AD823ARZ vs NE5532ADR Vergleich
Detaillierter Direktvergleich von AD823ARZ von Analog Devices und NE5532ADR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ AktivSpezifikationsvergleich
| Parameter | AD823ARZ | NE5532ADR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | J-FET | — |
| Number of Circuits | 2 | — |
| Ausgangstyp | Rail-to-Rail | Rail-to-rail output |
| Slew Rate | 25 V/µs | 9 V/µs |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| Betriebstemperatur | -40°C ~ +85°C | — |
| Gehäuse / Bauform | 8-SOIC | — |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Product Type | — | Dual low-noise operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Betriebstemperaturbereich | — | 0°C to +70°C for NE5532x |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Gehäuse | — | 8-pin SOIC |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |