6EDL04N02PRXUMA1 vs 6EDL04N03PRXUMA1 Comparação
Comparação detalhada lado a lado de 6EDL04N02PRXUMA1 por Infineon e 6EDL04N03PRXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | 6EDL04N02PRXUMA1 | 6EDL04N03PRXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $2,32 | $1,85 |
| Product Type | 3-Phase Gate Driver IC | — |
| Driver Configuration | Half-bridge (3 high-side + 3 low-side) | — |
| Maximum Blocking Voltage | +180 V (VS referenced to GND for high side) | — |
| Rated Supply Voltage (VCC) | 200 V class (operating range 10 V to 20 V on VCC) | — |
| Source Current (typ.) | 0.375 A | — |
| Sink Current (typ.) | 0.75 A | — |
| Bootstrap Diode | Integrated (BSD) on all 3 high-side drivers | Integrated (3 channels) |
| Over-Current Protection | Yes (single-shunt, ITRIP/CIN pin) | Yes (adjustable threshold via ITRIP) |
| Enable Pin (EN) | Yes (active-high) | — |
| Fault Output (nFAULT) | Yes (active-low, open-drain) | — |
| Input Logic Compatibility | CMOS / LSTTL, 3.3 V and 5 V | — |
| Interlocking / Anti-shoot-through | Yes (built-in per phase pair) | — |
| Process Technology | Thin-film SOI (Silicon-On-Insulator) | — |
| Faixa de temperatura de operação | -40 °C to +125 °C | — |
| Maximum Junction Temperature | +150 °C | — |
| Encapsulamento | PG-TSSOP-28 (28-pin, 4.40 mm width, exposed pad) | PG-TSSOP-25 |
| Tipo de montagem | Surface Mount | Surface Mount |
| Target Switches | MOSFETs up to 180 V, IGBTs up to 180 V | — |
| Nível MSL | MSL3 (per JEDEC J-STD-020, [DATA_NEEDED: confirm level]) | 3 |
| Status RoHS | Compliant | Compliant |
| Driver Type | — | Three-phase gate driver (6-channel half-bridge) |
| Number of Drivers | — | 6 |
| Configuração de saída | — | Non-inverting half-bridge |
| Supply Voltage (VDD) | — | 10 V to 25 V |
| Logic Supply Voltage (VSS) | — | 3.3 V / 5 V |
| Output Current (Source) | — | 0.24 A |
| Output Current (Sink) | — | 0.375 A |
| Tempo de subida | — | 60 ns (typical at 1 nF load) |
| Tempo de descida | — | 26 ns (typical at 1 nF load) |
| Fault Output | — | Yes (open-drain) |
| Pino de habilitação | — | Yes (EN, active-high) |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Temperatura de operação | — | -40 C to +125 C |
| Blocking Voltage | — | 200 V / 600 V family |