AD977ARZ vs AD977ARS Vergleich
Detaillierter Direktvergleich von AD977ARZ von Analog Devices und AD977ARS von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD977ARZ | AD977ARS |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Unknown | Aktiv |
| Auflösung | 16 bit | 16 bit |
| Abtastrate | 100 kSPS | — |
| Number of Inputs | 1 input | — |
| Input Type | Single-ended | — |
| ADC Architecture | Successive approximation, switched-capacitor | — |
| Analog Supply Voltage Range | 4.75 V to 5.25 V | — |
| Nominal Supply Voltage | 5 V | — |
| Internal Reference Voltage | 2.5 V | 2.5 V |
| Data Interface | Serial | Serial interface |
| Maximum Power Dissipation | 100 mW | 100 mW |
| Factory Calibration | Factory calibrated to minimize gain, offset, and nonlinearity errors | Factory calibrated |
| Gehäuse | 20-pin SOIC | 28-pin SSOP |
| Montageart | Surface mount | Surface mount |
| Analog Inputs | 1 unipolar analog input | — |
| Power-Down Mode | Available | Supported |
| Betriebstemperaturbereich | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Supply Voltage | [DATA_NEEDED: Digital supply voltage range] | — |
| Input Full-Scale Range | [DATA_NEEDED: Analog input full-scale range] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | — |
| INL | [DATA_NEEDED: Integral nonlinearity] | — |
| ENOB | [DATA_NEEDED: Effective number of bits] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| ADC Type | — | Successive-approximation switched-capacitor ADC |
| Throughput Rate | — | 100 kSPS |
| Versorgungsspannung | — | 5 V |
| Supply Configuration | — | Single supply |
| Input Channels | — | 1 channel |
| Unipolar Input Range | — | 0 V to 5 V or 0 V to 4 V |
| Bipolar Input Range | — | +/-5 V or +/-3.3 V |
| Analog Input Type | — | Single-ended input |
| Conversion Architecture | — | SAR with switched-capacitor internal DAC |
| Reference Source | — | Internal 2.5 V reference; external reference support [DATA_NEEDED: external-reference details] |
| REACH Status | — | [DATA_NEEDED: REACH status] |