AD823ARZ vs NE5532ADR Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci AD823ARZ disebabkan oleh Analog Devices dan NE5532ADR disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ AktifPengandingan Spesifikasi
| Parametr | AD823ARZ | NE5532ADR |
|---|---|---|
| Merek | Analog Devices | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | J-FET | — |
| Number of Circuits | 2 | — |
| Jenis Output | Rail-to-Rail | Rail-to-rail output |
| Slew Rate | 25 V/µs | 9 V/µs |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| Suhu Operasi | -40°C ~ +85°C | — |
| Kemasan / Case | 8-SOIC | — |
| Jenis Pemasangan | Surface Mount | Surface mount |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Product Type | — | Dual low-noise operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Gambaran Suhu Operasi | — | 0°C to +70°C for NE5532x |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Kemasan | — | 8-pin SOIC |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |