6EDL04N02PRXUMA1 vs 6EDL04N03PRXUMA1 Vergleich
Detaillierter Direktvergleich von 6EDL04N02PRXUMA1 von Infineon und 6EDL04N03PRXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | 6EDL04N02PRXUMA1 | 6EDL04N03PRXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,32 | $1,85 |
| Product Type | 3-Phase Gate Driver IC | — |
| Driver Configuration | Half-bridge (3 high-side + 3 low-side) | — |
| Maximum Blocking Voltage | +180 V (VS referenced to GND for high side) | — |
| Rated Supply Voltage (VCC) | 200 V class (operating range 10 V to 20 V on VCC) | — |
| Source Current (typ.) | 0.375 A | — |
| Sink Current (typ.) | 0.75 A | — |
| Bootstrap Diode | Integrated (BSD) on all 3 high-side drivers | Integrated (3 channels) |
| Over-Current Protection | Yes (single-shunt, ITRIP/CIN pin) | Yes (adjustable threshold via ITRIP) |
| Enable Pin (EN) | Yes (active-high) | — |
| Fault Output (nFAULT) | Yes (active-low, open-drain) | — |
| Input Logic Compatibility | CMOS / LSTTL, 3.3 V and 5 V | — |
| Interlocking / Anti-shoot-through | Yes (built-in per phase pair) | — |
| Process Technology | Thin-film SOI (Silicon-On-Insulator) | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | — |
| Maximum Junction Temperature | +150 °C | — |
| Gehäuse | PG-TSSOP-28 (28-pin, 4.40 mm width, exposed pad) | PG-TSSOP-25 |
| Montageart | Surface Mount | Surface Mount |
| Target Switches | MOSFETs up to 180 V, IGBTs up to 180 V | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020, [DATA_NEEDED: confirm level]) | 3 |
| RoHS-Status | Compliant | Compliant |
| Driver Type | — | Three-phase gate driver (6-channel half-bridge) |
| Number of Drivers | — | 6 |
| Ausgangskonfiguration | — | Non-inverting half-bridge |
| Supply Voltage (VDD) | — | 10 V to 25 V |
| Logic Supply Voltage (VSS) | — | 3.3 V / 5 V |
| Output Current (Source) | — | 0.24 A |
| Output Current (Sink) | — | 0.375 A |
| Anstiegszeit | — | 60 ns (typical at 1 nF load) |
| Abfallzeit | — | 26 ns (typical at 1 nF load) |
| Fault Output | — | Yes (open-drain) |
| Enable-Pin | — | Yes (EN, active-high) |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Betriebstemperatur | — | -40 C to +125 C |
| Blocking Voltage | — | 200 V / 600 V family |