AD977ARZ vs AD977ARS तुलना

विस्तृत दोनों ओर की तुलना AD977ARZ द्वारा Analog Devices और AD977ARS द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD977ARZ AD977ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARZ Unknown
Analog Devices
AD977ARS AD977ARS - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARS - 16-Bit 100 kSPS SAR ADC | Analog Devices

AD977ARS ✓ सक्रिय

विशेषता तुलना

पैरामीटर AD977ARZ AD977ARS
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति Unknown सक्रिय
रेज़ोल्यूशन 16 bit 16 bit
सैंपलिंग रेट 100 kSPS —
Number of Inputs 1 input —
Input Type Single-ended —
ADC Architecture Successive approximation, switched-capacitor —
Analog Supply Voltage Range 4.75 V to 5.25 V —
Nominal Supply Voltage 5 V —
Internal Reference Voltage 2.5 V 2.5 V
Data Interface Serial Serial interface
Maximum Power Dissipation 100 mW 100 mW
Factory Calibration Factory calibrated to minimize gain, offset, and nonlinearity errors Factory calibrated
पैकेज 20-pin SOIC 28-pin SSOP
माउंटिंग प्रकार Surface mount Surface mount
Analog Inputs 1 unipolar analog input —
Power-Down Mode Available Supported
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: Operating temperature range] [DATA_NEEDED: operating temperature range]
Digital Supply Voltage [DATA_NEEDED: Digital supply voltage range] —
Input Full-Scale Range [DATA_NEEDED: Analog input full-scale range] —
Input Impedance [DATA_NEEDED: Input impedance] —
SNR [DATA_NEEDED: Signal-to-noise ratio] —
INL [DATA_NEEDED: Integral nonlinearity] —
ENOB [DATA_NEEDED: Effective number of bits] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
ADC Type — Successive-approximation switched-capacitor ADC
Throughput Rate — 100 kSPS
सप्लाई वोल्टेज — 5 V
Supply Configuration — Single supply
Input Channels — 1 channel
Unipolar Input Range — 0 V to 5 V or 0 V to 4 V
Bipolar Input Range — +/-5 V or +/-3.3 V
Analog Input Type — Single-ended input
Conversion Architecture — SAR with switched-capacitor internal DAC
Reference Source — Internal 2.5 V reference; external reference support [DATA_NEEDED: external-reference details]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध