Mikrocontroller

Produkte (20.000+)

MC9S08GT60ACFBE - 8-Bit 40MHz 60KB Flash S08 MCU | NXP
MC9S08GT60ACFBE

MC9S08GT60ACFBE - 8-Bit 40MHz 60KB Flash S08 MCU | NXP

The NXP MC9S08GT60ACFBE is a cost-effective 8-bit general-purpose microcontroller from the S08GT family, featuring an enhanced HCS08 CPU core running up to 40 MHz (20 MHz bus), with 60 KB of on-chip Flash, 4 KB of RAM, and 34 general-purpose I/O pins, all housed in a 44-pin QFP (10x10 mm) package. The device integrates an 8-channel 10-bit ADC, SCI/SPI/I2C communication peripherals, and software-selectable port pull-ups, making it suitable for automotive and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader taxonomy, the S08 family is a CISC 8-bit architecture positioned under the Freescale/NXP HCS08 lineage of low-cost, high-performance general-purpose microcontrollers, sitting alongside 16-bit S12 and 32-bit Kinetis families in NXP's automotive-grade portfolio. The GT sub-family emphasizes integration of Flash, RAM, ADC, and serial communication channels at low cost for body and chassis electronics. Key features include 60 KB (60K x 8) Flash program memory, 4 KB SRAM, a 40 MHz maximum CPU frequency, an 8-channel 10-bit ADC, multiple communication interfaces (one SCI, one SPI, one I2C), and a -40 C to +85 C industrial operating range. The 44-QFP package offers a manageable footprint with 34 user I/O lines, ample for keypad scanning, LED drive, sensor aggregation, and discrete control loops. Supply voltage spans 1.8 V to 3.6 V, with low-power wait and stop modes for battery-friendly designs. The HCS08 core uses a 16-bit stack-pointer-indexed instruction set with a BGND (background debug) instruction for non-intrusive in-circuit debugging. Up to 32 interrupt sources support real-time response, and the integrated COP watchdog, LVI (low-voltage detect), and clock monitoring provide robust fault recovery. The internal clock generator with FLL supports an external crystal or resonator across common communication baud-rate frequencies. Typical applications include HVAC control panels, appliance user interfaces, automotive body controllers, security and alarm keypads, and small industrial sensor hubs. The 40 MHz CPU and 60 KB Flash comfortably fit state-machine control plus small RTOS kernels for sensor fusion. The 8-channel ADC supports multi-zone temperature or pressure monitoring, and the SCI/SPI/I2C trio connects easily to motor pre-drivers, EEPROM, or external displays. When designing with this part, budget Flash for a small bootloader if field-upgrade is required, and reserve a hardware timer for software timing precision. Place a 100 nF decoupling cap close to each VDD pin and follow NXP's four-layer or two-layer reference layout recommendations in the datasheet for EMI compliance. The 44-QFP package allows hand-rework and optical inspection on prototype boards. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance that complements the manufacturer datasheet, helping engineers compare MC9S08GT60ACFBE to MC9S08GT32, MC9S08PT16, and MC9S08PA16 variants in the same S08 footprint.

Angebot Kontakt
MC9S08GT60ACFBER - 8-Bit 40MHz 60KB Flash S08 MCU | NXP (Tape & Reel)
MC9S08GT60ACFBER

MC9S08GT60ACFBER - 8-Bit 40MHz 60KB Flash S08 MCU | NXP (Tape & Reel)

The NXP MC9S08GT60ACFBER is a cost-effective 8-bit general-purpose microcontroller from the S08GT family, featuring an enhanced HCS08 CPU core running up to 40 MHz (20 MHz bus), with 60 KB of on-chip Flash, 4 KB of RAM, and 34 general-purpose I/O pins, all housed in a 44-pin QFP (10x10 mm) package. The device integrates an 8-channel 10-bit ADC, SCI/SPI/I2C communication peripherals, and software-selectable port pull-ups, making it suitable for automotive and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader taxonomy, the S08 family is a CISC 8-bit architecture positioned under the Freescale/NXP HCS08 lineage of low-cost, high-performance general-purpose microcontrollers, sitting alongside 16-bit S12 and 32-bit Kinetis families in NXP's automotive-grade portfolio. The GT sub-family emphasizes integration of Flash, RAM, ADC, and serial communication channels at low cost for body and chassis electronics. Key features include 60 KB (60K x 8) Flash program memory, 4 KB SRAM, a 40 MHz maximum CPU frequency, an 8-channel 10-bit ADC, multiple communication interfaces (one SCI, one SPI, one I2C), and a -40 C to +85 C industrial operating range. The 44-QFP package offers a manageable footprint with 34 user I/O lines, ample for keypad scanning, LED drive, sensor aggregation, and discrete control loops. Supply voltage spans 1.8 V to 3.6 V, with low-power wait and stop modes for battery-friendly designs. The HCS08 core uses a 16-bit stack-pointer-indexed instruction set with a BGND (background debug) instruction for non-intrusive in-circuit debugging. Up to 32 interrupt sources support real-time response, and the integrated COP watchdog, LVI (low-voltage detect), and clock monitoring provide robust fault recovery. The internal clock generator with FLL supports an external crystal or resonator across common communication baud-rate frequencies. Typical applications include HVAC control panels, appliance user interfaces, automotive body controllers, security and alarm keypads, and small industrial sensor hubs. The 40 MHz CPU and 60 KB Flash comfortably fit state-machine control plus small RTOS kernels for sensor fusion. The 8-channel ADC supports multi-zone temperature or pressure monitoring, and the SCI/SPI/I2C trio connects easily to motor pre-drivers, EEPROM, or external displays. When designing with this part, budget Flash for a small bootloader if field-upgrade is required, and reserve a hardware timer for software timing precision. Place a 100 nF decoupling cap close to each VDD pin and follow NXP's four-layer or two-layer reference layout recommendations in the datasheet for EMI compliance. The 44-QFP package allows hand-rework and optical inspection on prototype boards. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance that complements the manufacturer datasheet, helping engineers compare MC9S08GT60ACFBER to MC9S08GT32, MC9S08PT16, and MC9S08PA16 variants in the same S08 footprint.

Angebot Kontakt
MC9S08GT60ACFDE - 8-Bit 40MHz MCU, 60KB Flash | NXP
MC9S08GT60ACFDE

MC9S08GT60ACFDE - 8-Bit 40MHz MCU, 60KB Flash | NXP

The NXP Semiconductors MC9S08GT60ACFDE is an 8-bit S08 general-purpose microcontroller with a 40 MHz processor, 60 KB of Flash memory, 4 KB of RAM, and a 48-pin QFN package with an exposed pad. It operates from 2.5 V to 3.3 V and is identified by NXP as NRND. A microcontroller is a compact embedded-computing device that integrates a CPU, nonvolatile program memory, volatile data memory, peripherals, and input/output interfaces on one semiconductor die. The S08 core uses a CISC instruction set and belongs to the HCS08 family of general-purpose 8-bit controllers. The MC9S08GT family targets cost-sensitive control systems requiring more processing and memory capacity than the smallest 8-bit devices. The verified device data identifies 60 KB of Flash program memory, 4 KB of RAM, an 8-bit architecture, and operation up to 40 MHz. A secondary distributor listing describes the package as a 7 x 7 mm 48-QFN with exposed pad, while the suffix indicates tray packaging. Flash memory supports in-system programming and allows firmware updates without replacing the MCU, while RAM supports working variables, stack operations, and peripheral data handling. The S08 platform integrates communication, timing, analog, and control peripherals, but the verified excerpt does not enumerate their channel counts or block configurations. Detailed peripheral requirements, pin functions, clock options, electrical limits, and thermal ratings should therefore be checked against the manufacturer data sheet before schematic capture or firmware development. Typical uses for this controller class include industrial monitoring, building and appliance controls, motor-control assistance, general embedded products, and compact consumer devices where an 8-bit architecture, 60 KB of program storage, and a QFN footprint are appropriate. Its exposed-pad package also requires deliberate PCB thermal-pad layout and manufacturing planning. The most important design consideration is lifecycle risk. Because NXP lists MC9S08GT60ACFDE as NRND, engineers should avoid committing it to new designs unless NXP confirms availability and lifecycle support. Existing production equipment may continue to use the part subject to supply-channel verification. This page consolidates distributor listings, package information, lifecycle status, sourcing data, and application guidance. It also distinguishes verified drop-in alternatives from related S08 devices that are not automatically pin-compatible, helping engineers assess replacement risk without changing the embedded architecture unnecessarily.

Angebot Kontakt
MC9S08GT60CFD - 8-bit 40MHz S08 MCU 60KB Flash QFN48 | NXP
MC9S08GT60CFD

MC9S08GT60CFD - 8-bit 40MHz S08 MCU 60KB Flash QFN48 | NXP

The NXP (formerly Freescale) MC9S08GT60CFD is an 8-bit HCS08 family microcontroller featuring a 40 MHz CPU core, 60 KB of Flash program memory, and 4 KB of RAM, housed in a 48-pin QFN (7x7 mm) package with an exposed thermal pad. It integrates up to 39 general-purpose I/O pins, multiple timers, ADC channels, and serial communication peripherals optimized for cost-sensitive embedded designs in industrial and consumer markets. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals onto one silicon die. The HCS08 core is a CISC architecture that uses the HC08 instruction set with the added BGND instruction for background debugging. The MC9S08GT60CFD belongs to the S08GT family, which is a sub-family of the broader S08 microcontroller line within NXP's automotive and industrial MCU portfolio, characterized by low power consumption, integrated peripherals, and small form factors ideal for space-constrained designs. Key features include 60 KB (60K x 8) of Flash memory, 4 KB of RAM, 39 general-purpose I/O lines, a 40 MHz maximum CPU frequency, support for up to 32 interrupt/reset sources, and software-selectable pullups on port pins when used as inputs. The internal pullup on the RESET and IRQ pin reduces external component count, lowering total BOM cost. Operating voltage is 2.5V or 3.3V, and the device includes an internal clock generator option. The MC9S08GT60CFD uses a Harvard architecture with separate program/data bus structures and an enhanced HCS08 core that delivers approximately 1.6x the performance of the original HC08 at the same clock frequency. The integrated peripherals include timer/PWM modules, ADC, SCI/SPI/I2C serial interfaces, and a watchdog timer, providing flexible connectivity and control for motor control, sensor interfaces, and human-machine interface applications. Typical applications include industrial control systems, white goods and home appliances, HVAC controls, security alarm systems, low-end consumer electronics, and sensor interface modules. The 48-QFN package with exposed pad enables compact PCB layouts with good thermal performance for applications requiring sustained computational load. When designing with this device, verify supply voltage requirements carefully - the 2.5V variant and 3.3V variant require different DC-DC regulator configurations. Decoupling capacitors should be placed as close as possible to the VDD pins, and the exposed pad must be soldered to a properly sized copper pour for thermal dissipation and electrical grounding. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing a consolidated reference for component selection engineers evaluating the MPDMC45S08GT60CFD for new designs or service replacements.

Angebot Kontakt
MC9S08GT60CFDE - 8-Bit 40MHz S08 MCU 60KB Flash | NXP
MC9S08GT60CFDE

MC9S08GT60CFDE - 8-Bit 40MHz S08 MCU 60KB Flash | NXP

The NXP Semiconductors MC9S08GT60CFDE is an 8-bit S08 CISC microcontroller with 60KB Flash program memory, 4KB RAM, and a 40MHz CPU core, housed in a 48-pin QFN-EP (HVQCCN, 7x7 mm) package. It operates from 2.5V/3.3V supply rails and offers 39 general-purpose I/O pins along with on-chip peripherals including PWM, LVD, POR, WDT, plus I2C, SCI, and SPI connectivity. The device targets industrial-grade embedded applications requiring deterministic 8-bit performance and small footprint integration. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and I/O peripherals on a single die. The S08 family uses a CISC (Complex Instruction Set Computer) architecture with the HCS08 core, succeeding the legacy HC08 family. Within the broader hierarchy, the S08 sits under: microcontroller -> embedded processor -> semiconductor device. Compared with 32-bit Cortex-M devices, S08 microcontrollers trade raw throughput for cost, deterministic interrupt latency, and ultra-low static power consumption, making them preferred in cost-sensitive, latency-bound, or battery-aware designs. Key features of the MC9S08GT60CFDE include 60KB on-chip Flash with in-application reprogrammability, 4KB SRAM, an internal clock generator with trimming, multiple timer/PWM modules, an analog-friendly package with an exposed thermal pad, and built-in safety peripherals (LVD, POR, COP watchdog). The 48-pin QFN-EP package exposes enough GPIO (39 pins) for typical human-interface, motor-control, and sensor-hub designs. Industrial-grade operating temperature range (-40C to +85C minimum) makes the part suitable for factory and automotive cabin environments. Technically, the HCS08 core executes most instructions in 1-2 bus cycles and supports a BDM (Background Debug Mode) interface for in-circuit programming and debug. The on-chip Flash uses an embedded EEPROM-style array with security lock bits to protect intellectual property. The MC9S08GT60CFDE differs from the GT32 variant in memory density (60KB Flash vs 32KB Flash) and from GT16 in scaling — all share the S08 core and the 48-QFN-EP package, enabling family-up firmware reuse. Typical applications include industrial motor control (small BLDC, stepper drivers), appliance and white-goods human-interface modules, automotive body-electronics accessories, sensor-hub front-ends, and consumer remote controls. The combination of PWM, SCI/SPI, and I2C makes it well-suited as a bridge controller between a sensor network and a higher-level host. In low-power designs, the on-chip peripherals allow the CPU to remain in wait/stop modes while timers and interrupts handle event-driven wakeups. When designing with the MC9S08GT60CFDE, ensure the exposed thermal pad is soldered to a copper pour of at least 1 square inch to keep junction temperature in spec for continuous high-CPU-load scenarios. Designers should also evaluate the GT32CFDE variant (32KB Flash) for cost reduction if application code is small enough — both share the same 48-QFN-EP footprint, easing PCB reuse. This page synthesizes parametric data from the NXP/Freescale datasheet family, distributor pricing as of 2026-10-18, and a drop-in alternatives matrix drawn from the NXP S08 family — content not aggregated in any single distributor or manufacturer page.

Angebot Kontakt
MC9S08GT8ACBE - 8-Bit S08 MCU 8KB Flash 40MHz 42-PDIP | NXP
MC9S08GT8ACBE

MC9S08GT8ACBE - 8-Bit S08 MCU 8KB Flash 40MHz 42-PDIP | NXP

The NXP MC9S08GT8ACBE is an 8-bit HCS08 microcontroller featuring 8KB of Flash program memory, 1KB of RAM, and a 40MHz enhanced S08 core, housed in a 42-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the cost-effective, high-performance MC9S08GT general-purpose MCU family and operates from a 2.5V/3.3V supply with an integrated ADC, PWM, and multiple serial interfaces. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die, designed for embedded control tasks where cost and deterministic response dominate over raw throughput. The MC9S08GT8ACBE sits within the broader taxonomy: microcontroller -> embedded controller -> semiconductor IC. The HCS08 core retains backward compatibility with the legacy HC08 instruction set while adding the BGND instruction and improved interrupt handling, making it a natural upgrade path for legacy Freescale designs. Key features of the MC9S08GT8ACBE include an HCS08 core running up to 40MHz, 8KB of Flash, 1KB of on-chip RAM, 34 general-purpose I/O lines, and an integrated 8-channel 10-bit ADC. Communication peripherals include one SPI, one SCI (UART), and one I2C interface. System-level peripherals include Low-Voltage Detection (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM) modules, and a Watchdog Timer (WDT). Software-configurable pull-ups on input ports reduce BOM cost for keypad and switch-matrix interfaces. The S08 architecture uses a von Neumann memory map with up to 32 interrupt/reset sources, giving designers fine-grained control over timing-critical events. The BGND instruction enables background debug mode for in-circuit development using NXP's CodeWarrior or the open-source GCC toolchain with P&E or OSBDM debug probes. The integrated 10-bit ADC supports up to 8 channels, sufficient for sensor-reading applications such as battery monitoring or thermistor sampling. Typical applications include low-cost consumer appliances, white goods control boards, industrial sensor nodes, hobby/educational platforms, and legacy equipment retrofits. Its through-hole 42-PDIP package and 2.5V/3.3V dual-voltage operation make it especially attractive for breadboard prototyping and replacement of legacy HC08 designs. When designing with this device, ensure the supply voltage stays within the specified 2.7V-3.6V (3.3V nominal) range and provide adequate decoupling on VDD/VSS pairs. Unused I/O should be configured as outputs or inputs with the internal pull-up enabled to minimize quiescent current draw. This page synthesizes distributor pricing, drop-in alternatives from the S08GT family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt
MC9S08GT8ACFCE - 40MHz 8KB Flash 8-bit MCU | NXP
MC9S08GT8ACFCE

MC9S08GT8ACFCE - 40MHz 8KB Flash 8-bit MCU | NXP

The NXP Semiconductors MC9S08GT8ACFCE is a general-purpose 8-bit S08GT microcontroller operating at up to 40 MHz, with 8 KB of Flash memory, 34 I/O ports, and a 32-lead no-lead package identified by the source data as HVQCCN in a 5 mm by 5 mm square format. Its supply-voltage range is 1.8 V to 3.6 V. The enhanced S08 core uses the HCS08 instruction set with an added BGND instruction and supports up to 32 interrupt and reset sources. An 8-bit microcontroller is a compact embedded-control device that combines a processor core, programmable Flash memory, digital I/O, interrupts, timers, and communication peripherals on one semiconductor package. Within the hierarchy of embedded processors, this device belongs to the 8-bit microcontroller class and the NXP S08 general-purpose product family. It is appropriate for cost-sensitive control systems where 8 KB of code storage and a 40 MHz clock are sufficient. Key verified features include an 8-bit CPU architecture, 40 MHz maximum clock, 8 KB Flash memory, 34 I/O ports, operation from 1.8 V to 3.6 V, and support for as many as 32 interrupt and reset sources. The source data also identifies software-selectable pullups on ports when those ports are used as inputs, reducing the need for some external input-conditioning components. The no-lead, 32-terminal package supports compact surface-mount assemblies. The S08GT architecture combines an enhanced S08 core with general-purpose resources rather than a highly specialized application processor. Its HCS08-compatible instruction set supports compact embedded control code, while the 40 MHz operating speed provides processing headroom for digital state machines, timing, and interface handling. Exact RAM capacity, timer organization, analog peripherals, pin names, and electrical timing limits must be confirmed in the official manufacturer documentation before schematic or firmware release. Typical uses include industrial control modules, appliance controllers, building-control endpoints, small motor-control logic, keypad interfaces, and sensor-conditioning systems. A 5 mm by 5 mm package is useful where board area is constrained, although exposed-pad thermal and assembly requirements still depend on the exact ordering code and package drawing. Firmware development should use the memory map, interrupt vectors, and pin definitions published for this exact suffix. When designing a board, begin with the official 32-terminal package drawing and preserve the required decoupling and exposed-pad land pattern. Confirm pin multiplexing before assigning functions because general-purpose ports may support selectable pullups and multiple peripheral roles. Programmers should also verify the supported clock, reset, programming, and operating-temperature details rather than extrapolating them from another S08GT member. This page combines the verified manufacturer and distributor facts with sourcing, lifecycle, compatibility, and design guidance. It also distinguishes verified characteristics from details that remain unavailable in the supplied search evidence, helping engineers make a responsible preliminary selection before downloading the complete NXP datasheet.

Angebot Kontakt
MC9S08GT8AMFBE - 8KB Flash S08 8-bit MCU, 40MHz QFP-44 | NXP
MC9S08GT8AMFBE

MC9S08GT8AMFBE - 8KB Flash S08 8-bit MCU, 40MHz QFP-44 | NXP

The NXP MC9S08GT8AMFBE is an 8-bit HCS08-core microcontroller with 8KB Flash, 1KB RAM and a 40 MHz CPU, housed in a 44-pin PQFP (10x10 mm) package. It is part of the cost-effective, high-performance S08GT general-purpose MCU family, offering low-power technology, multiple power-management modes, and software-selectable port pullups for embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), and peripherals such as timers, ADC and communication interfaces. The MC9S08GT8AMFBE belongs to the 8-bit MCU hypernym hierarchy: microcontroller -> 8-bit microcontroller -> HCS08 family -> S08GT sub-family -> general-purpose low-power segment, and is commonly deployed where deterministic real-time behaviour, low quiescent draw and small code footprints are required. Key features include a 40 MHz enhanced S08 core with up to 32 interrupt/reset sources, 8KB on-chip Flash, 1KB RAM, 34 software-configurable I/O ports, an internal timer autowake-up from Stop 2/Stop 3 modes drawing typically only 300 nA additional current, and a 20 nA power-down mode. The supply voltage range is 1.8 V to 3.6 V, supporting single-cell Li-ion and 3.3 V regulated rails. The 44-pin QFP (10x10 mm) is a surface-mount plastic quad flat pack with gull-wing leads. The architecture uses a HC08-compatible instruction set with the added BGND instruction for background debug, making it compatible with NXP/Freescale CodeWarrior and P&E Multilink toolchains. Multiple power-management modes (Run, Wait, Stop 2, Stop 3) and fast wake-up times enable energy-efficient designs in battery-powered or energy-harvesting products. The S08GT family shares peripheral IP across members, simplifying code portability between MC9S08GT8A, MC9S08GT16A, MC9S08GT8 and MC9S08GT16 derivatives. Typical applications include automotive body electronics (LIN slaves, sensor conditioning, lighting controllers), white goods and appliance user panels, battery-backed instrumentation, and low-cost industrial control modules. The -40 to 125C operating range (Viyrian listing marks it automotive) suits underhood measurements and in-service industrial deployments. When designing with this part, ensure VDDA/VSSA decoupling is per datasheet, leave the BKGD/MS pin accessible for in-circuit debug, and verify Stop-mode wake-up source configuration before locking firmware. The S08GT family offers a low-risk migration path to larger Flash members (GT16) on the same QFP-44 footprint. This page synthesizes distributor pricing, same-package drop-in alternatives drawn from the S08GT family, and design notes not found in the manufacturer datasheet. Authoritative sources: NXP product page and the DigiKey listing for MC9S08GT8AMFBE.

Angebot Kontakt
MC9S08GT8AMFCE - HCS08 8-bit MCU, 8KB Flash, 40MHz, QFN-32 | NXP
MC9S08GT8AMFCE

MC9S08GT8AMFCE - HCS08 8-bit MCU, 8KB Flash, 40MHz, QFN-32 | NXP

The NXP MC9S08GT8AMFCE is a cost-effective, high-performance 8-bit microcontroller from the S08GT family, featuring an enhanced HCS08 core running up to 40 MHz, 8 KB of on-chip Flash, and a 32-pin QFN package with exposed thermal pad. It operates from a 1.8 V to 3.6 V supply and provides up to 34 general-purpose I/O pins with software-selectable pull-ups, making it suitable for general-purpose embedded control across industrial and consumer segments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, and peripherals such as timers, ADCs, and communication interfaces. The MC9S08GT8AMFCE belongs to the broader MCU hierarchy of microcontroller -> 8-bit MCU -> S08 family -> S08GT series -> power-efficient general-purpose class. The HCS08 core is an enhanced evolution of the legacy HC08 instruction set, adding the BGND instruction for background debugging while maintaining full source-level compatibility with HC08 code. This combination of instruction-set familiarity and modern features makes the S08GT family a popular choice for cost-sensitive upgrades of legacy HC08 designs. Key features include 8 KB Flash program memory, 1 KB RAM, an internal clock generator, multiple timer/PWM modules, an analog comparator, and a 10-channel 10-bit ADC. The device supports up to 32 interrupt/reset sources and offers a low-power wait and stop mode set for battery-friendly operation. The HCS08 core executes most instructions in one to two bus cycles, contributing to its energy-efficient throughput at 40 MHz. The device integrates the HCS08 CPU with a fast Flash controller, supporting in-application programming and security features to protect firmware IP. Its on-chip debug interface (background debug mode, BDM) allows non-intrusive in-circuit development without requiring a bond-out emulator, reducing tooling cost for engineers and shortening time-to-prototype. Typical applications include home appliances, motor control for small brushed DC and BLDC systems, security and alarm panels, industrial sensor interface boards, and consumer white goods such as washing machines and dishwashers. Its combination of low cost, robust I/O count, and integrated analog peripherals makes it well suited for mixed-signal front-end designs that need MCU control alongside signal conditioning. When designing with this device, allocate the QFN exposed pad to a continuous ground plane with multiple thermal vias to ensure proper heat dissipation and low-impedance ground reference. Verify that the chosen debugger supports the BDM protocol and plan the BGND/PTA4 pin routing early to avoid rework on a dense PCB. This page synthesizes distributor stock data, datasheet-verified specifications, and drop-in alternatives so engineers can make sourcing decisions without bouncing across DigiKey, Mouser, and the NXP product page. The NXP End-of-Life notice flagged on the official product page should be reviewed against your design's longevity requirements before committing to volume production.

Angebot Kontakt
MC9S08GT8AMFDE - 8-bit HCS08 MCU, 8KB Flash, 40MHz | NXP
MC9S08GT8AMFDE

MC9S08GT8AMFDE - 8-bit HCS08 MCU, 8KB Flash, 40MHz | NXP

The NXP MC9S08GT8AMFDE is an 8-bit S08GT family microcontroller built on the HCS08 CPU core, delivering up to 40 MHz clock speed with 8 KB of on-chip Flash program memory and a 48-pin QFN-EP (7x7 mm) package. It belongs to the cost-effective, high-performance S08 general-purpose microcontroller lineup and integrates an analog-to-digital converter alongside 34 software-configurable I/O ports. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control, integrating a CPU, non-volatile program memory, volatile data memory, peripheral interfaces (ADC, timers, communication), and I/O on one die. The HCS08 core is Freescale/NXP's enhanced 8-bit architecture that adds a BGND instruction and up to 32 interrupt/reset sources to the legacy HC08 instruction set, balancing deterministic real-time control with low power consumption. Within the broader semiconductor taxonomy, 8-bit MCUs sit beneath 16-bit and 32-bit MCUs and remain the right choice for cost-driven applications such as home appliances, motor control, and human-interface devices. Key features of the MC9S08GT8AMFDE include a 1.8 V to 3.6 V supply-voltage range suitable for battery-powered designs, software-selectable pullups on input ports, on-chip Flash with in-application programmability, an integrated ADC, and timers supporting PWM and input-capture modes. The wide operating temperature range makes it suitable for both consumer and industrial environments. The S08GT architecture supports up to 32 interrupt/reset sources for fast, deterministic event handling, and the integrated peripheral set includes ADC, timers, SCI/SPI, and a robust general-purpose I/O structure. With up to 40 MHz bus speed, the device is well matched to motor-control loops, sensor sampling, and user-interface polling workloads typical of white goods and small industrial equipment. Typical applications include major home appliances (washing machines, refrigerators, microwave ovens), small motor-control boards (fan, pump, BLDC drivers), industrial sensor conditioning and metering, low-cost consumer electronics, and battery-powered portable devices where the 1.8 V minimum supply enables single-cell Li-ion or two-AA operation. When designing with the MC9S08GT8AMFDE, choose decoupling and bulk capacitors sized to the ADC and digital switching noise; the exposed pad (EP) on the QFN-48 package must be soldered to a sufficient ground copper pour to keep junction temperature within spec at peak load. This page synthesizes NXP distributor pricing, same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to support sourcing, replacement, and BOM decisions.

Angebot Kontakt
MC9S08GW32CLH - S08GW 8-bit MCU, 32KB Flash, 64-LQFP | NXP
MC9S08GW32CLH

MC9S08GW32CLH - S08GW 8-bit MCU, 32KB Flash, 64-LQFP | NXP

The NXP MC9S08GW32CLH is an 8-bit microcontroller from the S08GW family built on the proven S08 core, delivering 32 KB of on-chip Flash and 20 MHz CPU performance in a 64-pin LQFP (10x10 mm) package. It targets single-phase electric, gas and water flow metering applications with two independent 16-bit SAR analog-to-digital converters (ADCs), a programmable delay block, and a pulse counter with automatic sensor decoding. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash), peripheral I/O, and interrupt logic onto one silicon die. Within the broader taxonomy, the MC9S08GW32CLH belongs to the hierarchy: 8-bit MCU -> microcontroller -> microprocessor -> integrated circuit -> semiconductor. The S08 core uses an enhanced Harvard architecture and runs the same instruction set as the legacy HC08, giving designers a stable, well-documented software platform with modern peripherals. Key features include 32 KB (32K x 8) Flash program memory, two on-chip 16-bit SAR ADCs with hardware sequencer, an LCD driver controller suitable for multi-digit metrology displays, and a rich connectivity set including I2C, LINbus, SCI (UART) and SPI. The device includes PWM channels for switching transducers, an LCD controller, and a watchdog timer (WDT) for safety-critical metering functions. The MC9S08GW combines a low-power S08 core with metrology-grade analog front ends - the two 16-bit SAR ADCs are differential and can pair with shunt resistors or current transformers for active and reactive energy measurement. The built-in pulse counter with automatic decoder enables direct interface to gas and water meter pulse outputs, while the LCD driver removes the need for an external display controller in cost-sensitive meter designs. Typical applications include single-phase electric meters, gas flow meters, water flow meters, and other low-power instrumentation panels with LCD readouts. The 64-LQFP footprint also gives enough I/O for industrial sensor hubs and home energy displays. When designing with this part, ensure the ADC reference and shunt resistor layout follow metrology PCB guidelines to keep measurement error below the 0.5% accuracy class. Provide a low-impedance ground plane under the analog supply pins to prevent switching noise from coupling into the ADC input. This page synthesizes distributor pricing (DigiKey, Mouser, Octopart), NXP life-cycle data, drop-in pin-compatible alternatives within the S08GW family, and practical design notes beyond what the NXP product brief offers.

Angebot Kontakt
MC9S08GW64CLH - S08 8-bit MCU, 64KB Flash, 20MHz | NXP
MC9S08GW64CLH

MC9S08GW64CLH - S08 8-bit MCU, 64KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08GW64CLH is an 8-bit microcontroller based on the proven S08 core, delivering 64KB of Flash memory, 20MHz bus operation, and dual independent 16-bit SAR ADCs in a 64-pin LQFP (10x10 mm) package. It is purpose-built for utility metering: the integrated pulse counter with automatic sensor decoding targets gas and water flow meters, while the dual-ADC architecture with programmable delay block supports single-phase electric metering. An 8-bit microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die. Within the power management and embedded control hierarchy, metering MCUs like the S08GW family sit between general-purpose 8-bit MCUs and dedicated metering ASSPs, offering meter-specific peripherals without sacrificing general I/O flexibility. Key features include the S08 core running at up to 20MHz, 64KB (64K x 8) Flash with in-application reprogramming, a flexible clock system with FLL (frequency-locked loop) supporting FEI, FEE, FBE, FBI, FBELP, and FBILP modes, and two independent 16-bit SAR ADCs. A programmable delay block ties ADC sampling to flow-pulse events, enabling accurate quasi-synchronous sampling of pressure and temperature for gas-density compensation. The device integrates typical metering peripherals: pulse counters with automatic quadrature/sensor decoding for reed, Hall, or optical flow sensors, plus serial communication (SCI/SPI/I2C-class peripherals on the S08 platform) for protocol handling in M-Bus, RF, and optical-head meter architectures. Low-power wait/stop modes support battery-powered water and gas meters with multi-year service life. Typical applications are gas flow meters, water flow meters, single-phase electric energy meters, and heat-cost allocators. The dual-ADC architecture allows simultaneous sensing of voltage and current channels in single-phase energy measurement. Design consideration: when the FLL reference source, reference divider, or trim value changes, or when moving between FLL-disabled and FLL-enabled modes, the clock specification applies per the manufacturer datasheet; allow settling time in software. If a crystal or resonator is used as the reference, ensure it is already running before mode transitions. This page synthesizes distributor pricing, drop-in alternatives, lifecycle (End-of-Life per NXP), and practical design notes not found in the manufacturer datasheet, verified as of 2026-10-10.

Angebot Kontakt
MC9S08GW64CLK - 8-bit S08 MCU, 64KB Flash, 20MHz, 80-LQFP | NXP
MC9S08GW64CLK

MC9S08GW64CLK - 8-bit S08 MCU, 64KB Flash, 20MHz, 80-LQFP | NXP

The NXP MC9S08GW64CLK is an 8-bit microcontroller from the S08GW family built on the proven HCS08 CISC core, integrating 64KB of on-chip Flash and operating at up to 20MHz bus frequency, housed in an 80-pin LQFP package (14x14 mm). The device is purpose-designed for single-phase electricity meters, gas flow meters and water flow meters, integrating two independent 16-bit SAR analog-to-digital converters and a programmable pulse counter with built-in sensor-decoding logic for automatic metering. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a mix of analog and digital peripherals. The 8-bit class targets cost-sensitive, deterministic, low-power applications where an arithmetic logic unit operating on byte-wide data is sufficient. The S08 family is NXP/Freescale's evolution of the legacy HC08 architecture, adding single-wire background debug (BDC), improved Flash endurance, and lower active/idle current. Key features of the MC9S08GW64CLK include 64KB Flash, 4KB SRAM, two 16-bit SAR ADCs with programmable delay trigger, a TSI (Touch Sensing Input) interface, RTC, multi-channel timer/PWM, and a wide 2.1V-3.6V supply range with on-chip voltage regulator. The integrated LCD driver (in the GW family) supports metered-segment displays without an external driver IC. Security is provided by a unique 80-bit device ID and Flash security/lock bits for anti-tamper metering. The S08 core uses a von Neumann architecture with 16-bit stack pointer and index registers, executing a CISC instruction set fully upward-compatible with the HC08. Two independent ADCs sample voltage and current channels simultaneously, enabling accurate real-power calculation in single-phase electricity meters without external sample-and-hold synchronization hardware. Typical applications include single-phase electricity meters, gas and water flow meters with pulse or encoder outputs, smart metering data concentrators, industrial sensor transmitters, and low-power battery-driven measurement nodes. The wide operating temperature range and integrated metrology peripherals reduce BOM cost versus discrete ADC + external MPU designs. When designing with the MC9S08GW64CLK, place the 32.768 kHz XTAL and load capacitors as close to the XTAL pins as possible, and route the analog inputs (ADP1/ADP2) with short guarded traces to minimize metrology error. The device is currently flagged End-of-Life by NXP, so long-life industrial metering programs should validate the last-time-buy window and plan a migration to the S08PL or S08MM family. This page synthesizes distributor inventory, parametric data, and cross-reference guidance not always available on the manufacturer product page, including drop-in alternatives verified to share the 80-LQFP footprint and key peripheral set.

Angebot Kontakt
MC9S08JE128CMB - 8-Bit 48MHz 128KB Flash MCU | NXP
MC9S08JE128CMB

MC9S08JE128CMB - 8-Bit 48MHz 128KB Flash MCU | NXP

The NXP Semiconductors MC9S08JE128CMB is an 8-bit S08 microcontroller with a 48 MHz processor, 128 KB of Flash program memory, 12 KB of RAM, and connectivity including I²C, SCI, SPI, and USB, housed in an 81-MAPBGA package measuring 10 mm by 10 mm. It is designed for compact embedded-control systems that require substantial flash storage and moderate processing performance. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and input/output interfaces on one package. The S08 MCU family belongs to the embedded-controller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. This integration reduces component count and simplifies connections in control, communications, consumer, and industrial products. The device offers 47 I/O lines and includes low-voltage detection, power-on reset, PWM, and a watchdog timer according to the supplied technical listing. Its 48 MHz maximum clock provides timing headroom for protocol handling and control loops, while the 128 KB Flash capacity supports embedded code and configuration data. The 12 KB SRAM provides working memory for firmware execution and data buffering. MC9S08JE128CMB belongs to the S08JE family and is associated with the JE128 product class. Its peripheral mix supports serial communication designs, USB-enabled control products, and compact user-interface systems. The 81-MAPBGA package is particularly relevant to high-density designs where a smaller land pattern than a leaded package is important. Typical applications include industrial control modules, USB-connected peripherals, compact consumer appliances, and embedded communication systems. Firmware should be reviewed for clock configuration, interrupt priorities, and peripheral initialization before deployment. The supplied distributor data indicates that some listings describe the part as obsolete, so lifecycle and inventory status should be confirmed before a new production design is approved. For PCB work, preserve the exact ball map and thermal-pad requirements from the manufacturer package drawing. If programming, USB, or communications behavior is critical, validate the relevant peripheral tolerances and pin multiplexing in the device datasheet rather than relying only on distributor summaries. This page combines the supplied distributor data with engineering guidance while clearly identifying missing specifications.

Angebot Kontakt
MC9S08JE128VLH - 8-bit S08 USB MCU, 128KB Flash, 48MHz | NXP
MC9S08JE128VLH

MC9S08JE128VLH - 8-bit S08 USB MCU, 128KB Flash, 48MHz | NXP

The NXP MC9S08JE128VLH is a 8-bit S08 S08 Microcontroller IC operating at 48MHz, integrating 128KB (128K x 8) FLASH program memory in a 64-LQFP (10x10) surface-mount package. According to NXP's product page and DigiKey listing, the MC9S08JE128/64 family provides ultra-low-power operation, USB connectivity and high measurement accuracy in a single 8-bit microcontroller, allowing designers to develop a more fully featured and cost-effective system. The device belongs to NXP's S08JE sub-family originally developed by Freescale Semiconductor, designed for embedded applications where USB integration, low power, and analog precision are required simultaneously. A microcontroller (MCU) is an integrated circuit that combines a processor, RAM, non-volatile program memory, and a peripheral set into a single chip. The 8-bit microcontroller category sits below 16-bit and 32-bit MCUs in computational throughput, but typically offers lower cost, lower power consumption, and simpler programming. Within NXP's portfolio, S08 microcontrollers occupy the low-power, cost-sensitive tier, above which sit the S12 (16-bit), Kinetis E (Cortex-M0+/M4), and Kinetis K (Cortex-M4) families. The MC9S08JE128VLH sits inside the LQFP-64 package family (LQFP family -> QFP family -> surface-mount plastic IC package), placing it in the mainstream SMD microcontroller footprint class. Key features of the MC9S08JE128VLH include integrated USB 2.0 connectivity, a high-resolution analog-to-digital converter (ADC), a digital-to-analog converter (DAC), multiple serial peripherals (SCI, SPI, I2C), a rich timer/PWM set, and an internal low-power oscillator. The combination of ADC, DAC, and USB on the same die eliminates external analog components and a separate USB transceiver, reducing both board space and BOM cost in measurement and consumer applications. From an application perspective, the MC9S08JE128VLH targets HVAC building control systems, PC peripherals, lighting control systems, industrial networking products, and portable medical devices, according to the Freescale/NXP product brief. These segments benefit from the on-chip ADC resolution, USB device/host/OTG support, and the low-power modes that the S08JE core offers for battery-powered instruments. NXP's product page classifies this part as End-of-Life (EOL) with a published Discontinuance and Replacement Product Change Notice, so designers planning new designs should evaluate replacement parts listed in the alternatives array and the NXP PCN. Designers should be aware of the part's EOL status when planning new designs. The recommended approach is to verify the active PCN and replacement MPN list on NXP's website before committing to a new design. Existing designs in production should secure safety stock and qualify a same-package drop-in from the alternatives array below to mitigate future supply risk.

Angebot Kontakt
MC9S08JE128VLK - 8-Bit 48MHz 128KB MCU | NXP
MC9S08JE128VLK

MC9S08JE128VLK - 8-Bit 48MHz 128KB MCU | NXP

The NXP Semiconductors MC9S08JE128VLK is an 8-bit S08JE-series microcontroller with a 48 MHz maximum clock frequency and 128 KB of flash memory, housed in an 80-lead LQFP package measuring 12 mm by 12 mm. It is designed for embedded control applications requiring flash-resident firmware, an 8-bit data bus, and a high-pin-count package for external peripherals and signal connectivity. Verified distributor information identifies the device as an industrial-grade microcontroller from the Freescale Semiconductor/NXP S08 family. What is an 8-bit microcontroller? An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, and peripheral interfaces. Its CPU and data path process 8-bit values, making it suitable for control logic, monitoring, communication management, and human-interface functions. The MC9S08JE128 belongs to the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its 128 KB flash capacity provides substantially more code storage than many basic 8-bit control devices while retaining a straightforward embedded programming model. Verified product data identifies the HCS08 core, 8-bit bus width, 48 MHz maximum clock, and 128 KB flash memory. The 80-LQFP package exposes a large number of pins compared with small-outline packages, which can simplify access to multiple I/O resources in systems that need extensive peripheral connectivity. The package is surface mount and uses gull-wing leads according to distributor package descriptions. Exact pin names, peripheral assignments, voltage limits, RAM capacity, and electrical timing values were not included in the supplied verified data and therefore are not inferred here. The MC9S08JE128VLK is associated with embedded applications including HVAC building-control systems, PC peripherals, lighting-control systems, industrial networking products, and portable medical devices, as identified by the verified search data. Its combination of flash memory, an S08 processor core, and a high-pin-count package makes it useful when firmware must be stored locally and the board requires numerous external connections. Designers should verify the exact peripheral multiplexing, memory map, and electrical limits against the manufacturer datasheet before layout or production use. Because the provided material does not confirm an active lifecycle designation, the lifecycle status is recorded as unknown. Distributor listings may indicate supply availability at the time of retrieval, but that does not establish long-term product commitment. The listed unit price is a reference value as of 2026-10-21 and should not be treated as a guaranteed quotation. This page combines verified distributor information, manufacturer-linked documentation references, and engineering-oriented selection guidance without adding unverified electrical values.

Angebot Kontakt
MC9S08JE128VMB - 8-Bit 48MHz 128KB MCU | NXP Semiconductors
MC9S08JE128VMB

MC9S08JE128VMB - 8-Bit 48MHz 128KB MCU | NXP Semiconductors

The NXP Semiconductors MC9S08JE128VMB is an 8-bit S08 embedded microcontroller with a 48 MHz core, 128 KB of Flash program memory, 12 KB of RAM, and 47 I/O pins in an 81-map BGA package measuring 10 mm by 10 mm. It integrates I²C, SCI, SPI, USB, PWM, watchdog, low-voltage detection, and power-on reset peripherals for compact control designs. The verified listing identifies the device as obsolete, so procurement should prioritize inventory review rather than new long-term design commitments. A microcontroller is a semiconductor that integrates a CPU, memory, and peripherals into one device for embedded control. The S08 MCU family belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and integrated circuit. Such devices sit between simple logic controllers and higher-performance microprocessors, providing enough deterministic I/O and serial connectivity for motor, appliance, communications, and industrial-control tasks without requiring an external processor. The MC9S08JE128VMB combines a 48 MHz operating frequency with 128 KB of programmable Flash and 12 KB of SRAM. Its 47 available I/O pins provide substantial board-level connectivity in a dense package. Integrated I²C supports short-distance bus-oriented peripherals, SCI supports asynchronous serial communication, and SPI supports synchronous peripheral communication. USB, PWM, low-voltage detection, power-on reset, and watchdog functions reduce the need for separate support devices in suitable embedded systems. The 81-map BGA package requires careful PCB design because its fine-pitch balls are not visually accessible after assembly. Its 10 mm by 10 mm land pattern demands accurate escape routing and manufacturing controls. Although the package is compact, real implementation depends on the complete ball map, exposed thermal or power balls, and recommended PCB stack-up specified by the manufacturer datasheet. The provided search data does not include individual ball names or the complete pinout, so those details are not inferred here. Typical uses include USB-connected control peripherals, small industrial controllers, sensor hubs, keypad interfaces, actuator controllers, and compact consumer products. At 48 MHz, the S08 core can service interrupt-driven serial links and real-time I/O, but firmware architecture must account for interrupt latency and peripheral timing. The 128 KB Flash capacity is suitable for substantially more code than a very small state-machine controller, while 12 KB of RAM supports communication buffers and intermediate state. For new designs, engineers should first confirm lifecycle availability, then verify the exact suffix, package drawing, ball map, clock configuration, memory map, and USB electrical requirements. Existing products may still be supportable through last-time-buy or inventory channels, but no unverified transition status, operating-temperature grade, voltage range, or package thermal data is assumed. This page distinguishes verified distributor facts from parameters that require direct datasheet confirmation. This page consolidates verified distributor listings, the obsolete-status signal, memory and connectivity details, sourcing guidance, and engineering cautions. It is intended to accelerate identification and lifecycle review while avoiding unsupported substitutions for an obsolete 81-map BGA microcontroller.

Angebot Kontakt
MC9S08JE64CLH - 64KB Flash USB MCU | NXP S08JE 64-LQFP
MC9S08JE64CLH

MC9S08JE64CLH - 64KB Flash USB MCU | NXP S08JE 64-LQFP

The NXP MC9S08JE64CLH is an 8-bit S08JE-series microcontroller featuring 64KB of Flash, 12KB of RAM, and an integrated USB 2.0 full-speed device controller, housed in a 64-pin LQFP package (10x10 mm). It runs the S08 CISC instruction set at up to 48 MHz from a 2.5V/3.3V supply and delivers ultra-low-power operation with high measurement accuracy for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic control and low power rather than raw throughput. Within the broader hierarchy of semiconductor devices, MCUs sit above discrete logic and below microprocessors (MPUs), combining CPU core, memory, and peripherals. The S08JE family further specializes this role by integrating USB 2.0 connectivity, a high-resolution ADC and DAC, and flexible peripherals, making it ideal for human-interface devices, instrumentation, and portable measurement equipment. Key features of the MC9S08JE64CLH include 64KB of on-chip Flash program memory, 12KB of RAM, an internal oscillator, and up to 33 general-purpose I/O pins. Its peripheral mix covers I2C, SCI (UART), SPI, and USB, complemented by LVD, POR, PWM, and a watchdog timer. The 64-LQFP-10x10 package exposes the full peripheral set while keeping board area modest for low-cost single-layer designs. The S08 CISC core uses the HCS08 instruction set, supporting 48 MHz operation above 3 V, 40 MHz above 2.1 V, and 20 MHz above 1.8 V across the -40 °C to +105 °C industrial temperature range. The integrated USB 2.0 full-speed (12 Mbps) interface with on-chip transceiver eliminates the need for an external PHY, while the 12-bit ADC and 12-bit DAC deliver measurement-grade analog performance for sensor-conditioning applications. Typical applications include USB HID peripherals, PC-based test and measurement instruments, glucose and environmental meters, and low-power data loggers. The wide voltage range also enables direct operation from a single-cell Li-ion supply in battery-powered devices. Designers should note that the MC9S08JE64CLH is approaching end-of-life per the NXP product page, and engineers should plan for the recommended replacement or validate long-term supply before committing to new designs. The internal oscillator reduces BOM cost but offers less accuracy than an external crystal, so USB applications requiring tight timing should consider an external reference. This page synthesizes distributor availability, drop-in alternatives within the S08JE family, and practical design notes not found in the NXP datasheet alone.

Angebot Kontakt
MC9S08JE64VLH - 8-Bit 48MHz 64KB Flash MCU | NXP
MC9S08JE64VLH

MC9S08JE64VLH - 8-Bit 48MHz 64KB Flash MCU | NXP

The NXP Semiconductors MC9S08JE64VLH is an 8-bit S08JE-series microcontroller with a 48 MHz maximum clock, 64 KB of Flash program memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It combines the HCS08 instruction set with USB connectivity, high measurement accuracy, and ultra-low-power operation for cost-sensitive embedded control designs. A microcontroller is a compact integrated circuit containing a processor core, program memory, data memory, peripherals, and input/output interfaces. It belongs to the embedded-controller hierarchy and executes firmware that senses inputs, performs control calculations, and drives external hardware. The S08 core provides an 8-bit architecture suited to appliances, metering equipment, industrial controls, and USB-connected products where higher processing capacity is not essential. Verified listings identify 64 KB of Flash, 12 KB of RAM, 33 I/O pins, a 48 MHz speed rating, an internal oscillator, and tray packaging. The reported supply options include 2.5 V and 3.3 V operation. Published family information also associates the JE64/128 family with USB connectivity, ultra-low-power operation, and high measurement accuracy, making the device suitable for control systems that need both communication and analog precision. The 48 MHz maximum speed can improve control-loop responsiveness compared with slower 8-bit devices, while the 64 KB Flash capacity provides room for application firmware and fixed-function routines. The 64-LQFP package exposes substantially more I/O than a small package, allowing external sensors, displays, communications circuitry, and actuators to be connected while retaining a conventional leaded footprint for inspection and assembly. Typical uses include USB-connected control accessories, low-power sensing nodes, measurement instruments, appliance controls, and compact industrial products. Before schematic capture, verify USB transceiver requirements, pin multiplexing, clock configuration, memory organization, electrical limits, and firmware dependencies in the manufacturer datasheet. Board layout should preserve clean routing for USB and sensitive measurement signals and provide appropriate decoupling near the device. This page combines verified manufacturer and distributor data with purchasing guidance, design considerations, and application context. It does not infer unreported electrical limits, pin functions, lifecycle status, or prices; those items remain marked as unavailable rather than guessed.

Angebot Kontakt
MC9S08JM32CGT - 8-bit USB MCU, 32KB Flash, 48MHz, QFN-48 | NXP
MC9S08JM32CGT

MC9S08JM32CGT - 8-bit USB MCU, 32KB Flash, 48MHz, QFN-48 | NXP

The NXP MC9S08JM32CGT is an 8-bit HCS08-family microcontroller with on-chip USB 2.0 full-speed device support, 32KB of Flash program memory, and a 48 MHz CPU core, packaged in a 48-pin QFN-EP (7x7 mm, exposed thermal pad). It is designed for industrial and consumer applications that require standardized USB serial communication with low BOM cost. Background: An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, an ALU, on-chip program memory (Flash/ROM), data memory (RAM), and a fixed set of peripherals. The HCS08 core is the second-generation HC08 architecture, offering improved instruction efficiency, a background debug module, and up to 48 MHz operation. Within the broader taxonomy, MCUs sit at the lowest level of the computing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The S08JM family specifically adds an integrated USB 2.0 full-speed device controller, eliminating the need for an external PHY and reducing both board area and BOM cost. Key features include a 48 MHz CPU (24 MHz internal bus), 32 KB Flash, 2 KB RAM, a USB 2.0 full-speed device with on-chip transceiver, SCI (UART), SPI, and IIC interfaces, an 8-channel 12-bit ADC, multiple timers, and an integrated voltage regulator supporting 3.3 V or 5 V operation. The 48-QFN-EP package exposes a thermal pad that must be soldered to the ground plane for thermal dissipation and electrical reference. Technically, the HCS08 core adds the BGND instruction for non-intrusive background debugging, plus an on-chip ICE debug module with comparators and triggers. The integrated 3.3 V LDO allows single-rail 5 V operation; an external 3.3 V supply can also be used. The USB device includes an internal 1.5 kOhm pull-up that the firmware can enable or disable. Typical applications include USB-to-UART bridges, HID-class peripherals (mice, keyboards, custom joysticks), industrial USB sensor nodes, point-of-sale terminals, and consumer USB devices. The wide operating voltage and integrated peripherals make it a strong fit when designers want to add USB without external PHY or complex firmware stacks. When designing with this part, ensure the exposed pad (EP) is soldered to a continuous ground plane for thermal and electrical performance. Use NXP's USB stack templates and verify enumeration with a USB analyzer, since USB compliance failures are common when the D+/D- traces are not 90-ohm differential. This page synthesizes distributor pricing, drop-in alternatives in the same QFN-48 footprint, and practical design notes for the S08JM USB MCU that go beyond the manufacturer datasheet.

Angebot Kontakt
MC9S08JM32CLD - 8-Bit 48MHz USB MCU | NXP | LQFP-44
MC9S08JM32CLD

MC9S08JM32CLD - 8-Bit 48MHz USB MCU | NXP | LQFP-44

The NXP Semiconductors MC9S08JM32CLD is an 8-bit S08JM microcontroller with a 48 MHz CPU, 32 KB of Flash memory, 2 KB of RAM, and an on-chip USB 2.0 full-speed device controller in a 44-LQFP package. It integrates PWM, ADC, SCI, and SPI interfaces for embedded USB-control, industrial, and consumer designs. The verified product information identifies a 24 MHz internal bus frequency and a 3.3 V/5 V operating supply context. What is an 8-bit MCU? An 8-bit microcontroller is a compact embedded-processing device whose central processing unit, registers, and instruction set operate primarily on 8-bit data. The MC9S08JM32CLD belongs to the S08 family of Freescale-derived 8-bit MCUs, now supported by NXP Semiconductors. Its USB device support adds a standardized serial interface for firmware updates, data acquisition, human-interface devices, and connected peripheral control. The main engineering features include a 48 MHz HCS08 CPU, 32 KB Flash organized as 32K x 8, 2 KB RAM, USB 2.0 full-speed device support, and integrated serial peripherals. PWM supports motor, dimming, and waveform-generation tasks; the ADC supports analog measurement; SCI and SPI provide communication paths to sensors, converters, displays, and external memories. The verified distributor records identify the part in a 44-LQFP, 10 x 10 mm package. Architecturally, the S08JM family combines a compact 8-bit core with USB connectivity and embedded peripherals, making it suitable for cost-sensitive systems that need more than a basic GPIO controller. The 24 MHz internal bus figure is distinct from the advertised 48 MHz CPU frequency and should not be treated as an interchangeable clock specification. Firmware developers should use the NXP S08 development tools and the exact peripheral configuration documented for the selected device variant. Typical applications include USB-connected data loggers, USB control panels, industrial interface modules, instrument peripherals, low-cost consumer accessories, and USB-enabled sensor nodes. In each case, the MCU consolidates USB communication, control logic, timing, and analog or serial functions into one package, reducing board complexity compared with a separate MCU and USB bridge. For a new layout, preserve the exact LQFP-44 land pattern, power and decoupling requirements, USB data-routing constraints, programming access, and oscillator configuration from the manufacturer documentation. Verify lifecycle status, supply tolerances, pin multiplexing, and programming-tool support before committing to production because those details were not included in the supplied search extracts. This page consolidates verified distributor and manufacturer information, including the USB feature set, memory configuration, clock information, package identification, lifecycle indication, and source links. It also distinguishes confirmed specifications from parameters that require the complete NXP datasheet or a design review before production release.

Angebot Kontakt
MC9S08JM32CLH - 8-Bit S08 USB MCU 32KB Flash LQFP-64 | NXP
MC9S08JM32CLH

MC9S08JM32CLH - 8-Bit S08 USB MCU 32KB Flash LQFP-64 | NXP

The NXP MC9S08JM32CLH is an 8-bit S08JM microcontroller featuring 32 KB of on-chip Flash, an integrated USB 2.0 full-speed device controller, and a 48 MHz HCS08 CPU core, housed in a 64-pin LQFP (10x10 mm) package. According to the NXP product page, this part belongs to the S08JM family that extends NXP's entry-level USB portfolio with on-chip USB 2.0 full-speed device support, providing a fast, economical and standardized way to add USB connectivity to industrial and consumer embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), peripherals, and I/O into one device. The S08 core is NXP's 8-bit HCS08 CPU family, descended from the HC08 instruction set with added BGND instruction support and hardware breakpoint capability for in-circuit debugging. Within the broader taxonomy, the S08JM belongs to 8-bit microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. Compared to 32-bit ARM Cortex-M parts, the S08JM prioritizes low cost, simple toolchain, and integrated USB at the expense of raw compute throughput. Key features include 32 KB Flash program memory, up to 48 MHz CPU clock, full-speed USB 2.0 device on-chip PHY, SCI (UART), SPI, and I2C peripherals, multiple timers (TPM), an analog-to-digital converter, and a low-power stop/wait modes set. The integrated USB controller eliminates the need for an external PHY, which reduces total bill-of-materials cost and PCB area in connected products. Background debug system (BDCS) support allows in-circuit programming and debugging via a single-wire BDC connection. Typical applications include USB HID peripherals (keyboards, mice, game controllers), USB-to-serial bridges, USB metering and data-acquisition devices, industrial control panels with USB diagnostics ports, and low-cost consumer appliances requiring PC connectivity. Design considerations include selecting appropriate pull-up resistors on the USB D+/D- lines, providing adequate decoupling near the LQFP-64 power pins, and planning the voltage regulator (typically 3.3 V) shared with the USB transceiver. The 64-pin LQFP exposes enough I/O for mixed analog and digital designs while remaining hand-solderable for prototypes. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
MC9S08JM32CQH - 48MHz 32KB Flash USB MCU | NXP | 64-QFP
MC9S08JM32CQH

MC9S08JM32CQH - 48MHz 32KB Flash USB MCU | NXP | 64-QFP

The NXP Semiconductors MC9S08JM32CQH is an 8-bit S08JM microcontroller with a 48 MHz HCS08 CPU, 32 KB of Flash memory, and USB 2.0 full-speed device connectivity in a 64-QFP 14 x 14 mm package. The verified product listing also identifies CAN connectivity, making this device suited to compact embedded controllers that exchange serial data while coordinating peripheral or automotive functions. Its combination of 32K x 8 Flash, 48 MHz processing, USB, and CAN positions it between simple 8-bit I/O devices and more complex communications controllers. An 8-bit microcontroller is a programmable integrated circuit that executes firmware from embedded nonvolatile memory and reads sensors or operates actuators through digital and analog peripherals. MC9S08JM32CQH belongs to the S08 family of HCS08-based microcontrollers. USB enables connection to a host computer or other USB controller, while CAN supports robust communication between embedded nodes. Together, these interfaces can standardize data exchange in industrial, consumer, and automotive-oriented control systems without requiring a separate protocol transceiver on the digital side of the design. The verified data identifies an S08 core, 48 MHz CPU frequency, 32 KB Flash organized as 32K x 8, and a 64-QFP package measuring 14 x 14 mm. It also identifies on-chip USB 2.0 full-speed device support and CAN connectivity. Other details such as SRAM capacity, analog peripherals, operating voltage, temperature limits, timers, and electrical timing were not supplied in the verified extract and therefore must be confirmed in the NXP datasheet before design release. At 48 MHz, the CPU provides substantially more instruction throughput than many basic 8-bit controllers while retaining the relatively simple programming and peripheral model associated with the S08 architecture. USB and CAN integration can reduce external component count in a connected embedded product. The trade-off is that firmware must account for USB enumeration, CAN timing, and protocol state while remaining within the device's documented memory and peripheral limits. Typical uses include USB-connected industrial controls, automotive accessory controllers, CAN-connected nodes, USB-to-CAN interface equipment, human-interface panels, and compact embedded data-acquisition modules. The device is most appropriate when an existing S08-based design needs both USB device connectivity and CAN support rather than a high-end processor or a separate communications bridge. Before schematic capture, verify the 64-pin assignment, power rails, decoupling requirements, oscillator options, reset configuration, USB transceiver support, CAN physical-layer requirements, programming interface, and package tolerances directly against the NXP datasheet. PCB layout should reserve USB differential routing and controlled impedance support, while CAN requires an external physical-layer transceiver unless the selected board architecture provides one elsewhere. This product synthesis separates verified identity and headline specifications from unverified electrical details. It combines distributor availability references, lifecycle information, interface suitability, and practical design cautions so procurement and engineering teams can evaluate the MC9S08JM32CQH without treating missing datasheet parameters as established facts.

Angebot Kontakt
MC9S08JM60CGT - 8-bit 48MHz S08JM MCU, 60KB Flash, USB | NXP
MC9S08JM60CGT

MC9S08JM60CGT - 8-bit 48MHz S08JM MCU, 60KB Flash, USB | NXP

The NXP MC9S08JM60CGT is an 8-bit S08JM family microcontroller built on the HCS08 CPU core, delivering up to 48 MHz CPU clock with a 24 MHz internal bus frequency, integrating 60 KB of on-chip Flash, and offering a USB 2.0 full-speed device controller. The device is housed in a 48-pin QFN-EP (exposed pad) package measuring 7 mm x 7 mm with 0.5 mm pitch, providing a compact footprint for space-constrained designs while the exposed pad enables robust thermal dissipation. Operating from a 2.7 V to 5.5 V supply, the part targets industrial and consumer applications that need standardized USB connectivity. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The S08 core is an 8-bit CPU that executes the HC08 instruction set extended with the BGND instruction for background debugging. The S08JM family extends NXP's entry-level USB portfolio by combining the HCS08 CPU with an on-chip USB 2.0 full-speed device controller, making it a fast and economical way to add standardized serial communications to peripheral devices. In the broader taxonomy, the MC9S08JM60CGT sits within 8-bit microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. Key features include an integrated USB 2.0 full-speed device controller with on-chip transceiver, 60 KB Flash program memory, up to 60 MHz bus capability from an internal 48 MHz clock source, multiple timers (TPM), ADC, SCI/SPI/I2C communication peripherals, and a background debugging system with on-chip in-circuit emulator (ICE) module. The ICE module contains two comparators and nine trigger modes, plus an eight-deep FIFO for change-of-flow trace, supporting single breakpoint setting during in-circuit debugging and two additional breakpoints from the debug module. A low-voltage detect (LVD) and watchdog timer provide system-level safety. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer and index register, providing improved code density over the legacy HC08. The 48-pin QFN-EP package supports up to 38 general-purpose I/O pins and integrates an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance. The internal clock source eliminates the need for an external crystal in many USB applications, though an external 48 MHz crystal may be used for clock-critical USB compliance. Typical applications include USB HID peripherals such as keyboards, mice, and game controllers, USB-to-UART bridge cables, industrial USB sensor interfaces, point-of-sale (POS) terminals, consumer USB dongles, and embedded learning/development platforms. The integrated USB transceiver eliminates the need for an external USB PHY, reducing BOM cost and board area. The 60 KB Flash accommodates full USB stack implementations including HID, CDC, and vendor-class drivers. When designing with the MC9S08JM60CGT, observe USB PCB layout guidelines: maintain a 90-ohm differential impedance on the D+/D- pair, place 27-ohm series termination resistors close to the MCU pins, and tie the exposed pad to a solid ground pour. The internal regulator generates the 3.3 V USB-domain supply from the 5 V VBUS rail; ensure the VBUS detection logic is correctly implemented in firmware before connecting pull-up resistors. This page synthesizes distributor availability, drop-in alternatives within the QFN-48 footprint, and practical design notes drawn from the MC9S08JM60 datasheet that go beyond raw spec repetition.

Angebot Kontakt