AD823ARZ vs NE5532ADR Comparaison
Comparaison détaillée côte à côte de AD823ARZ par Analog Devices et NE5532ADR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActifComparaison des spécifications
| Paramètre | AD823ARZ | NE5532ADR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | J-FET | — |
| Number of Circuits | 2 | — |
| Type de sortie | Rail-to-Rail | Rail-to-rail output |
| Slew Rate | 25 V/µs | 9 V/µs |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| Température de fonctionnement | -40°C ~ +85°C | — |
| Boîtier / Format | 8-SOIC | — |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Product Type | — | Dual low-noise operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Plage de température de fonctionnement | — | 0°C to +70°C for NE5532x |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Boîtier | — | 8-pin SOIC |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |