Reset (POR), and a Watchdog Timer (WDT). Communication interfaces include one SPI, one I2C, and one SCI (UART) module. The device supports up to 32 interrupt/reset sources and provides software-selectable pullups on port pins when configured as inputs, plus an internal pullup on the RESET and IRQ pins to reduce external component count. The HCS08 core architecture uses a 16-bit instruction set inherited from the HC08 with uprated internal datapath widths, enabling single-cycle execution of most instructions and deterministic interrupt response. The integrated Flash supports in-application reprogramming via the standard NXP BDM (Background Debug Mode) interface and through software routines. Typical applications include automotive body electronics, industrial control, home appliances, sensor interfaces, motor control (using the PWM and ADC), and general-purpose embedded control where a low-cost, low-power 8-bit MCU is appropriate. The wide operating voltage range of 2.5 V to 3.3 V supports 3 V system designs. When designing with this device, ensure that firmware is written using HC08/S08 instructions and the CodeWarrior Development Studio toolchain. The exposed thermal pad on the QFN-EP package must be soldered to the PCB ground plane for proper thermal dissipation and electrical performance; floating the pad can cause erratic behavior.

Angebot Kontakt
MC9S08GT60ACBE - 8-Bit 40MHz S08 MCU, 60KB Flash | NXP
MC9S08GT60ACBE

MC9S08GT60ACBE - 8-Bit 40MHz S08 MCU, 60KB Flash | NXP

The NXP MC9S08GT60ACBE is an 8-bit microcontroller from the S08 family (S08GT series) featuring a 40 MHz HCS08 CPU core, 60 KB of flash program memory, and a 42-pin PDIP package. According to the verified NXP distributor listings, the device integrates SCI, SPI, and I2C communication interfaces for automotive and industrial embedded designs, with an operating temperature range of -40°C to +85°C. Background context: An 8-bit microcontroller (MCU) is a single-chip computer built around a CPU with an 8-bit data path. The S08 family represents NXP/Freescale's enhanced HC08-architecture line; the MC9S08GT60 sits inside the broader S08GT sub-family of low-cost, high-performance general-purpose 8-bit microcontrollers. Within the taxonomy, this places the part as: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor -> integrated circuit. The HCS08 core is binary-compatible with the legacy HC08 instruction set and adds the BGND instruction for background debug. Key features include 60 KB (60K x 8) of flash memory for code storage, 4 KB of RAM for data, and a maximum CPU clock frequency of 40 MHz. The device is supplied in a 42-pin SPDIP (Plastic DIP) through-hole package, simplifying prototyping and breadboarding. The supply voltage range spans 2.5 V to 3.3 V per the verified FindIC listing, suitable for battery-backed and low-power industrial nodes. On the architecture side, the HCS08 core executes most instructions in 1-2 bus cycles and provides up to 32 interrupt/reset sources with vectored interrupt handling. Software-configurable pull-ups on port pins used as inputs remove the need for external resistor networks. Communication peripherals include one SCI (UART), one SPI, and one I2C module, sufficient for sensor hubs, HMI keypads, and simple motor-control front ends. Typical applications span automotive body electronics, industrial control modules, consumer appliance controllers, and low-end sensor nodes where the 60 KB flash and 4 KB RAM comfortably host state-machine firmware. The wide -40°C to +85°C industrial temperature range also enables outdoor and factory-floor deployments. When designing with this MCU, allocate decoupling capacitance of 0.1 µF plus 4.7 µF bulk near the VDD/VSS pins, and reserve the BGND pin for in-circuit debugging. Designers should verify pinout against the specific S08GT series datasheet because the 42-pin SPDIP is shared with several siblings at different memory densities. This page synthesizes distributor pricing, verified parametric data, application guidance, and design notes that complement the manufacturer datasheet for engineers evaluating the MC9S08GT60ACBE.

Angebot Kontakt