AD823ARZ vs NE5532ADR Comparación
Comparación detallada lado a lado de AD823ARZ por Analog Devices y NE5532ADR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActivoComparación de especificaciones
| Parámetro | AD823ARZ | NE5532ADR |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | J-FET | — |
| Number of Circuits | 2 | — |
| Tipo de salida | Rail-to-Rail | Rail-to-rail output |
| Slew Rate | 25 V/µs | 9 V/µs |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| Temperatura de funcionamiento | -40°C ~ +85°C | — |
| Encapsulado / Carcasa | 8-SOIC | — |
| Tipo de montaje | Surface Mount | Surface mount |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Product Type | — | Dual low-noise operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Rango de temperatura de funcionamiento | — | 0°C to +70°C for NE5532x |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Encapsulado | — | 8-pin SOIC |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |